Presentation is loading. Please wait.

Presentation is loading. Please wait.

29/08/2012 Jana Faes Meso scale modeling of the mechanical properties of steel- reinforced epoxy PhD Symposium December 2012 Jana Faes Wim Van Paepegem.

Published byAbdiel Mannering Modified over 10 years ago

Similar presentations

Presentation on theme: "29/08/2012 Jana Faes Meso scale modeling of the mechanical properties of steel- reinforced epoxy PhD Symposium December 2012 Jana Faes Wim Van Paepegem."— Presentation transcript:

1 29/08/2012 Jana Faes Meso scale modeling of the mechanical properties of steel- reinforced epoxy PhD Symposium December 2012 Jana Faes Wim Van Paepegem Department of Materials Science and Engineering, Ghent University FACULTY OF ENGINEERING

2 05/12/2012 Jana Faes 2 STEEL FILAMENT EPOXY MATRIX YARN (BUNDLE OF FILAMENTS) Meso scale modeling of steel reinforced epoxy

3 05/12/2012 Jana Faes 3 Carbon and glass fibre are BRITTLE Steel fibres are DUCTILE ELASTIC deformations up to failure (brittle) failure is avoided in applications research limited to elastic regime PLASTIC deformations & necking before failing (future) applications might involve damage research must focus on damage & failure Meso scale modeling of steel reinforced epoxy

4 05/12/2012 Jana Faes 4 Meso scale modeling of steel reinforced epoxy filament-matrix debonding yarn-matrix delamination fibre necking plastic matrix deformation

5 05/12/2012 Jana Faes 5 Macro Meso Micro structural level yarn level fiber level weft yarn warp yarn ONE YARN fiber filaments CARBON WHEELS WEAVE UNIT CELL Meso scale modeling of steel reinforced epoxy

6 05/12/2012 Jana Faes 6 GOAL composite unit cell Meso scale modeling of steel reinforced epoxy homogenisation homogeneous unit cell DEMAND Unit cell must behave as if it were part of the material structure periodic boundary conditions QUESTION Will these periodic boundaries still apply when looking at damage?

Download ppt "29/08/2012 Jana Faes Meso scale modeling of the mechanical properties of steel- reinforced epoxy PhD Symposium December 2012 Jana Faes Wim Van Paepegem."

Similar presentations

J.-N. Périé, S. Calloch, C. Cluzel and F. Hild

J.-N. Périé, S. Calloch, C. Cluzel and F. Hild
Structural scales and types of analysis in composite materials

Structural scales and types of analysis in composite materials
M.A.G. Silva, C. Cismasiu, C.G. Chiorean, Numerical Simulation of Impact on Composite Laminates Numerical Simulation of Impact on Composite Laminates.

M.A.G. Silva, C. Cismasiu, C.G. Chiorean, Numerical Simulation of Impact on Composite Laminates Numerical Simulation of Impact on Composite Laminates.
Chap.8 Mechanical Behavior of Composite

Chap.8 Mechanical Behavior of Composite
Failure Mechanisms in Twill-weave Laminates:

Failure Mechanisms in Twill-weave Laminates:
CHE 333 Class 18 Fracture of Materials.

CHE 333 Class 18 Fracture of Materials.
AS Physics Unit 11 Materials – Further Reading Mr D Powell.

AS Physics Unit 11 Materials – Further Reading Mr D Powell.
Dr. Alagiriswamy A A, Asst. Professor, Dept. of Physics, SRM-U, Chennai Dr. Alagiriswamy A A, (M.Sc, PhD, PDF) Asst. Professor (Sr. Grade), Dept. of Physics.

Dr. Alagiriswamy A A, Asst. Professor, Dept. of Physics, SRM-U, Chennai Dr. Alagiriswamy A A, (M.Sc, PhD, PDF) Asst. Professor (Sr. Grade), Dept. of Physics.
Dr. HABEEB HATTAB HABEEB Office: BN-Block, Level-3, Room-088 Ext. No.: 7292 Lecturer: Dr. HABEEB ALANI.

Dr. HABEEB HATTAB HABEEB Office: BN-Block, Level-3, Room Ext. No.: 7292 Lecturer: Dr. HABEEB ALANI.
A Micromechanical Model for Non-Linear Viscoelastic Particle Reinforced Polymeric Composite Materials – Undamaged State Martin Lévesque*, Katell Derrien*,

A Micromechanical Model for Non-Linear Viscoelastic Particle Reinforced Polymeric Composite Materials – Undamaged State Martin Lévesque*, Katell Derrien*,
E-mail address: kadirbilisik@gmail.com In-Plane Shear Properties of Multiaxis and Orthogonal 3D Woven Carbon/Epoxy Composites Kadir Bilisik Department.

address: In-Plane Shear Properties of Multiaxis and Orthogonal 3D Woven Carbon/Epoxy Composites Kadir Bilisik Department.
Micro-Scale Experiments and Models for Composite Materials PhD project duration: 1. January 2012 - 31. December 2014 Project type & funding: PhD-A project,

Micro-Scale Experiments and Models for Composite Materials PhD project duration: 1. January December 2014 Project type & funding: PhD-A project,
Plastics and their uses

Plastics and their uses
Bringing Science to Life Impact Modeling of Random Carbon Fiber Composites PI: Srdan Simunovic Haeng-Ki Lee, J. Michael Starbuck, Pakal Rahulkumar, Raymond.

Bringing Science to Life Impact Modeling of Random Carbon Fiber Composites PI: Srdan Simunovic Haeng-Ki Lee, J. Michael Starbuck, Pakal Rahulkumar, Raymond.
CHAPTER 7: MECHANICAL PROPERTIES

CHAPTER 7: MECHANICAL PROPERTIES
Material Testing.

Material Testing.
FATIGUE PERFORMANCE OF FRP AND RADIAL-PIN REINFORCEMENT ON MULTI-RING MASONRY ARCHES Clive Melbourne, Adrienn Tomor School of Computing, Science and Engineering,

FATIGUE PERFORMANCE OF FRP AND RADIAL-PIN REINFORCEMENT ON MULTI-RING MASONRY ARCHES Clive Melbourne, Adrienn Tomor School of Computing, Science and Engineering,
Materials Composites. Introduction The major problem in the application of polymers to engineering is their low stiffness and strength compared to steel.

Materials Composites. Introduction The major problem in the application of polymers to engineering is their low stiffness and strength compared to steel.
composite materials Department “ORGANIC CHEMISRTY AND TECHNOLOGY”

composite materials Department “ORGANIC CHEMISRTY AND TECHNOLOGY”
CHAPER THREE COMPOSITES MATERIALS REINFORCED POLYMER Introduction The major problem in the application of polymers in engineering is their low stiffness.

CHAPER THREE COMPOSITES MATERIALS REINFORCED POLYMER Introduction The major problem in the application of polymers in engineering is their low stiffness.

Similar presentations

Ads by Google