1. Tyler Butikofer Tom Carr
ADS V1.0 RPS Check
Tyler Butikofer
Tom Carr
Western Electricity Coordinating Council

2. Brief Review of Process
Collected all generation that complies with RPS goals
Allocated the generation to state/providence
Are
Calculated RPS requirements for each state/providence
Calculated if RPS requirements are met for each state/providence
Western Electricity Coordinating Council

3. Western Electricity Coordinating Council
Energy Requirement
Western Electricity Coordinating Council

4. RPS Summary by Development Status
Western Electricity Coordinating Council

5. Load Served by State and Type (GWh)
Western Electricity Coordinating Council

6. Load Served by State and Type
Western Electricity Coordinating Council

7. tbutikofer@wecc.biz 801-819-7604
Questions?
Western Electricity Coordinating Council

8. Appendix A Calculating RPS Targets
Western Electricity Coordinating Council

9. RPS Check for RAC/WECC Studies
Thomas Carr
Western Interstate Energy Board
January 31, 2018
Western Electricity Coordinating Council

10. How to calculate RPS energy targets for states/provinces in the Western Interconnection
General RPS framework
Identify key RPS provisions for states/provinces
Derive state/provincial loads and sales from BA forecasts
Calculate RPS energy targets (GWh) for each state/province

11. General RPS Framework General rule across jurisdictions:
Base (GWh) x Rate (%) = RPS RE (GWh)
RPS RE = Target level of renewable energy
Base = Sales of electricity by utilities covered by the RPS policy (e.g. IOUs, coops, munis, etc)
Rate = Percentage of electricity sales that must be from renewable generation (e.g., wind, solar, geothermal, biomass)
Western Electricity Coordinating Council

12. 2c. Derive State/Provincial loads and sales from BA forecasts
WECC collects load forecasts from Balancing Areas (BA)
Allocate 40 BA load forecasts into 12 states, 2 provinces, MX
9 BAs cover multiple states

13. State/Province Loads and Sales
- Allocate BA load to each state/province
- Convert loads to sales assuming 6% T&D loses
- Sum across each state/province
- California updated by CEC forecast CED
Western Electricity Coordinating Council

14. State/Province Loads and Sales cont.

15. 9 BAs with footprint over multiple states
Western Electricity Coordinating Council

16. 2d. Calculate RPS Targets
Apply policy rules for each jurisdiction
Base (GWh) x Rate (%) = RPS RE (GWh)

17. 2028 Loads, Sales and RPS Targets
Western Electricity Coordinating Council

18. Appendix B Gathering RPS Units and Allocating to States/Providences
Western Electricity Coordinating Council

19. Western Electricity Coordinating Council
Gathering RPS Units
Select all renewable sub-types that apply
Biomass
DG-BTM
Geothermal
Hydro RPS (California)
Solar PV
Solar Thermal
Wind Turbine
Western Electricity Coordinating Council

20. Determining State/Prov Allocations
If located in Alberta or California, allocated to Alberta or California, respectively
If located in other states, looked for Power Purchase Agreements (PPAs) or other data from energy websites or utility websites (reference is sited in workbook)
If we couldn’t locate PPAs, the resource was allocated to the state for which it was locate for states with a RPS
Western Electricity Coordinating Council