Presentation is loading. Please wait.

Presentation is loading. Please wait.

High Pressure Plasma with a third electrode James Roberts Physics TSP 2002 Supervised by Dr Kerrie Balla.

Similar presentations


Presentation on theme: "High Pressure Plasma with a third electrode James Roberts Physics TSP 2002 Supervised by Dr Kerrie Balla."— Presentation transcript:

1 High Pressure Plasma with a third electrode James Roberts Physics TSP 2002 Supervised by Dr Kerrie Balla

2 What is a plasma? Collection of electrons, charged ions and neutral atoms and molecules Collection of electrons, charged ions and neutral atoms and molecules Overall plasma is neutral Overall plasma is neutral + + + + + + ++ + - - - - - - - - - - + + + + + + + + + - - - - -- - -- - + - + +

3 How are they made? Charged particles result from the interaction of gas with an applied electric field Charged particles result from the interaction of gas with an applied electric field Typically confined in a reaction chamber at pressures < 1 mbar Typically confined in a reaction chamber at pressures < 1 mbar

4 How are plasmas used? Many uses Many uses Sputtering Sputtering Used in making our electrodes Used in making our electrodes Thin film deposition Thin film deposition Etching Etching

5 Advantages of higher pressure Improved rates in thin film processes Improved rates in thin film processes More ions  faster process More ions  faster process Less expensive apparatus Less expensive apparatus At atmospheric pressure no vacuum equipment needed At atmospheric pressure no vacuum equipment needed 100 mbar could be sustained by an inexpensive pump 100 mbar could be sustained by an inexpensive pump

6 Vacuum system Constant flow 440 sccm balloon gas @ 100 mbar Constant flow 440 sccm balloon gas @ 100 mbar

7 The chamber

8 Conditions 0.1 mm gap microplanar reactor 0.1 mm gap microplanar reactor Al on alumina substrate Al on alumina substrate Constant flow 440 sccm balloon gas @ 100 mbar Constant flow 440 sccm balloon gas @ 100 mbar 320V peak to peak applied by power supply at 1.7 kHz 320V peak to peak applied by power supply at 1.7 kHz

9 The plasma

10 The third electrode Piece of aluminium 38x14x4 mm Piece of aluminium 38x14x4 mm Supported on two feet, 2 microscope slides high Supported on two feet, 2 microscope slides high Negative potential applied from DC supply Negative potential applied from DC supply Voltage and current monitors allow VI characteristics to be measured on a CRO Voltage and current monitors allow VI characteristics to be measured on a CRO Langmuir probe Langmuir probe

11 CRO trace Electron current Ion current 0 0 V applied -24 V self bias Increase applied –ve voltage to 3 rd electrode 0 Ion current No electron current As magnitude of voltage is increased CRO trace takes this form

12 VI curve

13 Graph shows relatively large ion current Graph shows relatively large ion current  Potentially useful for deposition Similar to that of a Langmuir probe, except no maximum ion current Similar to that of a Langmuir probe, except no maximum ion current  As 3 rd electrode dimensions are comparable to the plasma itself

14 Conclusions High pressure plasmas can be generated with a 1.7 kHz RF supply and microplanar reactor High pressure plasmas can be generated with a 1.7 kHz RF supply and microplanar reactor Ion currents in excess of 30 mA are achieved Ion currents in excess of 30 mA are achieved Investigation only at a preliminary stage – there is much room for further study Investigation only at a preliminary stage – there is much room for further study


Download ppt "High Pressure Plasma with a third electrode James Roberts Physics TSP 2002 Supervised by Dr Kerrie Balla."

Similar presentations


Ads by Google