1. KX-HGT100 SIP-Phone

2. KX-HGT100 Configuration (1) User name: KX-HGT100 Password: kx-hgt100 1.Connect the HGT100 to the LAN via a suitable switch port 2.Power on the unit (using PoE or the optional AC Adaptor) 3.Check the LCD Display shows “Not configured Web Setting” 4. Using your Browser (Internet Explorer etc), access http://192.168.0.241/ Not Configured Web Setting

3. KX-HGT100 Configuration (2) Unit has no Profile set. Registration is not possible Unit Status:

4. KX-HGT100 Configuration (3) STATIC IP is set by default Default IP: 192.168.0.241 Default Subnet Mask 255.255.255.0 Network Status:

5. KX-HGT100 Configuration (4) LAN Connection: STATIC IP or DHCP Mode can be selected. (Static IP is Default = X ) NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the allocated IP address before continuing to configure.

6. KX-HGT100 Configuration (5) Enter IP Address etc of HGT100 here DNS Server Address can be added here (not required for TDE/NCP) After clicking ‘Save’, please power off/on the HGT-100

7. KX-HGT100 Configuration (6) NB: When using DHCP, ensure that the PC connected to the PC-Port is on the same network segment as the HGT-100, otherwise Internet access from the PC will not be possible. The allocated IP address can be checked by pressing the [i+] key on the HGT-100. To re-connect with a browser (after enabling DHCP), enter the allocated IP address) i.e. Allocated IP address 10.66.55.44 URL:http://10.66.55.44/ After clicking ‘Save’, power off/on the HGT-100.

8. KX-HGT100 Configuration (7) Username and Password: Modifies the HTTP Login User name and Password from default If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)

9. KX-HGT100 Configuration (8) Basic Settings: Refer to next slide for language parameters; SIP Extension details and password (Telephone Number and SIP ID can match) SIP Proxy, Registrar and Domain information. For NCP Extension, enter the IP address of the NCP for all settings.

10. KX-HGT100 Configuration (9) Basic Settings: (Example) (Stand-Alone SIP Telephone configuration with Gamma SIP Account) SIP Number, Account and password. SIP Proxy, Registrar and Domain (IP or DNS).

11. KX-HGT100 Configuration (11) Advanced Settings: One Time Caller Code either Permits or Denies CLIP sending on a per call basis, depending on the “My Caller ID” setting of the HGT100. RTP Port Range (Voice Traffic) Codec Priority: PCMA/U = G711A/U G726-32 (N/A for TDA/NCP) G729A DTMF Type: Inband/Outband(RFC2833) SIP UDP Control port Diffserv(ToS) field settings

12. KX-HGT100 Configuration (14) Configuration File: Basic Configurations can be backed-up and/or loaded via this screen. This allows a dealer to create a profile template and then modify only a small number of parameters (Number/Password etc)

13. KX-HGT100 Configuration (15) Upgrade Firmware: Firmware updates can be managed easily from this page. Power off/on the unit to complete the upgrade.

14. KX-HGT100 Configuration (16) Unit Maintenance: Lan/PC Port. Speed/Duplex Settings; Auto Negotiate 100Mbps/Full Duplex 100Mbps/Half Duplex 10Mbps/Full Duplex 10Mbps/Half Duplex Auto Sense is supported.

15. ‘PROGRAM’ KEY LCD DISPLAY ‘NAVI’ KEY ‘INFORMATION’ KEY ‘MUTE’ KEY KX-HGT100 User Setting (1) ‘OK’ KEY AUTOHOLDMessageTransfer ‘SP-Phone ‘Key SP-Phone, Hold and Message Keys have LED. ‘REDIAL’ KEY

16. Save Speed Dial? [OK]=YES KX-HGT100 User Setting (2) Saved in No. 1 Select OK PROGRAM Enter No. 1 No. 1 [OK]=SET 0123456789 Speed dial 0 ~ 9 1 How to access :- ‘OFF-HOOK’ Keys used: 1. AUTO

17. Set Date + Time [OK]=YES KX-HGT100 User Setting (3) Enter Year 2008 [OK] Enter Month/Day 05/07 [OK] Enter Time 17:30 [OK] ▲▼= AM/PM/24H 17:30PM [OK] My Caller ID (Show) [OK]=YES OK Select Show/Hide OK CLIR (Show/Hide) 2. 3.

18. KX-HGT100 User Setting (4) LCD contrast ? [OK]=YES 4. - ██████ + [OK]=YES Select 4 STEPS Ringer Tone ? Ring 1 [OK]=YES 5. Ringer Tone ? Ring 2 [OK]=YES Select 3 STYLES Ringer Volume ? Ring 1 [OK]=YES 6. Ringer Volume [OK] OFF - █████ + Select 4 Position + ‘OFF’ ‘OFF’ = SP-Phone LED Flashes

19. KX-HGT100 User Setting (5) 7. Set Hold Music ? (#01) [OK]=YES Select OK #11 Settings (Inc ‘OFF’) 8. KeyTone Volume ? [OK]=YES Keytone Volume OFF - ███ + [OK] Select 3 Settings (Inc ‘OFF’) Time AM/PM 24H (AM) [OK]=YES 9. OK Select AM/PM/24H

20. KX-HGT100 User Setting (6) 10. Change Language ? English [OK] OK Select Refer to Slide #14 for supported languages Set Network ? (STATIC) [OK]=YES 11. OK Select STATIC IP Or DHCP IP Address [OK] 192.168.010.003 Subnet Mask [OK] 255.255.255.0 Default GW [OK] 192.168.000.001

21. KX-HGT100 User Setting (7) Select IP Address 192.168.010.003 Subnet Mask 255.255.255.0 Default Gateway 192.168.000.001 INFORMATION Own number 01234 1 Status Normal 2 Network STATIC 3 6 5 4

22. KX-HGT100 ‘Special’ setting (1) ‘Special’ Settings: Factory Default: To return the unit to it’s factory default settings, press [Program] + [OK] + [Mute] and power-on the unit. If successful, “Not Configured Web Setting” will be displayed in the LCD. HTTP Port open: To re-open the HTTP Port after initial setting or Idle time-out (default 30min) [OK] + [Mute] and power-on the unit. Firmware Roll-back: To rollback the firmware to the previously installed version [Program] + [Mute] and power-on the unit.