1. To join the “Lake Hills Preparedness NET” using your Baofeng UV5R
1.) Turn it on by rotating the BIG dial on top all the way to maximum volume
The voice will say what MODE the radio is in
2.) Press orange “V/M” key until voice says “CHANNEL MODE”
Screen will show channel A on top and Channel B on bottom
The cannel number (1-128) is shown to far right for A & B
3.) Press BIG Blue “A/B” key until the small triangle cursor on the left points up
This set the radio to receive and transmit on A or top line
4.) Press “1” then “0” then “1” to change A (top line) to channel 101
The voice will call out each number as you press it
The top line should read “MT MITC” with “101” to the right
5.) Press BIG Blue “A/B” key until the small triangle cursor on the left points down
This set the radio to receive and transmit on B or bottom line
6.) Press “1” then “0” then “1” to change B (bottom line) to channel 101
The bottom line should read “ ” with “101” to the right
Now both A & B are set to channel 101
To change to a different channel repeat steps 3-6 using 001, 002….102.., 127, etc…
7.) Listen for the NET coordinator to announce the “Lake Hills Preparedness NET”
If you don’t hear this between 8:30 and 8:35 go to channel 102
8.) If you are just going to just listen you’re done, take notes on what you hear
9.) The NET coordinator will read through a script, listen and follow the instructions
Emergency messages and announcements are asked for first
10.) To join the NET listen for the NET coordinator to ask for “CALL INS”
11.) Wait until a short break when no one is talking press the PTT switch and say:
Your Call Sign “XXXXXX” your “NAME” & “LOCATION”
The NET coordinator will recognize you and repeat back your sign
The NET coordinator will take all the CALL INs and make a list
12.) The NET coordinator will then go through the list of CALL IN call signs
Starting at the top of the list
Each CALL IN will be given a chance to talk in order one at a time
13.) When the NET Cood. says your call sign it’s your turn to talk
Say your sign “XXXXXX” and “NAME”
Then proceed to say a few works or give info to the NET
If you want to talk to someone one-on-one request it now
The Net Coord will let you do it then or tell you to wait to the end
When your done say “BACK TO NET” & “OVER”
14.) Listen to the rest of the CALL INs to the NET
15.) The NET coordinator will then give a chance for anyone joining late to “CALL IN”
16.) If you requested to talk one on one with anyone wait until after the NET Coordinator closes the NET by saying “The LHC Preparedness NET is now closed”
If you have questions (and cell service is up) call Eric Parlow at (828) KD9BUT (AMRRON=EP104)
The NET will meet at the following days/times based on the LEVEL
Level 3: All’s Clear NET Meets Weekly Wednesdays at 8:30pm
Level 2: If Cell Phones and/or Internet are Down NET will meet Daily at 8:30pm
Level 1: Emergency/Martial Law NET meets Daily at 8:30am & 8:30pm
The Frequency the net will be on will depend on many variables and may change
Start at Channel 101, nothing heard go to 102, then 103, then 104
Channel 101, Mt Mitchell, Listen on (-0.6 offset) T=none EchoLink= WD4AG-R node
Channel 102, Hendersonville, Listen on (+0.6 offset) T=91.5
Channel 103, Mt Pisgah, Listen on (-0.6 offset) T=none
Channel 104, Ceasars Head SC Listen on (-0.6 offset) T=none EchoLink=W4NYK-R node
VERIFICATION CODE: M(1) A(2) S(3) H(4) E(5) D(6) R(7) O(8) C(9) K(0)
LH Simplex: 2M use (Ch 105) or NET in Hendersonville on (CH 106) Thur at 9pm
LH CH3 NET: FRS/GMRS CH3 and CB CH3 and MURS CH3
LH HF NET: 80m=3.818 LSB, 40m=7.242 LSB, 20m= USB
