1. Part 2 - Height

2. - an instrument for measuring heights (of trees)

3.  Total height = height (or stem length) from ground line to top of terminal bud.  Merchantable height = stem length (or height) from assumed stump height to an arbitrary, fixed upper-stem diameter (ib or ob)

4.  Degree – reads angle from horizontal for trigonometric calculations  Percentage – reads directly in feet of height at 100 feet distance (rise/run) (45 degrees equals 100 percent slope)  Topographic – reads directly in feet of height at 66 feet (1 chain or 20 meters) away This is where your pacing or hipchain really comes in handy

5. Trigonometry of right triangles a = b(tan A)

7. Measuring Standing Tree Height Percentage Scale Percent slope = (rise / run) x 100 If distance from tree (D), or "run" is 100 feet, The reading from horizontal to Stump height (A) is 5 feet and tree height above the horizontal plane (B) or "rise" is 80 feet Total Tree height equals A + B = 85 feet

8.  H = (HT - HB)*(HD/BD)  HT = Height to top (BA)  HB = Height to Base (BC) Reading will be negative (unless tree above you)  HD = Horizontal Distance From person to tree  BD = Base Distance 66 (for topographic scale) Or 100 (for percent scale) If you are at scale distance, This factor (HD/BD) equals 1 and can be ignored

11.  Desired horizontal distance to the tree = 100 feet  Slope to the tree = 32% (slope correction needed)  Slope correction factor = 1.05  Taped distance to the tree = 100 feet * 1.05 = 105 feet  The measuring instrument is moved to a taped distance of 105 feet  Angle to tree base = 4%; Angle to tree top = 76%  Tree height = 76 feet - 4 feet = 72 feet

12. Measuring Tools

16. Line of site limitations, expensive

21. Degree and Topographic Scales

22. Degree and Percent Scale

26. Left scale in percent at 100 feet. What is the tree height?

27. Compensates for angle

28. Not Limited by Line of Sight like Laser or Optical

31.  Show General Formula Slide  Show iTunesU video  Show iHypsometer App  Questions so far?

32. Problem Trees

33. Measure perpendicular to the lean, angling your hypsometer (reads normally)

34. Can use Pythagorean Theorem to solve

35. You measure B normally (not full tree height) To get true bole length (A), you need angle C also Then A = B/cos C

38.  Measure height of the stub  Measure length of the piece on the ground (trigonometry may be needed)  Add the two measurements to obtain total height