1. 10/12/2019

2. 10/12/2019
MG14 FFF
MG14 SS

3. Do Not Exceed Maximum Oil Levels.
10/12/2019
Do Not Exceed Maximum Oil Levels.
HOT
COLD
Never exceed the Hot line when there is no basket in the vat. By over filling the tank, oil will move up into the foam zone when baskets are dropped, elevating the control panel temperatures and possibly over heating components.

4. Ensure Split Vat Racks Are Installed Properly
10/12/2019
Ensure Split Vat Racks Are Installed Properly
Correct
Incorrect
If your not careful, the split vat tube wracks can be installed backwards. This will raise the basket and force the user to over fill the vat to get good product coverage.

5. Should Always Be In Place
10/12/2019
Filter Pan Cover
Should Always Be In Place
Without the filter cover in place, oil can splash up on the burners, gas valve and blower motor causing service issues. Also debris can drop into the oil and contaminate it during the filter process.

6. Keep Burner Inlets Clear Of Dust, Grease, And Other Debris
10/12/2019
Keep Burner Inlets Clear Of Dust, Grease, And Other Debris
Always keep lint from building up on the opening of the burners.

7. Blower Cooling Vents Must Be
10/12/2019
Blower Cooling Vents Must Be
Cleaned Annually
The blower cooling fan should be cleaned annually. This can be accomplished without removing the motor, by brushing the outside fins while the unit is turned off.

8. Before After Oil Contamination Caused by a missing filter cover
10/12/2019
Before
After
Oil and dust contamination can lead to blower motor overheat, motor shut down on thermal overload, and premature motor failure.
Oil Contamination
Caused by a missing filter cover

9. McDonald’s Account Executive Manager, Technical Service
10/12/2019
Pitco Contacts
Joseph Pacentine
McDonald’s Account Executive
Don Yates
Manager, Technical Service
After Hours Technical
Support