Presentation is loading. Please wait.

Presentation is loading. Please wait.

The Surface Analysis Laboratory A Study of the Interfacial Interaction between Methylene Diphenyl Diisocyanate (MDI) and Metals by XPS Sabrina Tardio Department.

Published byAri Fleeman Modified over 10 years ago

Similar presentations

Presentation on theme: "The Surface Analysis Laboratory A Study of the Interfacial Interaction between Methylene Diphenyl Diisocyanate (MDI) and Metals by XPS Sabrina Tardio Department."— Presentation transcript:

1 The Surface Analysis Laboratory A Study of the Interfacial Interaction between Methylene Diphenyl Diisocyanate (MDI) and Metals by XPS Sabrina Tardio Department of Mechanical Engineering Sciences The Surface Analysis Laboratory 2 July 2014

2 The Surface Analysis Laboratory Project Aim MDI Stainless steel (316L) Iron Molybdenum Nickel Chromium Interface interaction In order to understand the adhesion of PU on metal substrates.

3 The Surface Analysis Laboratory Isocyanate Reactivity Stainless steel surface is made of metal oxide, metal hydroxide and adsorbed water. This is our research imperative!

4 The Surface Analysis Laboratory C1s High Resolution Spectra 1 1 1 1 1 2 3 4 Steel (with carbon contam.) Pure MDI Interface: 3 nm of MDI on stainless steel New peak indicate the formation of a M-C bond: Organometallic complex??

5 The Surface Analysis Laboratory C1s N=C=O Region Pure MDI Steel (with carbon contam.) Interface

6 The Surface Analysis Laboratory MDI/Pure Fe: C1s MDI/Fe: «carbidic» peak MDI/Mo and MDI/Ni : no «carbidic» peak but interaction between with nitrogen!!! Interface

7 The Surface Analysis Laboratory Conclusions MDI/Mo and MDI/Ni interfaces M-N interaction New doublets in the metal peaks (see poster!) MDI/Steel and MDI/Fe interfaces: M-C interaction Peak at 283.6 eV Formation of Peak at 289.2 eV

8

Download ppt "The Surface Analysis Laboratory A Study of the Interfacial Interaction between Methylene Diphenyl Diisocyanate (MDI) and Metals by XPS Sabrina Tardio Department."

Similar presentations

SEWG Meeting Mixed Materials 2007 First results from beryllium on carbon Florian Kost Christian Linsmeier.

SEWG Meeting Mixed Materials 2007 First results from beryllium on carbon Florian Kost Christian Linsmeier.
Metals and Alloys. Alloys Two definitions Combination of two or more elements Combination of two or more metallic elements Metallurgical Commercial.

Metals and Alloys. Alloys Two definitions Combination of two or more elements Combination of two or more metallic elements Metallurgical Commercial.
High temperature Oxidation of Si Containing Steel Computational Metallurgy Lab. Graduate Institute of Ferrous Technology Pohang University of Science and.

High temperature Oxidation of Si Containing Steel Computational Metallurgy Lab. Graduate Institute of Ferrous Technology Pohang University of Science and.
ENG 205 CE-ME-MECE-MSE UNIT 12 STEEL. BASIC CONCEPTS STEEL: It is the most widely used material in engineering. It is an alloy of iron and carbon. There.

ENG 205 CE-ME-MECE-MSE UNIT 12 STEEL. BASIC CONCEPTS STEEL: It is the most widely used material in engineering. It is an alloy of iron and carbon. There.
Metals and their Properties Metals have distinctive properties such as: 1. Electrical Conductivity 2. Good Thermal Conductivity 3. Strength 4. Malleability.

Metals and their Properties Metals have distinctive properties such as: 1. Electrical Conductivity 2. Good Thermal Conductivity 3. Strength 4. Malleability.
Surrey.ac.uk/surfaceanalysis Analysis of Sub-Micron Metal Particles By Proximal Excitation of X-rays: Proximal XPS Christopher F. Mallinson Department.

