Presentation is loading. Please wait.

Presentation is loading. Please wait.

Calculated negative pressure developed in the lung plotted against the outside diameter of the suction catheter to the inside diameter of the airway. Calculated.

Published byΑριάδνη Κόρακας Modified over 5 years ago

Similar presentations

Presentation on theme: "Calculated negative pressure developed in the lung plotted against the outside diameter of the suction catheter to the inside diameter of the airway. Calculated."— Presentation transcript:

1 Calculated negative pressure developed in the lung plotted against the outside diameter of the suction catheter to the inside diameter of the airway. Calculated negative pressure developed in the lung plotted against the outside diameter of the suction catheter to the inside diameter of the airway. Each curve represents a catheter with a different wall thickness, expressed as the ratio of the catheter's inner diameter to outer diameter. (Data from reference 1.)‏ Christopher J Russian et al. Respir Care 2014;59:32-38 (c) 2012 by Daedalus Enterprises, Inc.

Download ppt "Calculated negative pressure developed in the lung plotted against the outside diameter of the suction catheter to the inside diameter of the airway. Calculated."

Similar presentations

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.
Forest plot of the diagnostic yield of combined transbronchial needle aspiration (TBNA) and transbronchial lung biopsy (TBLB) in patients with sarcoidosis.

Forest plot of the diagnostic yield of combined transbronchial needle aspiration (TBNA) and transbronchial lung biopsy (TBLB) in patients with sarcoidosis.
Residual volume (RV) to total lung capacity (TLC) ratio versus FEV1 % predicted. Residual volume (RV) to total lung capacity (TLC) ratio versus FEV1 %

Residual volume (RV) to total lung capacity (TLC) ratio versus FEV1 % predicted. Residual volume (RV) to total lung capacity (TLC) ratio versus FEV1 %
The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.

The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.
Airway pressure and flow waveforms during constant flow volume control ventilation, illustrating the effect of an end-inspiratory breath-hold. Airway pressure.

Airway pressure and flow waveforms during constant flow volume control ventilation, illustrating the effect of an end-inspiratory breath-hold. Airway pressure.
Trigger pressure-time product (PTP) with zero pressure support, with no leak, medium leak, and large leak. Trigger pressure-time product (PTP) with zero.

Trigger pressure-time product (PTP) with zero pressure support, with no leak, medium leak, and large leak. Trigger pressure-time product (PTP) with zero.
Relationship between the recruited volume and the arithmetic mean of the ratios of lung density at PEEP 15 cm H2O to lung density at PEEP 5 cm H2O (μP15/P5)

Relationship between the recruited volume and the arithmetic mean of the ratios of lung density at PEEP 15 cm H2O to lung density at PEEP 5 cm H2O (μP15/P5)
Spearman rank correlation between absolute humidity and the patient's core temperature with the Humid-Heat device. Spearman rank correlation between absolute.

Spearman rank correlation between absolute humidity and the patient's core temperature with the Humid-Heat device. Spearman rank correlation between absolute.
Lung CT images were obtained while tracing the curve in static conditions. Lung CT images were obtained while tracing the curve in static conditions. Note.

Lung CT images were obtained while tracing the curve in static conditions. Lung CT images were obtained while tracing the curve in static conditions. Note.
Schematic illustration of upper airway anatomical dead space volume (VD) during unidirectional breathing. Schematic illustration of upper airway anatomical.

Schematic illustration of upper airway anatomical dead space volume (VD) during unidirectional breathing. Schematic illustration of upper airway anatomical.
Matrix used to calculate the kappa statistic.

Matrix used to calculate the kappa statistic.
Lung simulator diagram of airway pressure release ventilation (APRV): volume (yellow), lung pressure (white), and flow (orange)/time curve. Lung simulator.

Lung simulator diagram of airway pressure release ventilation (APRV): volume (yellow), lung pressure (white), and flow (orange)/time curve. Lung simulator.
Picture of bubble PEP devices.

Picture of bubble PEP devices.
A: Pressure (green) and volume (black)/time curve in airway pressure release ventilation (APRV). A: Pressure (green) and volume (black)/time curve in airway.

A: Pressure (green) and volume (black)/time curve in airway pressure release ventilation (APRV). A: Pressure (green) and volume (black)/time curve in airway.
Outline of the distal lung regions in haematoxylin and eosin-stained lung tissue [115, 116] showing the inner airway wall (green arrowheads), smooth muscle.

Outline of the distal lung regions in haematoxylin and eosin-stained lung tissue [115, 116] showing the inner airway wall (green arrowheads), smooth muscle.
Likert-scale agreement ratings regarding the use of extubation readiness parameters by pediatric critical care physicians. Likert-scale agreement ratings.

Likert-scale agreement ratings regarding the use of extubation readiness parameters by pediatric critical care physicians. Likert-scale agreement ratings.
Example airway pressure and rib-cage impedance in a premature infant supported with the biphasic mode of SiPAP (“sigh” positive airway pressure) from the.

Example airway pressure and rib-cage impedance in a premature infant supported with the biphasic mode of SiPAP (“sigh” positive airway pressure) from the.
Simulated screenshot of flow starvation in volume control continuous mandatory ventilation. Simulated screenshot of flow starvation in volume control continuous.

Simulated screenshot of flow starvation in volume control continuous mandatory ventilation. Simulated screenshot of flow starvation in volume control continuous.
A: Computed tomogram shows bilateral dependent consolidation in a patient with ARDS, as well as ground-glass opacities in the non-dependent lung. A: Computed.

A: Computed tomogram shows bilateral dependent consolidation in a patient with ARDS, as well as ground-glass opacities in the non-dependent lung. A: Computed.
A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.

A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.

Similar presentations

Ads by Google