1. Panasonic System Networks PBX SE team
KX-NS1000 Step by Step Guide E1 Adapter / PRI Adapter KX-NS8188 / KX-NS8290
September 11, 2013
Panasonic System Networks PBX SE team 1 1

2. 1. Introduction
When customers want to use IP-Phone mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with trunk adapter is recommended. Activation key for IP trunk is not required to connect E1 / PRI adapter. Trunk adapter cannot be connected with other PBX using SIP.
Panasonic KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
PRI30
Model
Specifications
KX-NS8188X
E1 adapter on SIP trunk
KX-NS8290CE
PRI30 adapter on SIP trunk
KX-NS8290X
PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
KX-NS1000
IP Trunk AK
PRI Card
IP Network
KX-NCS0290
215 mm (W) 44 mm (H) 200 mm (D)
500g
KX-NT
KX-UT
Other SIP Phone
SIP Softphone 2

3. 2. Stacking Card
Reference
When customer has Panasonic PBX now, they can add IP capacity and built-in solution using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX. KX-TDA0131/0132 is installed instead of MPR card. This configuration is useful for new customer also to increase SLT and so on.
KX-NS0130
Stacking card for NS100
KX-NS0131
Stacking card for NCP
KX-NS0132
Stacking card for TDA/TDE
Before adding KX-NS1000
After adding KX-NS1000
Analog CO
Analog CO
Direct Connection like TDE600 to TDE620
KX-TDE
KX-TDE
KX-NS1000
CO Card
CO Card
MPR Card
SC Card
SC Card
EXT Card
EXT Card
KX-NCS0130
100 % Feature Transparency like TDE600 and TDE620
IP Network
SLT
KX-DT w/ DSS Console
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
SLT
KX-DT w/ DSS Console 3

4. 3. Table of Contents Chapter Explanation 1 Overview 2 Specifications 3
Concept of programming for Public mode 4
Step by step programming for the trunk adapter 5
Step by step programming for KX-NS1000 6
Programming hint for Private mode (QSIG) 7
Demonstration guide 4

5. Chapter 1 Overview

6. 11. Capacity
Maximum 256 ch is available for E1 / PRI by adapter and IP trunk.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
Trunk
256
256 x 2
600
Legacy
IP incl E1/PRI adapter
SIP
H.323 48
48 x 2 = 96
Also useful to provide PRI/E1 with 2-ch Analog CO or 4 BRI.
PRI30 E1
PRI30 E1
SIP Provider
Trunk Adaptor
Trunk Adaptor
PRI30 E1
SIP Trunk (xx-ch)
SIP Trunk (30-ch)
SIP Trunk (30-ch)
PRI30
256ch
Trunk Adaptor
Analog CO
SIP Trunk (30-ch)
PRI Card
CO Card
Max. 256ch can be registered to SIP provider or the adapter.

7. 12. PRI Adapter - Fractional Service
Fractional service is also available. <Stand alone>
20ch E1/PRI
Trunk Adaptor
20ch
KX-NS1000
<One-look network>
20ch E1/PRI
60ch E1/PRI
10ch E1/PRI
Trunk Adaptor
Trunk Adaptor
Trunk Adaptor
Trunk Adaptor
Total 256ch
20ch
30ch
30ch
10ch
1st KX-NS1000 in Fukuoka
2nd KX-NS1000 in Tokyo
16th KX-NS1000 in Niseko

8. 13. PRI Adapter - QSIG
PRI adapter supports ISDN QSIG also to connect with other PBX. Activation key for IP trunk is not required for PRI adapter. Trunk adapter cannot be connected with other PBX using H.323.
KX-NS1000
PRI
H.323
Ext 2xx
IP Trunk AK
Trunk Adaptor
ISDN QSIG
Ext 1xx
KX-TDA/TDE/NCP or PBX by other maker
IP Network (VPN)
Ext 3xx
DN2IP table (Dial to IP) Dial 2xx to Dial 3xx to Dial 4xx to
Ext 4xx

9. 14. PRI QSIG – Capacity & Specification
H.323 is used for this configuration instead of SIP.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
IP incl E1/PRI adapter
256
SIP + PRI Adapter for Public
H PRI Adapter for QSIG 48
48 x 2 = 96
Features
NS8290
TDA0290 (Reference)
QSIG service
CLIP/CLIR
Yes
CNIP/CNIR
Call Forwarding (CF)
Call Transfer (CT)
Completion of Calls to Busy Subscriber (CCBS)
Network Direct Station Selection (NDSS)
Centralized Voice Mail
Network ICD Group
KX-NS8290
Trunk Adaptor
KX-NS0290
PRI Card
KX-NS1000

