1. F AST T RACK REMOTE SWITCH WIRING SET UP FOR THE LIGHT BoardPlug Power strips relay Wiring Harness

2. F AST T RACK REMOTE SWITCH WIRING SET UP FOR THE LIGHT H ARNESS IS PLUGGED IN AND SECURE BoardPlug Wiring Harness

3. F AST T RACK REMOTE SWITCH WIRING SET UP FOR THE LIGHT I NSURE CONTACTS ARE CLEAN SODER IS NOT BROKEN Power strips relay Wiring Harness

4. F AST T RACK REMOTE SWITCH WIRING SET UP FOR THE LIGHT I NSURE SOLDER HAS NOT SEPARATED OR WIRE IS BROKEN ON THE LED I NSURE CONTACTS ARE CLEAN LED Power strips

5. F AST T RACK REMOTE SWITCH WIRING SET UP FOR THE LIGHT I NSURE SOLDER HAS NOT SEPARATED OR WIRE IS BROKEN ON THE LED I NSURE CONTACTS ARE CLEAN LED Power strips

6. F AST T RACK REMOTE SWITCH CONTROLLER LIGHTS DO NOT WORK ONLY FIX I CAN SEE IS EITHER REPLACE THE BOARD OR PURCHASE A NEW CONTROLLER AFTER INSURING THE WIRES ARE INSTALLED CORRECTLY. I F THIS IS NOT WORKING OUT OF THE BOX RETURN THE SWITCH TO THE DEALER Board LEDs relay Wiring Harness

7. F AST T RACK REMOTE SWITCH CONTROLLER LIGHTS DO NOT WORK ONLY FIX I CAN SEE IS EITHER REPLACE WITH SEWING NEEDLE CUT TO LENGTH. Pin

8. F AST T RACK REMOTE SWITCH Pin hole

9. F AST T RACK REMOTE SWITCH Pin hole

10. F AST T RACK REMOTE SWITCH T HIS UNIT CAN BE INSTALLED ON EITHER SIDE OF THE SWITCH AS NOTED IN THE INSTRUCTIONS. I T IS IMPORTANT TO MAKE SURE THE SCREWS ARE TIGHT AS THEY INSURE PROPER CONTACT WITH THE COOPER POWER STRIPS IF THE LIGHT IS STILL NOT WORKING RETURN THE SWITCH TO THE DEALER Light assembly