1. Sizing and Product Code
This session supports you in making effective Coriolis quotes
The New, Web Based Sales Information Base
A new sizing tool will come. How to use the Selector by then
The Q Price List and Novelties in the Product Code
We love orders! But we still ask you for some more things

2. Your New Information Base

3. Your New Information Base

4. Your New Information Base
The Distributor Area comprises all we have on an actual basis, e.g.:
Technical Detail Bulletins and Graphics, RHE Software Tools
Sample Drawings, 2D and 3D, Sample Documentation
All Actual Certifications
Technical and Sales Presentations
Marketing Support: Logos, High Res Images, References

5. How To (Still) Use The Selector

6. How To (Still) Use The Selector
Liquid
No RHM suggestions due to high Max. Line Pressure?  Enter lower ‘dummy’ Pressure and contact
Despite Warning, these Velocities are OK for pressure over 10 bar: ✅

7. How To (Still) Use The Selector
Gas
When gas is not listed, e.g. take Molar Mass from Periodic Table
The Minimum Operating Density is 10 kg/m3. Down to 5 kg/m3 may work, but not recommended. Below that we must regret
Regarding Flow Speed:

8. How To (Still) Use The Selector
In step 4, before printing, please always check / edit
Or this may happen in the printout

9. Matching FaceLift Tubes with Selector
Example: RHM04L FaceLift Pricelist/Datasheet:
Selector Tool (Step 3)

10. How To (Still) Use The Selector
Depending on Fluid, the Selector may project ‘optimistic’ DP for Small, Classic RHMs with manifold
DP projections are ok for FaceLift RHM_L with manifold

11. Price List Q4-2017, Novelties
Full Product String for FaceLift or Classic RHM

12. Price List Q4-2017, Novelties
RHM_L (FaceLift) have New Temperature Codes
RHM04LN1P1PM0M0G1JO

13. Price List Q4-2017, Novelties
RHM_L (FaceLift) Electrical Connection is Part of Basic Product String
RHM04LN1P1PM0M0G1JO

14. Price List Q4-2017, Novelties
RHM_L (FaceLift) have a new Set of Ex Approval Codes

15. Price List Q4-2017, Novelties
RHE16, RHE2x Product Code e.g. RHE27-E1D1-SOS1-NNNN-NNN
(Legacy RHE code was e.g. RHE07A1NNN)

16. Orders Are Most Welcome
Your complete RMA Order Shortens Repair Lead Time
We do our Best For Urgencies - But Still Cannot Promise Lead Time

17. Orders Are Most Welcome
We have Thousands of References, We Just Hardly Know Them… Please support us!

18. Orders Are Most Welcome
We need to support us with Images and Stories!

19. Some FAQ By Customers
Corrosive Fluids: Please do only give Recommendations for Wetted Parts Material, no Warranty whatsoever. We as Vendors cannot control Customer’s Process, hence Customer must confirm Suitability
Maximum Size of Particles: Roughly 1/10 of Tube’s Inside Diameter. Example RHM30_P1 tubes have OD 33.4 x WT 2mm = ID 29.4mm  Particles can be up to ~3mm big
Minimum Straight Run Length: Not required, Flow Profile does not matter. However, Bends in Inlet Piping must be in the same Plane as Sensor Tubes (Parallel Flow Splitter)

20. Some FAQ By Customers
How big can be Gas Bubbles in Liquids? No Analytic Proof available yet, but: the Omega Oscillation Mechanism is more Resilient to Challenging Flow Conditions than other Coriolis Designs
Custody Transfer Certification: The Existing MID Certification covers RHE07C + RHM30 up to RHM160, Liquids from 600 to 1200 kg/m3. We can offer 3rd Party Calibrations with ISO Certification for all RHM Sizes / RHE Types

21. Thank you for your attention!
for questions please contact