National NET see AMRRON SOI section 3
Weather is on Channels 086 to 092 Our area is WX 2 which is Channel 087
LOCATIONS
L1 = J&S Cafeteria AVL Back PK Lot
L2 = Lake Hills Church Back PK Lot
L3 = Field & Stream PK lot Biltmore Sq Mall
L4 = North Mills River Camp Ground First PK Lot
L5 = Biltmore Baptist Church Rear PK Lot
L6 = Fletcher Park Last Covered Picnic Shelter
L7 = Little River Vol Fire Station Crab Crk Rd
L8 = Rex’s Gun Range East Flat Rock
L9 = MT Pisgah Trail Head PK Lot off Blue Ridge Pkway
L10 = Montreat College Lookout Mtn Trailhead PK Lot
L11 = Cradle Of Forestry on SR 276 Pink Bed Fields PK Lot
L12 = Orchard Lake Campground Office outside Saluda
L13= DuPont St Forest Hooker Falls PK Lot near bridge
L14 = Skyland Fire Station East PK Lot
L15 = Davidson River Ranger Station near Brevard
L16 = Bent Creek near Powhatan Lake Dam
L17 = I26 N to NC-TN state line Sam’s Gap Pk & Apl Trail
L18 = Carolina Readiness Store in Waynesville
UV5R MENU OPTIONS
Press “MENU” key
Scroll using “^” or “v” key to desired MENU # shown below in table
Press “MENU” key again to enter edit mode
Use “^” or “v” key to change to desired preset value or enter a number
Press “MENU” key a third time to save the new setting
Press “EXIT” key to get back to main screen
# Abbreviation Desc Values SET TO
SQL Squelch Level >
1    STEP Frequency Step / 5 / 6.25 / 10 / 12.5 / 25  kHz  
2    TXP Transmit Power High = 4W  Low = 1W HIGH
3    SAVE Battery Save         =1:1    2=1:2    3=1:3    4=1:4 3
4    VOX Voice Operated Xmtr OFF / 1, 2 > OFF
5    WN Wideband / Narrowband WIDE / NARR WIDE
6    ABR Display Illumination Time OFF / 1 >10 secs 5 7    TDR Dual Watch / Dual Reception OFF / ON OFF
8    BEEP Keypad Beep OFF / ON OFF
9    TOT Transmission  Time Out Timer 15 / 30 / 45 / 60 >    R-DCS Rec - Digital Coded Squelch OFF / D023N > D754I OFF
11   R-CTCS Rec - Continuous Tone Coded Squelch OFF / 67.0 > Hz OFF
12   T-DCS Trans - Digital Coded Squelch OFF / D023N > D754I OFF
13   T-CTCS Trans - Continuous Tone Coded Squelch OFF / 67.0 Hz > Hz OFF
14   VOICE Voice Prompt OFF / ENG / CHI ENG 15   ANI-ID Automatic Number ID of Radio Set by Software cannot be changed    DTMFST DTMF Tone of transmit   OFF / DT-ST / ANI-ST / DT+ANI DT+ANI
17   S-CODE Signal Code   1 > 15 groups 1
18   SC-REV Scan Resume Method TO / CO / SE TO
19   PTT-ID When to send the PTT ID signal code OFF / BOT / EOT / BOTH OFF
20   PTT-LT Signal Code sending delay 0 > 50 ms 0
21   MDF-A Channel Mode A Display   (upper display) FREQ / CHAN / NAME NAME
22   MDF-B Channel Mode B Display   (lower display) FREQ / CHAN / NAME FREQ
23   BCL Busy Channel Lockout OFF / ON OFF
24   AUTOLK Automatic Keypad Lock OFF / ON OFF
25   SFT-D Frequency shift direction OFF / + / OFF
26   OFFSET Frequency shift amount > MHz in 10 kHz steps
27   MEM-CH Store a memory channel 000 > “ignore”
28   DEL-CH Delete a memory channel 000 > “ignore”
29   WT-LED Illumination / Display Color – Standby OFF / BLUE / ORANGE / PURPLE PURPLE
30   RX-LED Illumination / Display Color – Receive OFF / BLUE / ORANGE / PURPLE BLUE
31   TX-LED Illumination / Display Color – Transmit OFF / BLUE / ORANGE / PURPLE ORANGE
32   AL-MOD Alarm Mode SITE / TONE / CODE SITE
33   BAND Band Selection VHF / UHF VHF
34   TDR-AB Transmit in Dual Watch / Dual Reception OFF / A / B OFF
35   STE Squelch Tail Elimination OFF / ON OFF
36   RP-STE Repeater Squelch Tail  Elimination OFF / 1, 2, 3 > OFF
37   RPT Delay the squelch tail of repeater OFF / 1, 2, 3 > OFF
38   PONMSG Boot / Power On Display FULL / MGS FULL
39   ROGER Tone at end of transmission OFF / ON OFF
