1. Planmeca ProX

2. Planmeca ProX New intraoral X-ray device
Optimal images for all diagnostic needs: variable kV and mA
Easy and fast to use: pre-programmed quick settings, practical design
Digital ready with Planmeca ProSensor. Peferct wokflow with Planmeca Romexis
Versatile installation options

3. Optimal images for all diagnostic needs
Small focal spot 0.4mm
small unsharpness
Optional long cone
Geometric requirements for good images are met

4. Optimal images for all diagnostic needs
50 kV
Lower anode voltage: higher contrast, more suitable for endodontic, apex and bone structure diagnosis
60 kV
Medium anode voltages: broader grey scale, suitable for caries detection
70 kV
Higher anode voltages: longest grey scale spectrum for periodontal disease diagnosis

5. Optimal images for all diagnostic needs
Variable milliamperes (2 - 7 mA) enable to use all the advantages of the modern digital imaging systems and new high-speed films.

6. Reduced radiation
Advantages of the constant potential (DC) X-ray generator
Reduced radiation dose by up to 25% when compared to conventional AC generators
Extremely good and uniform image contrast
Absolute reproducibility of images
Improved reliability and prolonged life span of the X-ray tube
The X-ray unit output is not affected by line voltage fluctuations.

7. Easy and fast to use Non-symmetric shape
Tube head and cone have a common smooth plane
easy targeting along the smooth surface
close to the patient’s chest in occlusal images

8. Easy and fast to use Smooth movements Drift-free positioning
Robust design
No vibrations
easy, quick and accurate positioning

9. Easy and fast to use 66 pre-programmed quick settings
modality selection to choose film, imaging plate or sensor
density setting
adult/child selection
periapicals for different teeth
occlusal
bite-wing / endo
Quick setting allow ALWAYS to have right exposure values for individual cases

10. Easy and fast to use
hand held control panel
remote exposure station

11. Digital ready with Planmeca ProSensor
Integrated magnetic connector for digital Planmeca ProSensor intraoral sensors
The Planmeca ProSensor interconnection cable is routed inside the X-ray unit arm, which results in a clear and clean working area with no interfering cables.
The imaging parameters (kV, mA, exposure time) are transferred to the imaging software to be recorded with the patient's images.

12. Mounting alternatives
Standard wall mount
Floor column mount
Single stud mount, coming 2012
Pass-through mount, coming 2012
Dental unit mount, coming 2012
Ceiling mount (also with operating light), coming 2012

13. The End
More information: Erkki Hiltunen Product Manager, X-rays tel: Mark Niemi tel:
12/2011