1. Updated E- Series Electric Proportioners

2. Markets Served Reactor E-20/E-30 –Roofing –Residential Insulation –In-plant OEM –Rim & Band Joists Reactor E-XP1/E-XP2 –Waterproofing –Tank coatings –Potable water –Wastewater treatment –Line striping –Manhole & sewer linings –In-plant OEM

3. Optional Data Reporting Increases knowledge of processed material NEW! – Modular Heater Electronics Increase performance and reliability Energy efficient DC motor Quick Knockdown Fluid Sections ® E-series Key Features Reactor ® E-series Key Features NEW! – Circulation Valves Redesigned for isocyanate materials NEW! Hybrid Heater Design Utilizes direct and mass heating for increased  T Digital User Controls

4. ® Reactor ® E-20/E-30 for Foam SpecificationReactor ® E-20Reactor ® E-30 Output @ 1,000 psi16 lbs/min (7.3 kg/min)24 lbs/min (10.9 kg/min) Maximum Fluid Pressure 2,000 psi (13.8 MPa) Heater Wattage6 kW10.2 and 15.3 kW Max. Hose Length210 ft (64 m)310 ft (95 m) Power RequirementRefer to Sales Literature 300615 Dimensions (H x W x D) 46 in x 31 in x 32 in (117 cm x 79 cm x 81 cm) Preliminary Weight340 lbs (154 kg)400 lbs (181 kg)

5. ® Reactor ® E-XP1/E-XP2 for Coating SpecificationReactor ® E-XP1Reactor ® E-XP2 Output @ 1,750 psi.9 gpm (3.4 l/min)1.8 gpm (6.8 l/min) Maximum Fluid Pressure 2,500 psi (17.2 MPa)3,500 psi (24.0 MPa) Heater Wattage10.2 kW15.3 kW Max. Hose Length210 ft (64 m)310 ft (95 m) Power RequirementRefer to Sales Literature 300615 Dimensions (H x W x D) 46 in x 31 in x 32 in (117 cm x 79 cm x 81 cm) Preliminary Weight342 lbs (155 kg)438 lbs (199 kg)

6. Reactor ® System Components  Select a Reactor  Select Heated Hose  Select Heated Whip Hose  Select a Fusion Gun  Select Supply Processing Components Supply Pump Agitator

7. REACTOR ® E- series Sinusoidal motion smoothes pump changeover found in traditional vertical pumping systems

8. Proportioning Pump Fill Stroke Discharge Stroke Low Pressure High Pressure

9. Proportioning Pump Linkage

10. Iso Pump Lube System Minimizes Iso build-up on pump shaft

11. Can be mounted up to 300 ft. from Reactor® Temperature ControlsPressure/Motor Control Common Error Codes Stop Digital User Controls

12. Temperature Controls

13. Pressure/Motor Controls

14. System diagnostics with error codes Automatic system shutdown when user defined pressure imbalance is detected Data Reporting Kit (optional) –Reports spray application data Digital User Controls

15. Hybrid Heater Combines high mass and direct contact designs for increased Heater efficiency Less time required to reach spray temperatures Increased efficiency in colder ambient temperature climates Direct Contact High Mass Hybrid

16. Communication Board Iso, Resin and Hose Heat Boards LED Lights – indicate system status NEW – NEW – Electronic Controls New electronics increases control and accuracy New electronics design –Increased reliability –Reduced downtime Heater Board divided into four components –1 Communication Board –3 identical Heat Boards Control Iso, Resin and Hose Heating zones –Each Heat Board is interchangeable with the other

17. NEW – NEW – Circulation Valves Specifically designed for use with Isocyanate materials –Increased product performance and reliability Increased response when balancing material pressures Color coded for easy identification –Red valve for Isocyanate or “A” materials –Blue valve for Resin or “B” materials Grease fitting lubricates seals to prevent Iso crystallization Simplified design incorporates seal into valve body

18. Thank you!