40   RESET Restore to default settings VFO / ALL NEVER USE THIS “ignore”

2. Channel Assignments
Channel
Name
Frequency
Comments
FRS 01 1
FRS 1 2
FRS 2 3
FRS 3
LHC FRS Primary 4
FRS 4 5
FRS 5 6
FRS 6 7
FRS 7 8
FRS 8 9
FRS 9 10
FRS 10 11
FRS 11 12
FRS 12 13
FRS 13 14
FRS 14 15
GMRS15
462.55 16
GMRS16 17
GMRS17
462.6 18
GMRS18 19
GMRS19
462.65 20
GMRS20 21
GMRS21
462.7 22
GMRS22 23
GMR15R 24
GMR16R 25
GMR17R 26
GMR18R 27
GMR19R 28
GMR20R 29
GMR21R 30
GMR22R
Channel Assignments
Channel
Name
Frequency
Comments 31
PMR 1 32
PMR 2 33
PMR 3 34
PMR 4 35
PMR 5 36
PMR 6 37
PMR 7 38
PMR 8 39
MURS 1
151.82 40
MURS 2
151.88 41
MURS 3
151.94
LHC MURS Primary 42
MURS 4
154.57 43
MURS 5
154.6 44
BUSRED 45
BUSPUR 46
MAR01A
156.05 47
MAR03A
156.15
LHC Marine Primary 48
MAR05A
156.25 49
MAR06
156.3 50
MAR07A
156.35 51
MAR08
156.4 52
MAR09
156.45 53
MAR10
156.5 54
MAR11
156.55 55
MAR12
156.6 56
MAR13
156.65 57
MAR14
156.7 58
MAR15
156.75 59
MAR16
156.8 60
MAR17
156.85

3. Channel Assignments Channel Name Frequency Comments91
WX 6
162.5 92
WX 7 93
SAREMT
155.16 94
HAM 42
146.42 95
HAM 52
146.52 96
HAM 55
146.55 97
HAMUHF
446 98
HAM U3
446.03
101
MT MITC
145.19
LHC Primary Net Repeater
102
BEARWAL
Second Repeater
103
MT PISG
146.76
Third Repeater
104
SPIVEY
146.91
Fourth Repeater
105
SIMPLEX 1
Primary Radio to Radio 2M
106
SIMPLEX 2
146.58
Second Radio to Radio 2M
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
Channel Assignments
Channel
Name
Frequency
Comments 61
MAR18A
156.9 62
MAR19A
156.95 63
MAR20A
157 64
MAR21A
157.05 65
MAR22A
157.1 66
MAR23A
157.15 67
MAR62 68
MAR63A 69
MAR65A 70
MAR66A 71
MAR67 72
MAR68 73
MAR69 74
MAR71 75
MAR72 76
MAR73 77
MAR74 78
MAR75 79
MAR76 80
MAR77 81
MAR78A 82
MAR79A 83
MAR80A 84
MAR81A 85
MAR88A 86
WX 1
162.55 87
WX 2
162.4
Local Weather 88
WX 3 89
WX 4 90
WX 5
162.45

4. To join the “Lake Hills Preparedness NET” using your Baofeng UV5R
1.) Turn it on by rotating the BIG dial on top all the way to maximum volume
The voice will say what MODE the radio is in
2.) Press orange “V/M” key until voice says “CHANNEL MODE”
Screen will show channel A on top and Channel B on bottom
The cannel number (1-128) is shown to far right for A & B
3.) Press BIG Blue “A/B” key until the small triangle cursor on the left points up
This set the radio to receive and transmit on A or top line
4.) Press “1” then “0” then “1” to change A (top line) to channel 101
The voice will call out each number as you press it
The top line should read “MT MITC” with “101” to the right
5.) Press BIG Blue “A/B” key until the small triangle cursor on the left points down
This set the radio to receive and transmit on B or bottom line
6.) Press “1” then “0” then “1” to change B (bottom line) to channel 101
The bottom line should read “ ” with “101” to the right
Now both A & B are set to channel 101
To change to a different channel repeat steps 3-6 using 001, 002….102.., 127, etc…
7.) Listen for the NET coordinator to announce the “Lake Hills Preparedness NET”
If you don’t hear this between 8:30 and 8:35 go to channel 102
8.) If you are just going to just listen you’re done, take notes on what you hear
9.) The NET coordinator will read through a script, listen and follow the instructions
Emergency messages and announcements are asked for first
10.) To join the NET listen for the NET coordinator to ask for “CALL INS”
11.) Wait until a short break when no one is talking press the PTT switch and say:
Your Call Sign “XXXXXX” your “NAME” & “LOCATION”
The NET coordinator will recognize you and repeat back your sign
The NET coordinator will take all the CALL INs and make a list