Surrey.ac.uk/surfaceanalysis Analysis of Sub-Micron Metal Particles By Proximal Excitation of X-rays: Proximal XPS Christopher F. Mallinson Department.
TAFE NSW -Technical and Further Education Commission www.highered.tafensw.edu.au ENMAT101A Engineering Materials and Processes Associate Degree of Applied.

TAFE NSW -Technical and Further Education Commission ENMAT101A Engineering Materials and Processes Associate Degree of Applied.
Unit 2 Manufacturing Materials Ch 3-5 R. Thomas Wright.

Unit 2 Manufacturing Materials Ch 3-5 R. Thomas Wright.
Influence of Substrate Surface Orientation on the Structure of Ti Thin Films Grown on Al Single- Crystal Surfaces at Room Temperature Richard J. Smith.

Influence of Substrate Surface Orientation on the Structure of Ti Thin Films Grown on Al Single- Crystal Surfaces at Room Temperature Richard J. Smith.
O AK R IDGE N ATIONAL L ABORATORY U. S. D EPARTMENT OF E NERGY Lara-Curzio et al. IGTI-2004. Page 1 of 45 Screening and Evaluation of Materials for Advanced.

O AK R IDGE N ATIONAL L ABORATORY U. S. D EPARTMENT OF E NERGY Lara-Curzio et al. IGTI Page 1 of 45 Screening and Evaluation of Materials for Advanced.
Stainless Steels Stainless steels are iron base alloys that contain a minimum of approximately 12% Cr, the amount needed to prevent the formation of rust.

Stainless Steels Stainless steels are iron base alloys that contain a minimum of approximately 12% Cr, the amount needed to prevent the formation of rust.
Epitaxial Overlayers vs Alloy Formation at Aluminum- Transition Metal Interfaces Richard J. Smith Physics Department Montana State University Bozeman MT.

Epitaxial Overlayers vs Alloy Formation at Aluminum- Transition Metal Interfaces Richard J. Smith Physics Department Montana State University Bozeman MT.
NWAPS-May 2000 1 Evolution of Ni-Al interface alloy for Ni deposited on Al surfaces at room temperature R. J. Smith and V. Shutthanandan* Physics Department,

NWAPS-May Evolution of Ni-Al interface alloy for Ni deposited on Al surfaces at room temperature R. J. Smith and V. Shutthanandan* Physics Department,
Catalysis and Catalysts - Mechanism of Catalysis Dissociative Chemisorption of H 2 on a Metal 0.2 0.4 0.60.8 distance, nm 2. chemisorption 1. physisorption.

Catalysis and Catalysts - Mechanism of Catalysis Dissociative Chemisorption of H 2 on a Metal distance, nm 2. chemisorption 1. physisorption.
7th Sino-Korean Symp June 2000 1 Evolution of Ni-Al interface alloy for Ni deposited on Al surfaces at room temperature R. J. Smith Physics Department,

7th Sino-Korean Symp June Evolution of Ni-Al interface alloy for Ni deposited on Al surfaces at room temperature R. J. Smith Physics Department,
Metals and Alloys.

Metals and Alloys.
Hierarchy of Iron Alloys. Numbering System Low Carbon Steel.

Hierarchy of Iron Alloys. Numbering System Low Carbon Steel.
Iron. Atomic properties of iron Chemical element with the symbol Fe Atomic number 26 Melting point 1538 °C Boiling point 2862 °C Ferromagnetic Vickers.

Iron. Atomic properties of iron Chemical element with the symbol Fe Atomic number 26 Melting point 1538 °C Boiling point 2862 °C Ferromagnetic Vickers.
Materials Science and Engineering --- MY2100 Chapters 1 and 2 Metals and Metal Structures Key Concepts  Major Engineering Alloy Systems  The Design Process.

Materials Science and Engineering --- MY2100 Chapters 1 and 2 Metals and Metal Structures Key Concepts  Major Engineering Alloy Systems  The Design Process.
The Surface Analysis Laboratory Cutting and Sputtering: Getting to the Buried Interface John F Watts The Surface Analysis Laboratory Department of Mechanical.

The Surface Analysis Laboratory Cutting and Sputtering: Getting to the Buried Interface John F Watts The Surface Analysis Laboratory Department of Mechanical.

Similar presentations

Ads by Google