Presentation is loading. Please wait.

Presentation is loading. Please wait.

MET 237 Computer Numerical Control Dr. Samy Oraby Summer 2016 Programming Circular Profiles [ Milling]

Published bysamy oraby Modified over 5 years ago

Similar presentations

Presentation on theme: "MET 237 Computer Numerical Control Dr. Samy Oraby Summer 2016 Programming Circular Profiles [ Milling]"— Presentation transcript:

1 MET 237 Computer Numerical Control Dr. Samy Oraby Summer 2016 Programming Circular Profiles [ Milling]

2 PAAET MET 237 | Dept. of Manufacturing Engineering Technology 8| Circular Interpolation Commands  Specifying The Plane For Circular Arc Interpolation. Circular interpolation is executed on a plane. Therefore, the plane must be identified before issuing the circular interpolation command. Figure 8 Plane selection.

3 PAAET MET 237 | Dept. of Manufacturing Engineering Technology 8| Circular Interpolation Commands  Circular Profile Milling (Absolute Coordinates)-Clockwise (G02). Figure 8-1 Circular profile-CW.

4 PAAET MET 237 | Dept. of Manufacturing Engineering Technology 8| Circular Interpolation Commands  Circular Profile Milling (Absolute Coordinates)-Counterclockwise (G03). Figure 8-2 Circular profile-CCW.

5 PAAET MET 237 | Dept. of Manufacturing Engineering Technology 8| Circular Interpolation Commands  Example. N01 G90 N02 G17 N03 G01 X3 Y.25 F10 N04 G02 X4.125 Y-3.9486 I0 J-2.25 Figure 8-2 Circular profile-CCW.

Download ppt "MET 237 Computer Numerical Control Dr. Samy Oraby Summer 2016 Programming Circular Profiles [ Milling]"

Similar presentations

Introduction to G-Code Programming

Introduction to G-Code Programming
Defining Rotations, Reflections, and Translations

Defining Rotations, Reflections, and Translations
O a polygon is a plane figure specified by a set of three or more coordinate positions, called vertices, that are connected in sequence by straight-Line.

O a polygon is a plane figure specified by a set of three or more coordinate positions, called vertices, that are connected in sequence by straight-Line.
NC and CNC machines and Control Programming

NC and CNC machines and Control Programming
Circular interpolation

Circular interpolation
Computer Integrated Manufacturing CIM

Computer Integrated Manufacturing CIM
G-Code Fundamentals.

G-Code Fundamentals.
Know the Code… Students will participate in an activity that will help them understand CNC programming and how machines read programmed information. http://www.global-trade.com.

Know the Code… Students will participate in an activity that will help them understand CNC programming and how machines read programmed information.
What is similar about these objects?

What is similar about these objects?
The distance from the center to any point on the shape stays the same.

The distance from the center to any point on the shape stays the same.
Do Now:.

Do Now:.
The code which controls the CNC machine.

The code which controls the CNC machine.
Manufacturing Automation

Manufacturing Automation
5/17/2015 1:32 AMConvex Hull1 obstacle start end.

5/17/2015 1:32 AMConvex Hull1 obstacle start end.
Rapid Prototyping Computer Numerical Control Programming (CNC) Some Machines: –Vertical machining Centers –CNC Turret lathes –Gantry Machines Geometric.

Rapid Prototyping Computer Numerical Control Programming (CNC) Some Machines: –Vertical machining Centers –CNC Turret lathes –Gantry Machines Geometric.
Outline 1. Introduction to CNC machine 2. Component and Function of CNC 3. Coordinate System.

Outline 1. Introduction to CNC machine 2. Component and Function of CNC 3. Coordinate System.
Computer Numerical Control

Computer Numerical Control
CNC Programming Prepared by Reza.

CNC Programming Prepared by Reza.
Geometry Lesson 6.2B – Reflections and Rotations

Geometry Lesson 6.2B – Reflections and Rotations
Inventables CNC Machine M. Neilsen. Synthetos gShield + Arduino with grbl.

Inventables CNC Machine M. Neilsen. Synthetos gShield + Arduino with grbl.

Similar presentations

Ads by Google