12.) The NET coordinator will then go through the list of CALL IN call signs
Starting at the top of the list
Each CALL IN will be given a chance to talk in order one at a time
13.) When the NET Cood. says your call sign it’s your turn to talk
Say your sign “XXXXXX” and “NAME”
Then proceed to say a few works or give info to the NET
If you want to talk to someone one-on-one request it now
The Net Coord will let you do it then or tell you to wait to the end
When your done say “BACK TO NET” & “OVER”
14.) Listen to the rest of the CALL INs to the NET
15.) The NET coordinator will then give a chance for anyone joining late to “CALL IN”
16.) If you requested to talk one on one with anyone wait until after the NET Coordinator closes the NET by saying “The LHC Preparedness NET is now closed”
If you have questions (and cell service is up) calll
Eric Parlow at (828) Call Sign KD9BUT (AMRRON=EP104)
The NET will meet at the following days/times based on the LEVEL
Level 3: All’s Clear NET Meets Weekly Wednesdays at 8:30pm
Level 2: If Cell Phones and/or Internet are Down NET will meet Daily at 8:30pm
Level 1: Emergency/Martial Law NET meets Daily at 8:30am & 8:30pm
The Frequency the net will be on will depend on many variables and may change
Start at Channel 101, nothing heard go to 102, then 103, then 104
Channel 101, Mt Mitchell, Listen on (-0.6 offset) T=none
Channel 102, Hendersonville, Listen on (+0.6 offset) T=91.5
Channel 103, Mt Pisgah, Listen on (-0.6 offset) T=none
Channel 104, Spivey Mt, Listen on (-0.6 offset) T=91.5
CH CH 106
LH Simplex: 2M use a NET in Hendersonville on Thur at 9pm
LH CH3 NET: FRS/GMRS CH3 and CB CH3 and MURS CH3
LH HF NET: 80m=3.818 LSB, 40m=7.242 LSB, 20m= USB
National NET see AMRRON SOI section 3
Weather is on Channels 086 to 092 Our area is WX 2 which is Channel 087
UV5R MENU OPTIONS
Press “MENU” key
Scroll using “^” or “v” key to desired MENU # shown below in table
Press “MENU” key again to enter edit mode
Use “^” or “v” key to change to desired preset value or enter a number
Press “MENU” key a third time to save the new setting
Press “EXIT” key to get back to main screen
# Abbreviation Desc Values SET TO
SQL Squelch Level >
1    STEP Frequency Step / 5 / 6.25 / 10 / 12.5 / 25  kHz  
2    TXP Transmit Power High = 4W  Low = 1W HIGH
3    SAVE Battery Save         =1:1    2=1:2    3=1:3    4=1:4 3
4    VOX Voice Operated Xmtr OFF / 1, 2 > OFF
5    WN Wideband / Narrowband WIDE / NARR WIDE
6    ABR Display Illumination Time OFF / 1 >10 secs 5 7    TDR Dual Watch / Dual Reception OFF / ON OFF
8    BEEP Keypad Beep OFF / ON OFF
9    TOT Transmission  Time Out Timer 15 / 30 / 45 / 60 >    R-DCS Rec - Digital Coded Squelch OFF / D023N > D754I OFF
11   R-CTCS Rec - Continuous Tone Coded Squelch OFF / 67.0 > Hz OFF
12   T-DCS Trans - Digital Coded Squelch OFF / D023N > D754I OFF
13   T-CTCS Trans - Continuous Tone Coded Squelch OFF / 67.0 Hz > Hz OFF
14   VOICE Voice Prompt OFF / ENG / CHI ENG 15   ANI-ID Automatic Number ID of Radio Set by Software cannot be changed    DTMFST DTMF Tone of transmit   OFF / DT-ST / ANI-ST / DT+ANI DT+ANI
17   S-CODE Signal Code   1 > 15 groups 1
18   SC-REV Scan Resume Method TO / CO / SE TO
19   PTT-ID When to send the PTT ID signal code OFF / BOT / EOT / BOTH OFF
20   PTT-LT Signal Code sending delay 0 > 50 ms 0
21   MDF-A Channel Mode A Display   (upper display) FREQ / CHAN / NAME NAME
22   MDF-B Channel Mode B Display   (lower display) FREQ / CHAN / NAME FREQ
23   BCL Busy Channel Lockout OFF / ON OFF
24   AUTOLK Automatic Keypad Lock OFF / ON OFF
25   SFT-D Frequency shift direction OFF / + / OFF