10. Chapter 2 Specifications

11. 21. Hardware Appearance Hardware Appearance is as follows. No.
Front
No.
Description 1
System LED 2
E1 / PRI line LED 3
DC Jack 4
LAN Port 5
LAN LED (Link) 6
LAN LED (Transmission Speed) 7
E1 / PRI line port 8
Initialize button (Not slide switch)
Back
Wall Mountain
Unpack the box and check the items below: Main Unit x 1 Screw x 2 Washer x 2

12. 22. PoE (Power over Ethernet)
KX-NS8188 / KX-NS8290 supports PoE. If PoE is not supported by network, AC adapter is required KX-A420 for Brazil KX-A239 for others *) These are same model of AC adapter for KX-UT phone.

13. 23. KX-NS8188 E1 Adapter
KX-NS8188 E1 adapter supports following features.
Features
NS8188
TDA0188 (Reference)
Signaling
DR2
Yes
E&M-C No
E&M-P
Dial Type
MFC-R2
DTMF
Pulse
Caller Number Notification (ANI)
Charge / Meter Pulse
Deny collect call for Brazil
Outgoing call auto disconnect E1
KX-NS8188
Trunk Adaptor
KX-TDA0188
KX-TDE
KX-NS1000

14. 24. KX-NS8290 PRI Adapter
KX-NS8290 PRI adapter supports following features.
Features
NS8290
NS0290 (Reference)
Mode
CO (Public)
Yes
Extension No
QSIG-master/slave (Private)
ISDN Carrier Service (Public)
CLIP / CLIR
COLP / COLR
CNIP /CNIR
CONP / CONR
Advice of charge
Call Forwarding
Call Hold
Call Transfer (incl. ISDN Centrex)
Tree-party conference
Malicious call identification
Generic keypad protocol
CCBS
ISDN - Virtual Private Network
E-911 (for PRI23)
“No” because these services by ISDN provider are not popular and PBX can support same feature basically.
Conf by PBX
Conf by ISDN
ISDN
KX-NS8290
Trunk Adaptor
KX-NS0290
PRI Card
KX-NS1000

15. 25. Solution with “Back-up Master”
Back-up is available automatically for SIP trunk incl E1 / PRI adapter, KX-NT/UT IP-phone.
PRI/E1 or SIP Provider
Back-up master PBX works as slave PBX usually. But it works as master PBX after master PBX stops working.
Trunk Adaptor
KX-NS1000 (2nd) Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 (1st) Master
KX-NT
KX-UT
KX-NT
KX-UT
PRI/E1 or SIP Provider
Trunk Adaptor
After master PBX stops working,
KX-NS1000 Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 Master
KX-NT
KX-UT
KX-NT
KX-UT

16. Chapter 3 Concept of Programming for Public Connection

17. 31. Concept of Programming - Adapter
The trunk adapter is PBX with E1 / PRI trunk and SIP extension. SIP trunk of KX-NS1000 is registered to SIP extension of the adapter. <Programming for the trunk adapter> Software of the adapter is basically same as KX-NS1000. Features except E1 / PRI and SIP extension are removed. Therefore programming method is very similar to KX-NS1000.
E1/ ISDN
- PRI configuration is same as programming for KX-NS1000 PRI card (KX-NS0290). E1 configuration is same as KX-TDE E1 card (KX-TDA0188) SIP extension configuration is same as KX-NS But SIP extension is programmed by default to 430 for E1 / PRI to 423 for PRI23
PRI
E1 / PRI
Trunk Adaptor
SIP Extension
30ch or 23ch
ID SIP Trunk
KX-TDA0188
PRI Card
KX-TDE
KX-NS1000
KX-NS0290 17

18. 32. Concept of Programming – NS1000
<Programming for KX-NS1000> The trunk adapter is basically SIP provider for KX-NS1000. Following has to be programmed. - IP address of the adapter as SIP server destination - SIP registration User ID (Password is not required.) - Connection Attribute : SIP Provider / Trunk Adapter
E1/ ISDN
E1 / PRI
Trunk Adaptor
SIP Extension
30ch or 23ch
ID SIP Trunk
KX-NS1000 18

19. 33. Concept of Programming - Call
<Programming for KX-NS CONT> Programming of the trunk adapter is not required for DDI / DIL incoming call from E1/PRI to SIP extension. It works like DIL 1:1 without programming and DDI number and caller ID are informed from the trunk adapter to KX-NS Programming of KX-NS1000 is required for DDI / DIL. Outgoing call is also programmed for KX-NS1000 instead of the trunk adapter. Therefore administrator has to access only KX-NS1000 to change extension number, DDI and so on after dealer installed.
E1 / ISDN
E1 / PRI
CH CH CH30
Trunk Adapter
DDI Caller ID
SIP Extension
SIP Trunk
KX-NS1000 19

