1. Swivel Light User Instructions Rotate cam counter clock wise to open battery compartment Spare battery can be installed in secondary chamber tip Down(power will only be pulled from battery installed tip up) Locked / Center Position Three functional switches Unlocked mode / Right Position (Visible Light) IR mode / Left Position (Only functional light) Light is fully functional with 1 AA battery (Either chamber can be used) This will allow for maximum run time and light out-put Run time and Light out-put is half the maximum run time and light out-put Insert 2AA Batteries Tip end first Battery Compartment and Installation

2. Swivel Light User Instructions White— Tail Switch Center Light Four visible colored lights (Unlocked mode) / One IR light(night vision optic visible) Green – Right Button Lower Right Light Red – Center Button Upper Left Light Blue -- Left Button Upper Right Light IR-- Left Position Lower Left Light Colored Lights Press 1X -- Low Press 2X -- Medium Press 3X -- High Three modes of operation (if light has been on for more than three seconds, next press will extinguish the light) White Light Press 1X -- Low Press 2X -- Medium Press 3X -- High

3. Swivel Light User Instructions Moving the locking bar to the locked position while in operation with disable all light functions. Move lever to the left Marked IR position automatically engages the IR light (ONE level of brightness) IR mode (night vision optic visible) Depressing the tail switch while in IR mode enables the IR flash. Locked Unlocked mode Quick Extinguishing Function Two functional modes -- Constant on OR IR Flash Constant onFlash mode Depressing the tail switch while on IR flash will return the light to constant on Swivel Head Rotates 130 degrees – Clip attaches to OTV / FLC Depress Side button to rotate and lock into place at intervals of 90 and 180 Degrees 130 Deg. Hook and Tab design to secure light