26   OFFSET Frequency shift amount > MHz in 10 kHz steps
27   MEM-CH Store a memory channel 000 > “ignore”
28   DEL-CH Delete a memory channel 000 > “ignore”
29   WT-LED Illumination / Display Color – Standby OFF / BLUE / ORANGE / PURPLE PURPLE
30   RX-LED Illumination / Display Color – Receive OFF / BLUE / ORANGE / PURPLE BLUE
31   TX-LED Illumination / Display Color – Transmit OFF / BLUE / ORANGE / PURPLE ORANGE
32   AL-MOD Alarm Mode SITE / TONE / CODE SITE
33   BAND Band Selection VHF / UHF VHF
34   TDR-AB Transmit in Dual Watch / Dual Reception OFF / A / B OFF
35   STE Squelch Tail Elimination OFF / ON OFF
36   RP-STE Repeater Squelch Tail  Elimination OFF / 1, 2, 3 > OFF
37   RPT Delay the squelch tail of repeater OFF / 1, 2, 3 > OFF
38   PONMSG Boot / Power On Display FULL / MGS FULL
39   ROGER Tone at end of transmission OFF / ON OFF
40   RESET Restore to default settings VFO / ALL NEVER USE THIS “ignore”

5. To join the “Lake Hills Preparedness NET” using your Baofeng UV5R
1.) Turn it on by rotating the BIG dial on top all the way to maximum volume
The voice will say what MODE the radio is in
2.) Press orange “V/M” key until voice says “CHANNEL MODE”
Screen will show channel A on top and Channel B on bottom
The cannel number (1-128) is shown to far right for A & B
3.) Press BIG Blue “A/B” key until the small triangle cursor on the left points up
This set the radio to receive and transmit on A or top line
4.) Press “1” then “0” then “1” to change A (top line) to channel 101
The voice will call out each number as you press it
The top line should read “MT MITC” with “101” to the right
5.) Press BIG Blue “A/B” key until the small triangle cursor on the left points down
This set the radio to receive and transmit on B or bottom line
6.) Press “1” then “0” then “1” to change B (bottom line) to channel 101
The bottom line should read “ ” with “101” to the right
Now both A & B are set to channel 101
To change to a different channel repeat steps 3-6 using 001, 002….102.., 127, etc…
7.) Listen for the NET coordinator to announce the “Lake Hills Preparedness NET”
If you don’t hear this between 8:30 and 8:35 go to channel 102
8.) If you are just going to just listen you’re done, take notes on what you hear
9.) The NET coordinator will read through a script, listen and follow the instructions
Emergency messages and announcements are asked for first
10.) To join the NET listen for the NET coordinator to ask for “CALL INS”
11.) Wait until a short break when no one is talking press the PTT switch and say:
Your Call Sign “XXXXXX” your “NAME” & “LOCATION”
The NET coordinator will recognize you and repeat back your sign
The NET coordinator will take all the CALL INs and make a list
12.) The NET coordinator will then go through the list of CALL IN call signs
Starting at the top of the list
Each CALL IN will be given a chance to talk in order one at a time
13.) When the NET Cood. says your call sign it’s your turn to talk
Say your sign “XXXXXX” and “NAME”
Then proceed to say a few works or give info to the NET
If you want to talk to someone one-on-one request it now
The Net Coord will let you do it then or tell you to wait to the end
When your done say “BACK TO NET” & “OVER”
14.) Listen to the rest of the CALL INs to the NET
15.) The NET coordinator will then give a chance for anyone joining late to “CALL IN”
16.) If you requested to talk one on one with anyone wait until after the NET Coordinator closes the NET by saying “The LHC Preparedness NET is now closed”
If you have questions (and cell service is up) calll
Eric Parlow at (828) Call Sign KD9BUT (AMRRON=EP104)