20. Chapter 4 Step by Step Programming for Trunk Adapter
Trunk Adaptor
KX-NS1000

21. 41. Initialize
Operation and “SYSTEM” LED display is as follows. 1. Power On (Connect AC adapter or connect LAN with PoE) (a) Amber On (5 sec) (b) Amber rapid flash (5 sec) 2. During (b), keep pressing Initialize button for 1s. (c) Off (2 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash - Display of (b) finishes before 5 sec after operation of (2). - Display of (f) means success of initialization and awaiting “Easy set-up” of web maintenance console.
Trunk Adaptor
KX-NS1000
System LED
Initialize Button 21

22. 42. LED Indication LED indication is as follows. KX-NS1000 22
Trunk Adaptor
KX-NS1000 22

23. 43. PC Connection - 1
(1) Set IP address for example to your PC like first connection of KX-TDE or KX-NCP Trunk adapter does not have maintenance port with DHCP server Sub-net mask should be (2) Connect by Firefox Default IP address of trunk adapter is
Trunk Adaptor
KX-NS1000
KX-NS1000
DHCP Server
by default
Trunk Adapter
For demo, NS1000 with DHCP server function is useful to assign IP address of PC automatically.
for example
by default 23

24. 43. PC Connection - 2
(1) In 10 seconds from step in previous page, log-in menu is displayed. (2) Input “INSTALLER” as user and “1234” as password.
Trunk Adaptor
KX-NS1000 24

25. 44. Easy setup - Language selection
(1) Select language.
Trunk Adaptor
KX-NS1000 25

26. 44. Easy setup - 1 (1) Select Suffix of KX-NS1000 and area.
Trunk Adaptor
KX-NS1000
No need to change
If Suffix is changed, system restarts again after click [OK]. Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash 26

27. 44. Easy setup - 2
No need to change. - Adapter name is only for reference. - Time is used only for error log.
Trunk Adaptor
KX-NS1000 27

28. 44. Easy setup - 3
(1) Input IP address of trunk adapter in actual customer’s network. Get the IP address from IT manager. *) For demo, default is OK.
Trunk Adaptor
KX-NS1000 28

29. 44. Easy setup - 4
No need to change. - Time is used only for error log.
Trunk Adaptor
KX-NS1000 29

30. 44. Easy setup - 5
(1) Input password as you hope, click [Finish]. (2) Wait for 30 seconds.
Trunk Adaptor
KX-NS1000
If LAN setting is changed, system restarts again after click [OK]. Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash 30

31. 45. Maintenance Console - Top menu
If LAN setting is changed, (1) Remove the trunk adapter from LAN (2) Connect it to actual customer’s network. (3) Connect PC to IP address of trunk adapter using Firefox. (4) After log-in, following top menu is displayed. If LAN setting is not changed, following Top menu is displayed.
Trunk Adaptor
KX-NS1000 31

32. 45. Maintenance Console - 1
Software version can be confirmed as follows.
Trunk Adaptor
KX-NS1000 32

33. 45. Maintenance Console - 2
Parameter for PRI can be modified as follows. (Same as “PRI + 2 SLT” card)
Trunk Adaptor
KX-NS1000 33

34. 45. Maintenance Console - 3
IP address of adapter can be changed. (No need to change usually.)
Trunk Adaptor
KX-NS1000 34

35. 45. Maintenance Console - 4
Software can be updated by one step. (Not same as KX-NS1000) - Wait 15 minutes after clicking [Execute]. (Same as KX-NS1000.)
Trunk Adaptor
KX-NS1000 35

36. 45. Maintenance Console - 5 E1/ PRI Card diagnosis is supported.
Trunk Adaptor
KX-NS1000
Out of service can be assigned. This is required for software update also. 36

37. Chapter 5 Step by Step Programming for KX-NS1000

38. 51. KX-NS Out of Service
Install virtual SIP trunk card. Out of service is required for port or card before programming in following pages.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 38

39. 52. KX-NS1000 - Connection Attribute
Change connection attribute from “SIP provider” to “Trunk Adapter” for each channels or click [Trunk Adapter] button to change max. 30 ch at the same time.
Trunk Adaptor
Trunk Adaptor
Use this No need to program each ch.
KX-NS1000 39

40. 53. KX-NS1000 - Trunk Adapter button - 1
Input IP address of trunk adapter and click [Next]. - Trunk adapter name is for reference.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
Web maintenance console for the trunk adapter is opened.
For reference
Max. 16 Adapter *) If program manually not using “trunk adapter”, more than 16 adapter can be programmed. 40

