1. Introduction til standardization Danish national committe for Wind Turbines S-588

2. What is a standard? A standard is a agreement document A standard is a consensus document A standard is voluntary (Unless it is to be used for certification)

3. A life without standards would be rather complicated…

4. Standards have become an extremely important tool in globalization International European National 1906 1926 1961 1985 2012 Regulation of national marketsInternal markedGlobalization New Approach CEN Danish Standards CENELEC ISO IEC 1947

5. Types of standards - Product standards - Test standards - Terminology/pictogram standards - Management standards - Quality standards

6. Standards describe what we want to achieve, but not how! •Different heights of hats? •Stilts? •Staircases?

7. What does a standard consist of? • Introduction • Foreword • 1. Scope • 2. Normative references • 3. Definitions • 4. Symbols og abbreviations • 5. Requirements • Functional requirements • Test methods • Labelling • Annex A (normative) • Annex B (informative)

8. Access to Danish, European and international standardization through Danish Standards Three levels: •International Wind Turbines IEC TC 88 •European (Regional) Wind Turbines CLC TC 88 •Danish (National) The ‘Energy Agency’s Secretariat for the Danish Wind Turbine Certification Scheme’

9. Organization – ISO/IEC

10. International relations for the Danish mirror committee and its members Technical Committee TC 88 IEC/CENELEC Mirror Committee(S-588) Danish Standards Working Group (International) A Working groups (Danish) Experts Communications lines

11. AGH1Terminology in the field of wind turbines International relations for the Danish working group A01 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A01 Design and safety MT1 Design requirements for wind turbines MT2 Safety of small wind turbines WG3 Design requirements for offshore wind turbines PT61400-3-2Design requirements for floating offshore wind turbines PT61400-6 Tower and foundation design

12. MT 13 Measurement of mechanical loads International relations for the Danish working group A02 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A02 Procedurer for measurements PT 61400-12-2 Power performance measurements verification of electricity producing wind turbines MT 12-1 Wind turbine power performance testing WG 15 Assessment of site specific wind conditions for wind power stations

13. International relations for the Danish working group A03 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A03 Commumication JWG 25 Communications for monitoring and control of wind power plants

14. International relations for the Danish working group A04 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A04 Gear boxes JWG 1 Wind turbine gearboxes

15. International relations for the Danish working group A05 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A05 Testing and Certification of Wind Turbines - Rules and procedures MT 22 Revision of IEC WT 01, IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures WT CAC - Conformity Assessment Board – Wind Turbine Certification Advisory Committee SC22 CAB

16. International relations for the Danish working group A06 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A06 Electrotechnical main components to offshore wind Turbines IEC TC14/WG31 Power Transformers

17. International relations for the Danish working group A07 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A07 Noice MT 11 Acoustic noise measurement technique

18. International relations for the Danish working group A08 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A08 Lightning protection MT 24 Lightning protection for wind turbines

19. International relations for the Danish working group A09 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A09 Rotor blades MT 23 Full-scale structural testing of rotor blades PT 61400-5 Wind turbines - Part 5: Rotor blades

20. International relations for the Danish working group A10 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A10 Availability PT 61400-26 Availability for wind turbines and wind turbine plants

21. International relations for the Danish working group A11 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A11 Electrical test and simulation models WG 27 Wind turbines – Electrical simulation models for wind power generation MT 21 Measurement and assessment of power quality characteristics of grid connected wind turbines

22. International relations for the Danish working group A12 and its members IEC TC 88 Wind Turbines IEC DS/S-588 Wind Turbine DS A12 Protective measures CLC/TC 88/WG 03 Protective measures

23. International relations for the Danish working group A13 and its members IEC Conformity Assessment for Renewables, IECRE IEC DS/S-588 Wind Turbine DS A13 WT CAC IEC CAB/ WT CAC Conformity Assessment Board - Wind Turbine Certification Advisory Committee

24. How does the Danish Mirror Committee S-588 work? •All relevant documents are distributed from Danish Standards to the members of S-588 •Clarification of Danish vote and comments at enquiries •Members can participate in international meetings •Members can participate in international working groups •Presentation of the new work items •Implementation of standards

25. First to receive new knowledge about standards and future standards Direct network with colleagues, communities and customers where knowledge on specific issues is exchanged Influence by developing and writing the future standards at national or international level Standards, guidelines and handbooks disseminate knowledge in relevant areas Standardization provides competitive advantages Access to a unique national and international network of expertise Structure and systematics are keywords in standardization