The NET will meet at the following days/times based on the LEVEL
Level 3: All’s Clear NET Meets Weekly Wednesdays at 8:30pm
Level 2: If Cell Phones and/or Internet are Down NET will meet Daily at 8:30pm
Level 1: Emergency/Martial Law NET meets Daily at 8:30am & 8:30pm
The Frequency the net will be on will depend on many variables and may change
Start at Channel 101, nothing heard go to 102, then 103, then 104
Channel 101, Mt Mitchell, Listen on (-0.6 offset) T=none
Channel 102, Hendersonville, Listen on (+0.6 offset) T=91.5
Channel 103, Mt Pisgah, Listen on (-0.6 offset) T=none
Channel 104, Spivey Mt, Listen on (-0.6 offset) T=91.5
CH CH 106
LH Simplex: 2M use a NET in Hendersonville on Thur at 9pm
LH CH3 NET: FRS/GMRS CH3 and CB CH3 and MURS CH3
LH HF NET: 80m=3.818 LSB, 40m=7.242 LSB, 20m= USB
National NET see AMRRON SOI section 3
Weather is on Channels 086 to 092 Our area is WX 2 which is Channel 087
UV5R MENU OPTIONS
Press “MENU” key
Scroll using “^” or “v” key to desired MENU # shown below in table
Press “MENU” key again to enter edit mode
Use “^” or “v” key to change to desired preset value or enter a number
Press “MENU” key a third time to save the new setting
Press “EXIT” key to get back to main screen
# Abbreviation Desc Values SET TO
SQL Squelch Level >
1    STEP Frequency Step / 5 / 6.25 / 10 / 12.5 / 25  kHz  
2    TXP Transmit Power High = 4W  Low = 1W HIGH
3    SAVE Battery Save         =1:1    2=1:2    3=1:3    4=1:4 3
4    VOX Voice Operated Xmtr OFF / 1, 2 > OFF
5    WN Wideband / Narrowband WIDE / NARR WIDE
6    ABR Display Illumination Time OFF / 1 >10 secs 5 7    TDR Dual Watch / Dual Reception OFF / ON OFF
8    BEEP Keypad Beep OFF / ON OFF
9    TOT Transmission  Time Out Timer 15 / 30 / 45 / 60 >    R-DCS Rec - Digital Coded Squelch OFF / D023N > D754I OFF
11   R-CTCS Rec - Continuous Tone Coded Squelch OFF / 67.0 > Hz OFF
12   T-DCS Trans - Digital Coded Squelch OFF / D023N > D754I OFF
13   T-CTCS Trans - Continuous Tone Coded Squelch OFF / 67.0 Hz > Hz OFF
14   VOICE Voice Prompt OFF / ENG / CHI ENG 15   ANI-ID Automatic Number ID of Radio Set by Software cannot be changed    DTMFST DTMF Tone of transmit   OFF / DT-ST / ANI-ST / DT+ANI DT+ANI
17   S-CODE Signal Code   1 > 15 groups 1
18   SC-REV Scan Resume Method TO / CO / SE TO
19   PTT-ID When to send the PTT ID signal code OFF / BOT / EOT / BOTH OFF
20   PTT-LT Signal Code sending delay 0 > 50 ms 0
21   MDF-A Channel Mode A Display   (upper display) FREQ / CHAN / NAME NAME
22   MDF-B Channel Mode B Display   (lower display) FREQ / CHAN / NAME FREQ
23   BCL Busy Channel Lockout OFF / ON OFF
24   AUTOLK Automatic Keypad Lock OFF / ON OFF
25   SFT-D Frequency shift direction OFF / + / OFF
26   OFFSET Frequency shift amount > MHz in 10 kHz steps
27   MEM-CH Store a memory channel 000 > “ignore”
28   DEL-CH Delete a memory channel 000 > “ignore”
29   WT-LED Illumination / Display Color – Standby OFF / BLUE / ORANGE / PURPLE PURPLE
30   RX-LED Illumination / Display Color – Receive OFF / BLUE / ORANGE / PURPLE BLUE
31   TX-LED Illumination / Display Color – Transmit OFF / BLUE / ORANGE / PURPLE ORANGE
32   AL-MOD Alarm Mode SITE / TONE / CODE SITE
33   BAND Band Selection VHF / UHF VHF
34   TDR-AB Transmit in Dual Watch / Dual Reception OFF / A / B OFF
35   STE Squelch Tail Elimination OFF / ON OFF
36   RP-STE Repeater Squelch Tail  Elimination OFF / 1, 2, 3 > OFF
37   RPT Delay the squelch tail of repeater OFF / 1, 2, 3 > OFF
38   PONMSG Boot / Power On Display FULL / MGS FULL
39   ROGER Tone at end of transmission OFF / ON OFF
40   RESET Restore to default settings VFO / ALL NEVER USE THIS “ignore”