Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 2 Polarized emission from printed perovskite nanocomposites.

Published byἈελλώ Τοκατλίδης Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 2 Polarized emission from printed perovskite nanocomposites."— Presentation transcript:

1 Fig. 2 Polarized emission from printed perovskite nanocomposites.
Polarized emission from printed perovskite nanocomposites. (A) Fourier images showing the angular emission from a nanowire bundle in the printed filament. Polar angle (θ) is plotted radially from 0° (center) to 70° (outer edge). Azimuthal angle (φ) is plotted around the circle starting at the right-hand side. Fourier image of a horizontal (left) and a vertical (right) filament on glass slide (cartoons, top). Angular emission pattern shows alignment of nanowires along filament axis. (B) Polarized emission of printed nanowire composites, measured using one linear polarizer installed in the emission path and two linear polarizers installed in both the excitation and emission paths. a.u., arbitrary units. (C) Artistic example of printed composites using their polarized emission (adapted from M. C. Escher, Sky and Water I art). Different parts are revealed for (left) no polarization, (middle) horizontal polarization, and (right) vertical polarization. Scale bars, 1 mm. Nanjia Zhou et al. Sci Adv 2019;5:eaav8141 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 2 Polarized emission from printed perovskite nanocomposites."

Similar presentations

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.

Fig. 2 Nonlinearities in a cavity-embedded perovskite single crystal.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Fig. 2 Box plots of water use with lateral lengths.

Fig. 2 Box plots of water use with lateral lengths.
Fig. 3 Oil, gas, and FP water variations with time.

Fig. 3 Oil, gas, and FP water variations with time.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 1 NP-free Ch-CNC droplets.

Fig. 1 NP-free Ch-CNC droplets.
Fig. 6 Different models of assembly of Ch-CNC droplets laden with Fe3O4NPs under magnetic field. Different models of assembly of Ch-CNC droplets laden.

Fig. 6 Different models of assembly of Ch-CNC droplets laden with Fe3O4NPs under magnetic field. Different models of assembly of Ch-CNC droplets laden.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 3 Swarm material properties.

Fig. 3 Swarm material properties.
Fig. 3 Glucose- and structure-dependent insulin release.

Fig. 3 Glucose- and structure-dependent insulin release.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.
Fig. 1 Reference-fixing experiment, setup.

Fig. 1 Reference-fixing experiment, setup.

Similar presentations

Ads by Google