1. Technical Theater Terms, Movement, Safety, Practices

2. PROSCENIUM - the arch that separates the stage from the auditorium

3. STAGE WINGS: the spaces on either side of the stage

4. STAGE DIRECTIONS:

5. CURTAINS: GRAND DRAPE:

6. TRAVELLER: In PAC - located Center Stage and Upstage

7. TEASER, TORMENTOR, LEG, BORDER

8. APRON: PAC apron is 10’ deep

9. Continental Seating:

10. American Seating:

11. CYCLORAMA - a drop (sky drop) that provides the illusion of open sky. Hung far upstage.

12. NOTICE: Cross-grain direction (perpendicular to joint) on keys and corners to improve strength. Same applies to straps on cornerbraces

13. For a 4’ x 12’ Flat: Rails = 4’ Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”… SO… ?

14. For a 4’ x 12’ Flat: Rail = 4’ Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”… SO… 11’ 5” NOTICE: keys, corners, and straps are INSET the width of the stock (3/4”) to allow butt-up NOTICE: the two cornerbraces are on the same side - never opposite sides

15. Cornerblocks and keystones are secured using an 11 nail/screw pattern for cornerblocks, and a seven to 10 nail/screw pattern depending on fastener and usage.

16. TOOL QUIZ: WHAT IS IT CALLED?

17. TOOL QUIZ: WHAT IS IT CALLED? TAPE RULE OR TAPE MEASURE

18. TOOL QUIZ: WHAT IS IT CALLED?

19. TOOL QUIZ: WHAT IS IT CALLED? PUTTY KNIFE

20. TOOL QUIZ: WHAT IS IT CALLED?

21. TOOL QUIZ: WHAT IS IT CALLED? BALL PEIN HAMMER (pound metal, cut gaskets and seal rivets)

22. TOOL QUIZ: WHAT IS IT CALLED?

23. TOOL QUIZ: WHAT IS IT CALLED? WOOD CHISEL

24. TOOL QUIZ: WHAT IS IT CALLED?

25. TOOL QUIZ: WHAT IS IT CALLED? CLAW HAMMER

26. TOOL QUIZ: WHAT IS IT CALLED?

27. TOOL QUIZ: WHAT IS IT CALLED? NAIL SET

28. TOOL QUIZ: WHAT IS IT CALLED?

29. TOOL QUIZ: WHAT IS IT CALLED? PRY BAR

30. TOOL QUIZ: WHAT IS IT CALLED?

31. TOOL QUIZ: WHAT IS IT CALLED? WRECKING BAR

32. TOOL QUIZ: WHAT IS IT CALLED?

33. TOOL QUIZ: WHAT IS IT CALLED? SPEED SQUARE OR QUICK SQUARE

34. TOOL QUIZ: WHAT IS IT CALLED?

35. TOOL QUIZ: WHAT IS IT CALLED? CARPENTERS SQUARE

36. TOOL QUIZ: WHAT IS IT CALLED?

37. TOOL QUIZ: WHAT IS IT CALLED? CHALKLINE

38. TOOL QUIZ: WHAT IS IT CALLED?

39. TOOL QUIZ: WHAT IS IT CALLED? I-BEAM LEVEL

40. TOOL QUIZ: WHAT IS IT CALLED?

41. TOOL QUIZ: WHAT IS IT CALLED? TORPEDO LEVEL

42. TOOL QUIZ: WHAT IS IT CALLED?

43. TOOL QUIZ: WHAT IS IT CALLED? SPRING CLAMP

44. TOOL QUIZ: WHAT IS IT CALLED?

45. TOOL QUIZ: WHAT IS IT CALLED? BAR CLAMP

46. TOOL QUIZ: WHAT IS IT CALLED?

47. TOOL QUIZ: WHAT IS IT CALLED? C- CLAMP

48. TOOL QUIZ: WHAT IS IT CALLED?

49. TOOL QUIZ: WHAT IS IT CALLED? ADJUSTABLE WRENCH OR CRESCENT WRENCH

50. TOOL QUIZ: WHAT IS IT CALLED?

51. TOOL QUIZ: WHAT IS IT CALLED? GROOVE JOINT PLIERS OR CHANNEL LOCKS

52. TOOL QUIZ: WHAT IS IT CALLED?

53. TOOL QUIZ: WHAT IS IT CALLED? NEEDLE NOSE PLIERS OR LONG NOSE PLIERS