1. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd SMMT Type Approval Workshop Wednesday 25 April 2012 CV Show, NEC, Birmingham

2. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd Welcome address Tony Hopkins. Technical Manager, SMMT

3. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 3 Introduction to the content of the workshop Automotive legislation is continually moving and changing. The following is to try and give you and idea of how to approve a particular type of vehicle (N3) as part of a multi-stage build process. The tools to assist you.

4. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 4 Agenda TimeSubjectSpeaker 09:45 – 10:00 Registration - Commercial Vehicle Workshop refreshments 10:00 – 10:05 WelcomeTony Hopkins, Technical Manager, SMMT 10:05 – 10:30Explanation of 2007/46 EC Article 6 Procedures for the EC type- approval of vehicles. Step by step, single step and mixed type- approval. Option available using the Vehicle information folders in 2007/46/EC Annex 1 or Annex III part 11 Mike Protheroe, Vehicle Certification Agency (VCA). 10:30 – 10:50SENTA OverviewTony Hopkins, Technical Manager, SMMT 10:50 – 11:15Worked example of an ECWVTA for a Category N3 HCVMike Protheroe, Vehicle Certification Agency (VCA). 11:15 – 12:00Questions

5. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 5 The current situation To register a Commercial vehicle of Categories N1, 2 & 3 – National Type Approval Covers 7 areas of the vehicle – Brakes Emissions Noise Smoke Front underrun (if applicable) Tyres Speed limiter (if applicable)

6. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 6 Vehicle categories Category N1: Vehicles designed and constructed for the carriage of goods and having a maximum mass not exceeding 3,5 tonnes. Category N2: Vehicles designed and constructed for the carriage of goods and having a maximum mass exceeding 3,5 tonnes but not exceeding 12 tonnes. Category N3: Vehicles designed and constructed for the carriage of goods and having a maximum mass exceeding 12 tonnes.

7. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 7 So what's changing? For all categories of Commercial Vehicle – European Community Whole Vehicle Type Approval EC Directive 2007/46/EC

8. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 8 2007/46/EC 342 Pages 21 Annex’s Covers all vehicle categories and types Anything up to 60+ separate directives to comply with

9. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 9

10. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 10 Type approval routes European Community Whole Vehicle type Approval (ECWVTA). Full approval to register unlimited numbers of a type of vehicle within the EU National Small series Type Approval (NSSTA). Approval to register a limited number of a type of vehicle within the member state issuing the approval Individual Vehicle Approval (IVA). Approval of a single type of vehicle. Administered by VOSA.

11. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 11 Conformity of production (COP) As part of the approval process for ECWVTA and NSSTA, you will require a COP process. ECWVTA – Formal process NSSTA – An ‘approved’ process Both ECWVTA & NSSTA will require control plans. Further information can be obtained from the Vehicle Certification Agency (VCA). IVA - No COP required

12. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 12 Directives and regulations on motor vehicles, their trailers, systems and components Commission Decision of 14 July 2011 correcting Directive 2010/19/EU as regards the amendment of the Annexes to Directive 2007/46/ECCommission Decision of 14 July 2011 Commission Regulation (EU) No 678/2011 of 14 July 2011 replacing Annex II and amending Annexes IV, IX and XI to Directive 2007/46/EC of the European Parliament and of the Council (Framework Directive)Commission Regulation (EU) No 678/2011 of 14 July 2011 Commission Regulation (EU) No 566/2011 of 8 June 2011 amending Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards access to vehicle repair and maintenance informationCommission Regulation (EU) No 566/2011 of 8 June 2011 Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the CouncilCommission Regulation (EU) No 582/2011 of 25 May 2011 Commission Regulation (EU) No 183/2011 of 22 February 2011 amending Annexes IV and VI to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers and of systems, components and separate technical units intended for such vehicles (Framework Directive)Commission Regulation (EU) No 183/2011 of 22 February 2011

13. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 13 Items to consider for the future General Safety Regulation (GSR) including AEBS Repeals 50 directives and combines requirements into 1 regulation Reduces need for testing and approval to EEC requirements as UN ECE Regulations Approvals accepted where available Start to be phased in from 1 st November 2012

14. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 14 Masses and Dimensions TCMV Sub-Group on European Community Small Series Type Approval (ECSSTA) M1 and N1 European Small Series Approval

15. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 15 AEBS. Published in the OJ on the 16 April 2012 as 347/2012 Other items discussed at the TCMV of 16 April 2012 included: Masses and Dimensions Amendments to Annex IV and XII (2007/46)

16. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 16 Nationally: Revisions have been published to the VOSA IVA Manuals for N2/3 and M2/3 Brake test requirements due to be published relating to IVA testing of trailers

17. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 17 The Directive 2007/46/EC became law on the 29 April 2009. The key dates from today are: New types of vehicles 29 October 2012 Existing types of vehicles (Registrations) 29 April 2012 29 April 201329 October 2014 29 October 2012 29 October 2013 20122013 2014 Completed vehicles of Category N 2, N 3. Special purpose vehicles of category N 1, N 2, N 3, M 2, M 3, O 1, O 2, O 3, O 4 M 1 WAV’s, ambulances and motor homes Incomplete and completed vehicles of categories N 2, N 3, O 1, O 2, O 3, O 4 Completed vehicles of category N 1 Completed vehicles of category, O 1, O 2, O 3, O 4 Special purpose vehicles of category N 1, N 2, N 3, M 2, M 3, O 1, O 2, O 3, O 4 Completed vehicles of category N 2, N 3

18. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 18 Summary Automotive legislation is continually moving and changing. What has been indicated here has been derived from the SMMT and Members discussions and consultations at the UK, EC and Globally through the UNECE. The legislation is usually written to cover all categories of vehicles. It is one of the roles of the SMMT to filter out only those parts that are applicable to the vehicles that you manufacture. This is especially true of the SENTA guide which I will speak about further later.

19. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd Mike Protheroe, Standards and Legislation Manager VCA

20. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 20 SENTA SMMT European and National Type Approval guide

21. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 21 SENTA - SMMT European and National Type Approval guide A step-by-step web-based programme to guide vehicle manufacturers, bodybuilders and suppliers through the complicated European Community Whole Vehicle Type Approval system. It also allows for national approval schemes for low volume manufacturers. For a new approval application, SENTA will ease the lengthy process. SENTA details what a manufacturer must do from the original design idea, through the development and construction stages to completion of the approval process.

22. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 22 SENTA - SMMT European and National Type Approval guide The guide is split into three parts. Registered users will be guided through the ECWVTA process from start to finish. This will be based on their specific requirements and supported by:

23. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 23 SENTA - SMMT European and National Type Approval guide The guide simplifies the approval process for those dealing with multi-stage builds by requesting specific information. Help information and worked examples are available for each section of the guide.

24. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 24

25. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 25 First Page

26. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 26 Section 1 – Start of page Special purpose vehicle category added

27. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 27 Section 1 – Page continuation

28. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 28 Section 1 – End of page

29. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 29 Section 2 – Start of page

30. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 30 Section 1 flag increased in size for clarity - Application for a Body Builder or Converter If you are a Body Builder or Converter, please only complete Section 1 and 2 and then go to Section 9. Download and save a copy of the completed Annex I or Annex III Document. Complete the Appendix I - Multi-Stage Build base vehicle summary found at the end of the document. This can be used as part of your Approval application. Dependant on the data listed, you may need to return to Sections 3 to 8 to enter any relevant data there, if necessary.

31. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 31 103950 Appendix 1 – Multi Stage build vehicle summary Stage 1: Make or Trade name of manufacturer: e.g SENTA Trucks Model or Commercial name: e.g Atago Type: AT001 ECWVTA Number: e#*2007/46*####*## of the incomplete/complete vehicle Stage 2: Subjects approved in second stage for the completed vehicle Lateral Protection – e11*?? Rear underrun device - e11*?? Rear registration plate space - e11*?? Lighting Installation - e11*?? Spray Suppression – e11*?? Additional subjects approved: Statutory Plates - e11*?? Masses and dimensions - e11*?? See Section 1 flag note

32. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 32 Sections 3 to 8 Further vehicle information where applicable

33. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 33

34. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 34 Start of page – note: data automatically entered from input to previous sections COMPLETE LIST OF INFORMATION FOR THE PURPOSE OF VEHICLE EC TYPE-APPROVAL OF VEHICLES (a) (For explanatory notes, please see the reference documents in this section) All information documents in this directive and in separate Directives or Regulations shall consist only of extracts from, and adhere to the item numbering system of, this total list. The following information shall be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4, or on a folder of A4 format. Photographs, if any, must show sufficient detail. If the systems, components or separate technical units referred to in this Annex have electronic controls, information concerning their performance shall be supplied. 0.General 0.1.Make (trade name of manufacturer): Bloggs 0.2.Type: Bloggs One 0.2.1.Commercial name(s) (if available): N/A 0.3.Means of identification of type, if marked on the vehicle (b): VIN Plate 0.3.1.Location of that marking: Under bonnet 0.4. Category of vehicle (c): N2 0.4.1.Classification(s) according to the dangerous goods which the vehicle is intended to transport: N/A 0.5. Name and address of manufacturer: Bloggs Unit 10 Anywhere 0.8. Address(es) of assembly plant(s): N/A 0.9. Name and address of the manufacturer’s representative (if any): N/A

35. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 35 Section 10 list of reference documents Section 11 General Type Approval Reference documents

36. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 36 Section 11 General Type Approval Reference documents ItemSubjectRegulatory act referenceN2 EC WV TA UNECE Regulation number Series of amendmentsType Approval applicant information document required 1 Sound levels vehicle70/157/EECX5102 2Emissions70/220/EECX 2aEmissions (Euro 5 and 6) light duty vehicles/ access to information 715/2007/ECX (9) 3aFuel tanks/rear protective devices – fuel tanks 70/221/EECX (5) 3402 3bFuel tanks/rear protective devices – vehicle rear underrun 70/221/EECX (5) 3cFuel tanks/rear protective devices – STU rear underrun 70/221/EECX (5) 3dLPG tanksX6701 3eCNG tanksX11000 3fRear protective deviceX5801 4Rear registration plate space70/222/EECX-- 5Steering effort70/311/EECX7901 6Door latches and hinges70/387/EECX1102 7aAudible warning component70/388/EECX2802

37. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 37

38. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 38 INFORMATION DOCUMENT FOR 77/839 TOWING HOOKS APPENDIX 1 INFORMATION DOCUMENT No........ Pursuant to Annex I of Council Directive 70/156/EEC relating to EC Type-Approval of a vehicle with respect to the towing-devices (Directive 77/389/EEC, as last amended by Directive.../...) The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail. 0. General 0.1. Make (trade name of manufacturer): Alba 0.2. Type and general commercial description(s): BB 0.3. Means of identification of type, if marked on the vehicle (b): VIN 0.3.1. Location of that marking: Cab 0.4. Category of vehicle (c): N3 0.5. Name and address of manufacturer: Alba Holm Industrial Estate Worthing BN13 2AB 0.8. Address(es) of assembly plant(s): As above 1. General construction characteristics of the vehicle 1.1. Photographs and/or drawings of a representative vehicle: See Annex 1.1 Start of page – note: data automatically entered from input to previous sections. This will happen to any information document saved

39. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 39 Sections 13 – Type, Variant and Version chart

40. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 40 Sections 14 – Approval list

41. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 41 Section 15 – Certificates of conformity

42. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 42 MODEL B – SIDE 1 ECWVTA COMPLETED VEHICLES EC CERTIFICATE OF CONFORMITY Side 1 The undersigned ………………………………………………………..(Full name and position) hereby certifies that the vehicle: 0.1Make (Trade name of the manufacturer): …………………………………………………. 0.2: Type: …………………………………………………………………………………………………………. Variant(a):………………………………………………………………………………………………….. Version(a) ……………………………………………………………………………………………………….. 0.2.1 Commercial name: ………………………………………………………………………………………… 0.4 Vehicle category: …………………………………………………………………………………………… 0.5: Name and address of the manufacturer: ……………………………………………………… 0.6 Location and method of attachment of the statutory plates: ……………………… Location of the vehicle identification number: ……………………………………….. 0.9 Name and address of the manufacturer’s representative (if any): ………………………………………………………………………………………………………………………… 0.10 Vehicle identification number: …………………………………………..………………………………….. a) has been completed and altered(1) as follows: ………………………………………and b) conforms in all respects to the type described in approval (…type-approval number including extension number) issued on (…date of issue) and c) can be permanently registered in Member States having right/left (b) hand traffic and using metric/imperial(c) units for the speedometer(d) ……………………………………………........................................................ (Place)(Date) (Signature) Attachments: Certificate of conformity delivered at each previous stage. Side 1 of the CoC

43. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 43 Take a Tour guideline information The Tour is a snapshot of what is contained in the SENTA Guide which is written to cover all categories of vehicles and the possible Approval Routes. It gives an indication of how the Guide works by showing parts of the Section pages and how they may be used. The application and compliance data included in the Tour is based on a European Approval for a large Truck built in two stages – ECWVTA N3 MSB

44. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITEDPAGE 44 SENTA information and registration Go to SMMT website, smmt.co.uk, front page and click on the SENTA button in the top right hand corner

45. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd Mike Protheroe, Standards and Legislation Manager VCA

46. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd Q&A session

47. SOCIETY OF MOTOR MANUFACTURERS AND TRADERS LIMITED SMMT, the ‘S’ symbol and the ‘Driving the motor industry’ brandline are trademarks of SMMT Ltd Thank you for attending Society of Motor Manufacturers and Traders Ltd 71 Great Peter Street, London, SW1P 2BN www.smmt.co.uk