1. FDM (Fused Deposition Modeling)
Table 1. Summary of the operating setup of the personal FDM 3D printer
Parameters
Values
Filament Material
PLA+
Colour
Light Blue
AM Process
FDM (Fused Deposition Modeling)
Layer Height (mm)
0.3, 0.2, 0.1
Infill Density (%)
Nozzle Diameter (mm)
0.5, 0.3, 0.2
Nozzle Temperature (°C)
220
Printing Speed (mm/s) 30
Extrusion of Material (layer width) (mm)
0.48
Speed for non-print moves (mm) 60
Horizontal Shells (top and bottom layer)
Vertical Shells 1
Cooling Rate
build-in
Bed Temperature (°C)
Room Temperature
Room Temperature (°C)
25±1
Relative Humidity (% RH)
40±5
Mohammad S. Alsoufi et al. How Surface Roughness Performance of Printed Parts Manufactured by Desktop FDM 3D
Printer with PLA+ is Influenced by Measuring Direction. American Journal of Mechanical Engineering, 2017, Vol. 5, No. 5,
doi: /ajme-5-5-4
© The Author(s) Published by Science and Education Publishing.