Presentation is loading. Please wait.

Presentation is loading. Please wait.

Ex vivo application and adhesion properties of GelCORE adhesives

Published byFrigyes Pap Modified over 5 years ago

Similar presentations

Presentation on theme: "Ex vivo application and adhesion properties of GelCORE adhesives"— Presentation transcript:

1 Fig. 3 Ex vivo application and adhesion properties of GelCORE adhesives.
Ex vivo application and adhesion properties of GelCORE adhesives. (A) Representative slit lamp photographs from rabbit eyes sealed by GelCORE bioadhesive, and (B) retention times of GelCORE bioadhesives, formed at various cross-linking times and prepolymer concentrations, on cornea tissues. (C) Representative optical coherence tomography images after ex vivo application of GelCORE adhesives to rabbit corneas at days 1, 14, and 28 after application. (D) Schematic of ex vivo burst pressure set up, including a syringe pump, a pressure sensor, and a recording system. (E) Average burst pressure of GelCORE adhesives formed by varying photocrosslinking time, compared to a commercially available ocular sealant, ReSure (control). Data are represented as means ± SD (**P < 0.01, ***P < 0.001, and ****P < ; n ≥ 4). [Photo credit: (A) Ahmad Kheirkhah, MEE, Harvard Medical School; (D) Ehsan Shirzaei Sani, UCLA] Ehsan Shirzaei Sani et al. Sci Adv 2019;5:eaav1281 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Ex vivo application and adhesion properties of GelCORE adhesives"

Similar presentations

Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)

Fig. 4 Altitudinal distributions of ice thickness change (m year−1) for the 650 glaciers. Altitudinal distributions of ice thickness change (m year−1)
Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 5 Front and side views of our autofocal prototype.

Fig. 5 Front and side views of our autofocal prototype.
Fig. 1 Typical presbyopic vision with various methods of correction.

Fig. 1 Typical presbyopic vision with various methods of correction.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 1 NP-free Ch-CNC droplets.

Fig. 1 NP-free Ch-CNC droplets.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 3 Glucose- and structure-dependent insulin release.

Fig. 3 Glucose- and structure-dependent insulin release.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.

Similar presentations

Ads by Google