1. Schutzvermerk nach DIN 34 beachten Connection of the PC with the HPG

2. Schutzvermerk nach DIN 34 beachten There are two roads to success

3. Schutzvermerk nach DIN 34 beachten Possible connections to the HPG via TCP/IP Data exchange with TCP/UDP via Ethernet TCP/IP via Ethernet Router TCP/IP via Telephone Router Programming Diagnosis Supervision Visualization remote- {

4. Schutzvermerk nach DIN 34 beachten Point to point connection via ethernet: Settings Crosslink-Cable IP-Address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 excerpt from the Config.ini: 4 Target parameters Network environment

5. Schutzvermerk nach DIN 34 beachten Setting of the HPG‘s IP address Default- Projekt Either this way (By startup project) : Or that way: 1 2 3 Switch off the HPG bevor removing the Compact Flash card! e=10.1.43.207:fffffe00 Subnet maskIP address Or that way: FTP access

6. Schutzvermerk nach DIN 34 beachten Settings

7. Schutzvermerk nach DIN 34 beachten Point-to-point connection via Ethernet: Settings Crosslink-Cable IP address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 Excerpt from Config.ini: 4 Target parameters

8. Schutzvermerk nach DIN 34 beachten Point-to-point connection via Ethernet: Settings Crosslink-Cable IP address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 Excerpt from Config.ini: 4 Target parameters

9. Schutzvermerk nach DIN 34 beachten Point-to-point connection via Ethernet: Settings Crosslink-Cable IP address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 Excerpt from Config.ini: 4 Target parameters

10. Schutzvermerk nach DIN 34 beachten Point-to-point connection via Ethernet: Settings Crosslink-Cable IP address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 Excerpt from Config.ini: 4 Target parameters

11. Schutzvermerk nach DIN 34 beachten Point-to-point connection via Ethernet: Settings Crosslink-Cable IP address Subnet mask Communication parameters 1 3 2 e=10.1.43.207:fffffe00 Excerpt from Config.ini: 4 Target parameters

12. Schutzvermerk nach DIN 34 beachten Online operation