1. Diode Comparison: Schottky, SPA, Zener, TVS
Summary
Diode Description
Diode Characteristics
Diode Classification & Typical Applications
Details & Comparison of Diode Technologies
Device Parameter Comparison
Device Structure Comparison
I-V Curve and Capacitance Comparison
Application Comparison

2. Diode Description
All diodes share common characteristics. They are two-terminal electrical components that allow current to flow in one direction. This behavior is called “rectification”.
Today, they are mostly built from semiconductor materials (Silicon). Before semiconductors, they were implemented with vacuum tube technology.
To create a diode, you must form an electrical “junction”, usually by joining two dissimilar materials. The junction in a Shottky diode is created by joining a metal with semiconductor material.
Current Littelfuse diodes are formed by joining two different types of Silicon semiconductor materials (creating a P-N junction).
Littefuse diodes have two primary applications: power control and over-voltage (OV) protection.

3. Diode Characteristics
There are six important characteristics of diodes:
Forward Current (IF): The amount of forward current that can be continuously applied to the diode without failure. If intended for AC/power applications, this value will be specified as an average or RMS current.
Forward Voltage (VF): The amount of forward voltage present when a given forward current is applied.
Reverse Breakdown Voltage (VBR, VZ): OV Protection and Zener diodes are designed to take advantage of this characteristic. This value determines the limiting (or clamping) voltage presented to an application that is subject to an over-voltage event (ESD, Lightning Surge, AC Power-Cross) or, the regulation voltage for power supplies.
Reverse Stand-Off Voltage (VR): Typically, the guaranteed maximum reverse voltage that can be applied without the diode going into breakdown (OV protection diodes).
Reverse Current-Leakage (IR): The current-leakage when a given reverse voltage is applied (OV protection diodes).
Junction Capacitance (CJ): For both power and OV protection diodes, this characteristic is undesired but unavoidable. Reducing the size of the semiconductor chip will minimize capacitance but, it will also limit current-handling capability. The value is variable and depends on the amount of reverse voltage applied.

4. Diode Characteristics
Voltage vs. Current (VI) Plot IF
Forward
VBR, VZ VR VF IR
Reverse
Common Symbol
Anode
Cathode
Forward Current

5. Littelfuse Diode Classifications
Application
Remarks
Conventional Diode, Rectifier
Power Control
Useful for “steering” high currents; converting AC to DC. Typically found in large packages such as TO-220.
Zener Diode
Useful for regulation of DC voltage in power supplies. Typically found in medium-size to large packages (Axial, TO-220).
Silicon Avalance Diode (SAD), Transient Voltage Suppressor (TVS)
OV Protection
Useful for protecting circuits exposed to high-energy events such as lightning surges or voltage transients from mechanical switching of electrical circuits (EFT). Typically found in medium-size packages (Axial, DO-214).
Diode Array
Diode Arrays fall into the more broad category of Silicon Protection Arrays (SPA), which are targeted for ESD protection. Typically found in small surface-mount packages (SOIC-8, SOT-23, SC-70, etc …)

6. Other Diode Classifications or Technologies
Application
Remarks
Shottky Diode
Power Control
Useful for high-frequency (HF) rectification required for switch-mode power supplies.
Varactor Diode
RF Tuning
Only known application of diodes that takes advantage of the junction capacitance characteristic.

7. Details of Diode Technologies
A Schottky diode is formed by a metal to semiconductor junction. Electrically, it conducts by the majority carrier and possesses fast response with lower current-leakage and forward bias voltage (VF). Schottky diodes are widely used in high frequency circuits.
Zener diodes are formed by a heavily doped P-N semiconductor junction. There are two physical effects which can be referred to as a Zener state (Zener effect and Avalanche effect). Zener effect occurs when there is a low reverse voltage applied to the P-N junction which conducts due to quantum effect. Avalanche effect occurs when a larger than 5.5 Volts voltage applied reversely to the PN junction during which the generated electron-hole pair collide with the lattice. Zener diodes based on the Zener effect are widely used as voltage reference sources in electronics circuitry.
A TVS diode is formed by a specially designed P-N semiconductor junction for surge protection. The PN junction is usually coated to prevent premature voltage arcing during non conducting state. When there is a transient voltage event, the TVS diodes conducts to clamp the transient voltage using the Avalanche effect. TVS diodes are widely used as an over voltage circuit protection device in telecommunications, general electronics, and digital consumer markets for lightning, ESD, and other voltage transient protection.
SPA stands for Silicon Protection Arrays. It is an array of integrated PN junctions, SCRs, or other Silicon protection structures packaged in a multi-pin structure. The SPA can be used as a integrated solution for ESD, lightning, and EFT protection for telecommunications, general electricronics, and digital consumer markets where multiple protection opportunities exist. For example, it can be used for HDMI, USB, and Ethernet port ESD protection.

8. Comparison of Diode Technologies
Littelfuse
Diode Class
Reverse Breakdown Voltage (VBR, VZ)
Capacitance (CJ)
Remarks
Conventional Diode, Rectifier
800 – 1500V
Very High
AC to DC power conversion
Zener Diode
Up to 100V
Medium to High
DC power regulation
Silicon Avalance Diode (SAD), Transient Voltage Suppressor (TVS)
Up to 600V
Medium
Lightning surge and voltage transient protection
Diode Array
Up to 50V
Low (<50pF)
ESD protection of high-frequency data circuits

9. Device Structure Comparison
Zener/TVS
Schottky
SPA

10. IV Curve and Capacitance Comparison
Current P N
Metal
Capacitance
Bias Voltage PN Junction
0.5V
Bias Voltage Schottky Junction
0.3V + -

11. Device Application Example
A Zener diode is used in this circuit to regulate the voltage of the current supply provided by V+ to the desired Vref voltage required by this IC circuit. The small size (typically DO-35, SOT-23, or smaller) and low cost of the Zener (compared to other techniques, such as a linear regulator or reference chip) make it ideal in this type of application. This solution would not work in an application with a very high V+ (forcing the device to dissipate more than 1 few watts).
Application of Zener as Voltage Regulator

12. Device Application Example
A pair of Schottky diodes are used in this circuit to terminate the Vin line, typicaly a high-speed data line (USB, HDMI, PCI, etc.). The fast speed and low current draw make it ideal for active termination in these applications. Additionally, this solution provides a degree of resistance to ESD events that passive termination does not.
Application of Schottky Network Termination

13. Device Application Example
D.C. Supply Protection
D.C. Line Protection
TVS Diodes are used in a variety of general electronics/white goods circuits to provide protection from transients, regenerative voltages (“back-EMF”), and other spurious events that may damage the circuit or surrounding devices. The wide array of package sizes, high power/current handling (hundreds of watts), and low cost make this device very versatile in many applications. For very high transient voltages or currents (such as lightning) a more specialized device such as a SIDACtor or MOV would be desireable for maximum protection & reliability.
A.C. Supply Protection
EMI Limiting
Single Line
Relay and Contactor Transient Limiting

14. Device Application Example
An SPA is used in circuits requiring multiple-line protection of data circuits from ESD and other transients that require ultra-fast (pico-second) response times and 30kV surge capability in ultra-small packages. They are also ideal for high-speed data applications such as USB and HDMI that require ultra-low (pico-farad) capacitance. The high-density packaging make it very easy to integrate into the precious board space of handheld devices.
Protected
circuit
SP0503BAHT
Application of SCR Type Array
Application of Avalanche Type Array