1. ELECTROMAGNETISM

2. Electromagnetism
Electricity and magnetism are different facets of electromagnetism
a moving electric charge produces magnetic fields
changing magnetic fields move electric charges
This connection first elucidated by Faraday, Maxwell
Einstein saw electricity and magnetism as frame- dependent facets of unified electromagnetic force

3. No current, compass points to north Current, compass deflected
Electromagnetism
No current, compass points to north
Current, compass deflected
In 1820 Hans Ørsted noticed that a wire carrying an electric current caused a compass needle to deflect.

4. Magnetic field patterns around wires 1. Straight wire
TRIPLE ONLY
Magnetic field patterns around wires 1. Straight wire
The magnetic field consists of concentric circles centred on the wire.
The magnetic field is strongest near the wire.
This is shown by the field lines being closest together near to the wire.
The strength of the field increases if the eclectic current is increased.

5. The right-hand grip rule (for fields)
TRIPLE ONLY
The right-hand grip rule (for fields)
Grip the wire with the RIGHT hand.
The thumb is placed in the direction of the electric current.
The fingers show the direction of the circular magnetic field.

6. Complete the diagrams below:
TRIPLE ONLY
Complete the diagrams below:
Add field arrows
Add current direction
Add current direction
Add field arrows
Electric current into the page
Electric current out of the page

7. 3. Solenoid A solenoid is a coil of wire carrying an electric current.
TRIPLE ONLY
3. Solenoid
A solenoid is a coil of wire carrying an electric current.
The magnetic field is similar in shape to that around a bar magnet.
The strength of the field increases with:
the electric current
the number of turns in the coil N S

8. N S The right-hand grip rule (for poles)
TRIPLE ONLY
The right-hand grip rule (for poles)
Grip the coil with the RIGHT hand.
The fingers are placed in the direction that the eclectic current flows around the coil.
The thumb points towards the north pole end of the coil. N S

9. Complete the diagrams below:
TRIPLE ONLY
Complete the diagrams below:
1. Locate north
2. Locate south
3. Add current direction S N N
4. Add coils N

10. TRIPLE ONLY
Electromagnets
An electromagnet consists of a current carrying coil wrapped around an iron coil.

11. 7) Electromagnet :-
When electric current is passed through a coil of insulated wire wound around a piece of iron, it becomes a magnet. Such a magnet is called an electromagnet.
Activity :- Wind a piece of insulated wire around an iron nail in the form of a coil. Connect the free ends of the wire to an electric cell through a switch. Place some pins near the nail. When electric current is passed, the iron nail becomes a magnet and attracts the pins. When electric current is switched off, the nail loses its magnetism.

12. Electromagnets
Arranging wire in a coil and running a current through produces a magnetic field that looks a lot like a bar magnet
called an electromagnet
putting a real magnet inside, can shove the magnet back and forth depending on current direction: called a solenoid

13. Uses of electromagnets
TRIPLE ONLY
Uses of electromagnets
1. Scrap yard crane
The iron core of the electromagnet is a SOFT magnetic material.
When current flows the iron becomes strongly magnetised and so picks up the scrap iron and steel.
When the current is turned off the iron loses its magnetisation and so releases the scrap.

14. 2. The electric bell TRIPLE ONLY push switch spring electromagnet
When the push switch is closed current flows around the circuit turning on the electromagnet.
The soft iron armature is pulled towards the electromagnet and the hammer hits the gong.
This causes the contact switch to open cutting off the electric current.
The spring now pulls the armature back again closing the contact switch.
Current now flows again and the hammer hits the gong again.
push switch
spring
electromagnet
contact switch
soft iron armature
hammer
gong

15. TRIPLE ONLY
3. The relay switch
switch A
A relay switch is a way of using a low voltage circuit to switch remotely a high voltage (and possibly dangerous) circuit.
When switch A is closed, the small current provided by the cell causes the electromagnet to become magnetised..
The iron armature is then attracted to the electromagnet causing the springy contact switch B to close in the high voltage circuit.
iron armature
electromagnet
hinge
springy contact switch B
to high voltage circuit