41. 54. KX-NS1000 - Trunk Adapter button - 2
Select range to connect the trunk adapter instead of SIP provider. Select IP address and click [Finish]. If fractional service is used, set “20” for example. Otherwise NS1000 tries making call using 21ch to 30ch of PRI.
SIP Provider
Trunk Adaptor
Trunk Adaptor
KX-NS1000 41

42. 55. KX-NS1000 - Registration to SIP Server
Connection attribute were programmed by previous step. Parameters for registration to SIP server (E1/PRI adapter) were also programmed.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 42

43. 56. KX-NS CLIP
“PBX CLIP” has to be selected as follows to send CLIP on extension for outgoing call.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 43

44. 57. KX-NS In Service
Set In Service. - Other programming such as ARS, TRS is basically same as PRI for KX-TDE/NCP. - However it is required to program as next 2 pages additionally because I/F with trunk adapter is SIP.
E1 / ISDN
Trunk Adaptor
KX-NS1000
When E1/PRI line of trunk adapter is fault, trunk adapter stops communication with KX-NS1000. Therefore the SIP trunk ch of KX-NS1000 becomes fault. This specification is useful not to use the SIP ch automatically for ARS and so on. 44

45. 58. KX-NS Dialing Plan
Dialing plan has to be programmed for outgoing call because I/F with trunk adapter is SIP en-block dial. Otherwise extension caller has to wait for 10 seconds to hear ring back tone after dial to E1/PRI trunk adapter.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 45

46. 59. KX-NS1000 - DDI Modification
DDI first 3 digits has to be removed because I/F with trunk adapter is SIP. ID such as “401” + real DDI number is informed as DDI number from E1/PRI adapter to KX-NS1000.
E1 / ISDN
Trunk Adaptor
DDI 5101
DDI DDI
KX-NS1000
DDI 5101
Program DDI table. 46

47. 60. KX-NS1000 - DDI Destination
DDI destination programmed is also required. (Same as PRI+SLT2 card in KX-NS1000 or PRI card through stacking card ) 47

48. Chapter 6 Programming Hint for Private Mode (QSIG)

49. 61. Easy Setup for Adapter
“Private” has to be selected by easy setup mode.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx

50. 62. PRI QSIG mode for Adapter
QSIG (Slave) is assigned automatically after easy setup.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx

51. 63. H.323 programming for Adapter
H.323 destination programming of adapter is also required. Common IP address is assigned for any dial. (Not each dial)
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx
IP address of Back-up master PBX

52. 64. H.323 programming for KX-NS1000
H.323 destination programming of KX-NS1000 is required for adapter as well as other PBXs. Sole difference is that activation key for IP trunk is not required.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx
IP Network
Ext 3xx
DN2IP table (Dial to IP) Dial 2xx to Dial 3xx to Dial 4xx to
Ext 4xx

53. Chapter 7 Demonstration Guide

54. KX-TDE with 2 PRI Extension as ISDN provider
71. Configuration Example
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Ext Ext 31X Ext 32X (for test)
PRI Adaptor
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
Ext 101 CLIP 01311
Ext 102 CLIP 01312
Ext 201 CLIP 01321 54

55. KX-TDE with 2 PRI Extension as ISDN provider
72. Outgoing Call
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Dialing plan 3XX
Ext Ext 31X Ext 32X (for test)
DDI 321
Dial 321 (Remove 01 by ARS)
Dial 321
PRI Adaptor
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
DDI Program
Dial 0/
01311
Ext 101 CLIP 01311
Ext 102 CLIP 01312
Ext 201 CLIP 01321 55

56. KX-TDE with 2 PRI Extension as ISDN provider
73. Incoming Call
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Ext Ext 31X Ext 32X (for test)
Dial 312 (Remove 01 by ARS)
DDI 312
PRI Adaptor
DDI
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
DDI Program
PRI
01321
Dial 0/
Ext 101 CLIP 01311
Ext 102 CLIP 01312
Ext 201 CLIP 01321 56

57. 74. PRI Extension
DLC
PRI
PRI
Standard LAN cable can be used by this switch for PRI Extension.
Ext Ext 31X Ext 32X (for test)
PRI Adaptor
PRI 57

58. 75. KX-NS1000 – SIP Register Resending
“Register Resending Interval” has to be 10 seconds. If default value 300 seconds is used, it takes for 0 to 300 seconds to reconnect KX-NS1000 and trunk adapter, when trunk adapter returns IN Service from Out of Service or LAN is reconnected.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 58

59. Thank you !