Presentation is loading. Please wait.

Presentation is loading. Please wait.

Setup of the BiPAP Synchrony with an inspiratory filter and single-limb passive circuit, with the filter placed over the fixed leak to collect aerosol.

Published byUlrik Henriksen Modified over 5 years ago

Similar presentations

Presentation on theme: "Setup of the BiPAP Synchrony with an inspiratory filter and single-limb passive circuit, with the filter placed over the fixed leak to collect aerosol."— Presentation transcript:

1 Setup of the BiPAP Synchrony with an inspiratory filter and single-limb passive circuit, with the filter placed over the fixed leak to collect aerosol. Setup of the BiPAP Synchrony with an inspiratory filter and single-limb passive circuit, with the filter placed over the fixed leak to collect aerosol. A: setup with the ventilator (1), inspiratory filter (2), circuit (3), mask (4), NIVO placed at the elbow of the mask with the Aeroneb Pro controller attached by cable to the vibrating mesh nebulizer (5), nebulizer connector (6), and expiratory filter (7). B: setup with the ventilator (1), inspiratory filter (2), circuit (3), expiratory filter placed on a fixed leak (4), and oxygen cylinder with a regulator and flow meter with oxygen tubing (5) to drive the jet nebulizer (6) with a T-piece and 6 inches of 22-mm inner diameter tubing between the circuit and mask (7). An oxygen cylinder with a regulator and flow meter provided driving gas to the jet nebulizer. Valdecir C Galindo-Filho et al. Respir Care 2015;60: (c) 2012 by Daedalus Enterprises, Inc.

Download ppt "Setup of the BiPAP Synchrony with an inspiratory filter and single-limb passive circuit, with the filter placed over the fixed leak to collect aerosol."

Similar presentations

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.

Effect of nasal positive expiratory pressure (PEP) on 6-min walk test (6MWT) distance and pre- to post-exercise increase in lung volumes in each individual.
Effect of gas density on aerosol delivery from a pressurized metered-dose inhaler (pMDI) and jet nebulizer. A. Albuterol was administered via a pMDI and.

Effect of gas density on aerosol delivery from a pressurized metered-dose inhaler (pMDI) and jet nebulizer. A. Albuterol was administered via a pMDI and.
Placement of Aeroneb with HFOV

Placement of Aeroneb with HFOV
The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.

The changes in peak flow and inspiratory time between a minimum rise time (first 2 breaths) and a maximum rise time (last 2 breaths), with the Servo-i.
Trigger pressure-time product (PTP) with zero pressure support, with no leak, medium leak, and large leak. Trigger pressure-time product (PTP) with zero.

Trigger pressure-time product (PTP) with zero pressure support, with no leak, medium leak, and large leak. Trigger pressure-time product (PTP) with zero.
Lung simulator diagram of airway pressure release ventilation (APRV): volume (yellow), lung pressure (white), and flow (orange)/time curve. Lung simulator.

Lung simulator diagram of airway pressure release ventilation (APRV): volume (yellow), lung pressure (white), and flow (orange)/time curve. Lung simulator.
Trigger delays and leaks.

Trigger delays and leaks.
Model of relationship between ventilation and perfusion.

Model of relationship between ventilation and perfusion.
The Spectrum mask incorporates the leak port into the circuit, whereas the Mirage mask incorporates the leak port into the mask. The Spectrum mask incorporates.

The Spectrum mask incorporates the leak port into the circuit, whereas the Mirage mask incorporates the leak port into the mask. The Spectrum mask incorporates.
Single limb “non-vented” respiratory circuit with an exhalation valve (V) sited at a) the distal end of the inspiratory circuit or b) at the end of a short.

Single limb “non-vented” respiratory circuit with an exhalation valve (V) sited at a) the distal end of the inspiratory circuit or b) at the end of a short.
Picture of bubble PEP devices.

Picture of bubble PEP devices.
Examples of single limb “vented” circuits.

Examples of single limb “vented” circuits.
A ventilator and TTL test lung were used to simulate spontaneous breathing. A ventilator and TTL test lung were used to simulate spontaneous breathing.

A ventilator and TTL test lung were used to simulate spontaneous breathing. A ventilator and TTL test lung were used to simulate spontaneous breathing.
The high flow nasal cannula (HFNC) system incorporated an air/O2 blender with a flow meter and a heated humidifier. The high flow nasal cannula (HFNC)

The high flow nasal cannula (HFNC) system incorporated an air/O2 blender with a flow meter and a heated humidifier. The high flow nasal cannula (HFNC)
A: Pressure (green) and volume (black)/time curve in airway pressure release ventilation (APRV). A: Pressure (green) and volume (black)/time curve in airway.

A: Pressure (green) and volume (black)/time curve in airway pressure release ventilation (APRV). A: Pressure (green) and volume (black)/time curve in airway.
Use of continuous nasal ventilation in a young man with Duchenne muscular dystrophy and excessively weak buccal musculature. Use of continuous nasal ventilation.

Use of continuous nasal ventilation in a young man with Duchenne muscular dystrophy and excessively weak buccal musculature. Use of continuous nasal ventilation.
Likert-scale agreement ratings regarding the use of extubation readiness parameters by pediatric critical care physicians. Likert-scale agreement ratings.

Likert-scale agreement ratings regarding the use of extubation readiness parameters by pediatric critical care physicians. Likert-scale agreement ratings.
Simulated screenshot of flow starvation in volume control continuous mandatory ventilation. Simulated screenshot of flow starvation in volume control continuous.

Simulated screenshot of flow starvation in volume control continuous mandatory ventilation. Simulated screenshot of flow starvation in volume control continuous.
A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.

A: The Parker Flex-Tip tube (left) has a flexible tip pointing toward the center of the distal lumen. A: The Parker Flex-Tip tube (left) has a flexible.
Sensitivity, Specificity, Positive Predictive Value, Negative Predictive Value, Area Under the Curve, and 95% CIs for the 0, 10, 25, 50, and 100 SatSeconds.

Sensitivity, Specificity, Positive Predictive Value, Negative Predictive Value, Area Under the Curve, and 95% CIs for the 0, 10, 25, 50, and 100 SatSeconds.

Similar presentations

Ads by Google