16. Domestic circuit breakers
TRIPLE ONLY
4. Circuit breaker
Current normally flows between terminals A and B through the contact and the electromagnet.
When the current in a circuit increases, the strength of the electromagnet will also increase. This will pull the soft iron armature towards the electromagnet.
As a result, spring 1 pulls apart the contact and disconnecting the circuit immediately, and stopping current flow. A B 2 1
Domestic circuit breakers
The reset button can be pushed to bring the contact back to its original position to reconnect the circuit

17. Choose appropriate words to fill in the gaps below:
TRIPLE ONLY
Choose appropriate words to fill in the gaps below:
A wire carrying an electric ______ produces a magnetic field. This field increases in ________ if the current is increased.
A ________ is a coil of wire carrying an electric current. The field produced increases in strength if the number of _____ in the coil is increased or if _____ is placed inside the coil.
An ____________ consists of a coil of a solenoid wrapped around an iron core. Iron is a ______ magnetic material that loses its magnetisation once the current in the coil is switched off.
current
strength
solenoid
turns
iron
electromagnet
soft
WORD SELECTION:
solenoid
iron
strength
turns
electromagnet
current
soft

18. Induced Current
The next part of the story is that a changing magnetic field produces an electric current in a loop surrounding the field
called electromagnetic induction, or Faraday’s Law
Spring 2008

19. Reading Question
What is the current direction in this loop? And which side of the loop is the north pole?
1. Current clockwise; north pole on top
2. Current counterclockwise, north pole on top
3. Current clockwise; north pole on bottom
4. Current counterclockwise, north pole on bottom

20. Reading Question
What is the shape of the trajectory that a charged particle follows in a uniform magnetic field?
1. Helix
2. Parabola
3. Circle
4. Ellipse
5. Hyperbola

21. What is the shape of the trajectory that a charged particle follows in a uniform magnetic field?
1. Helix
2. Parabola
3. Circle
4. Ellipse
5. Hyperbola

22. Reading Question
An electron moves perpendicular to a magnetic field. What is the direction of ?
1. Left
2. Up
3. Down
4. Into the page
5. Out of the page

23. Reading Question
An electron moves perpendicular to a magnetic field. What is the direction of ?
1. Left
2. Up
3. Down
4. Into the page
5. Out of the page

24. The Electromagnetic Connection
A changing magnetic field produces an electric field, and a changing electric field produces a magnetic field.
Electric and Magnetic fields can produce forces on charges
An accelerating charge produces electromagnetic waves (radiation)
Both electric and magnetic fields can transport energy
Electric field energy used in electrical circuits, e.g., released in lightning
Magnetic field carries energy through transformer, for example

25. D.C. MOTORS

26. A simple DC motor has a coil of wire that can rotate in a magnetic field. The current in the coil is supplied via two brushes that make moving contact with a split ring. The coil lies in a steady magnetic field. The forces exerted on the current-carrying wires create a torque on the coil.

28. Motors convert electrical energy (from a battery or voltage source) into mechanical energy (used to cause rotation).

29. When a wire that carries current is placed in a region of space that has a
magnetic field, the wire experiences a force.
• The size of the force, which determines how fast the motor spins, depends on :
o the amount of current in the wire
o the length of the wire
o the strength of the magnetic field

30. The direction of the force, which determines which direction the motor spins,
depends on:
o the direction of the current in the wire
o the direction of the magnetic field

31. Working Principle of DC Motor
When the coil is powered, a magnetic field is generated around the armature. The left side of the armature is pushed away from the left magnet and drawn towards the right, causing rotation. When the coil turns through 900, the brushes lose contact with the commutator and the current stops flowing through the coil. However the coil keeps turning because of its own momentum.

33. VIDEO