1. Automation and Motion IEC Control Marketing, 12.15.03, 1 Safety Integrated® Topics for today

2. Automation and Motion IEC Control Marketing, 12.15.03, 2 Safety Integrated® SIMIREL: - Relays for every application Overview

3. Automation and Motion IEC Control Marketing, 12.15.03, 3 Safety Integrated® Value proposition for Safety This is a technology that will open the door for TIA Why? #1 Industry Hot topic Safety will get you in the door with customers who havent considered Siemens in the past

4. Automation and Motion IEC Control Marketing, 12.15.03, 4 Safety Integrated® Time Money + Customer will save Value proposition for Safety Connects with Existing PLC Improved Diagnostics Easy Expansion With

5. Automation and Motion IEC Control Marketing, 12.15.03, 5 Safety Integrated® Base Standard is NFPA 79 Where a Category 0 stop is used for the emergency stop function, it shall have only hardwired electromechanical components. In addition, its operation shall not depend on electronic logic (hardware or software) or the transmission of commands over a communications network or link. Relays and solenoids that are mechanically interlocked shall be electrically interlocked. For applications not covered by OSHA, NFPA 79 has been the primary barrier to adopting Electronic Based Safety Systems in the US for Machine Control Many ANSI B11 Standards Reference NFPA 79 NFPA 79-1997 stated:

6. Automation and Motion IEC Control Marketing, 12.15.03, 6 Safety Integrated® Traditional Safety Circuit Interlock Switch E-Stop Interlock Switch E-Stop Safety Relay

7. Automation and Motion IEC Control Marketing, 12.15.03, 7 Safety Integrated® NFPA 79 – 2002: Changes the Landscape New NFPA 79 – 2002 -> now allows the use of Electronic Safety-Related Functions

8. Automation and Motion IEC Control Marketing, 12.15.03, 8 Safety Integrated® NFPA79 Changes for Functional Safety 9.4.3* Control systems incorporating software and firmware based controllers performing safety related-functions shall: (1)In the event of any single failure perform as follows: a Lead to the shutdown of the system in a safe state b Prevent subsequent operation until the failure has been corrected c Prevent unintended startup of equipment upon correction of the failure (2)Provide protection equivalent to that of control systems incorporating hardwired components, and (3)Be designed in conformance with an approved standard that provides requirements for such systems. IEC 61508 provides requirements for the design of control systems incorporating the use of software and firmware based controllers to performing safety-related functions. * Annex A note:

9. Automation and Motion IEC Control Marketing, 12.15.03, 9 Safety Integrated® What is AS-Interface Safety at Work (ASI-SAFE TM )? A communication network based on AS-Interface that…… …… allows the connection of safety related devices such as EMERGENCY STOP, Position Switches, Light Curtains, Laser Scanners, Gate Switches to an intelligent safety relay called a Safety Monitor over a network. Safety Integrated® USA

10. Automation and Motion IEC Control Marketing, 12.15.03, 10 Safety Integrated® TUV Certification SAFETY AT WORK

11. Automation and Motion IEC Control Marketing, 12.15.03, 11 Safety Integrated® SAFETY AT WORK TUV Certification

12. Automation and Motion IEC Control Marketing, 12.15.03, 12 Safety Integrated® New Safety Circuit Using ASI-SAFE E-Stop Interlock Switch Interlock Switch Safety Monitor Zone 1 Zone 2

13. Automation and Motion IEC Control Marketing, 12.15.03, 13 Safety Integrated® Safety cabinet Safety-related relays PLC control technology Compelling advantages Standard I/O DeviceNet

14. Automation and Motion IEC Control Marketing, 12.15.03, 14 Safety Integrated® Safety cabinet Safety-related relays PLC control technology Compelling advantages Standard I/O DeviceNet

15. Automation and Motion IEC Control Marketing, 12.15.03, 15 Safety Integrated® PLC control technology Fieldbus Standard I/O Safety Integrated® USA

16. Automation and Motion IEC Control Marketing, 12.15.03, 16 Safety Integrated® PLC control technology Fieldbus Compelling advantages Standard I/O

17. Automation and Motion IEC Control Marketing, 12.15.03, 17 Safety Integrated® SST-ASI-SLC BW1116 BWU1488 BWU1416 Popular Ways To Link to AS-I and AS-I SAFE SLC 500 DeviceNet to ASI Gateway ControLogix MicroLogix

18. Automation and Motion IEC Control Marketing, 12.15.03, 18 Safety Integrated® ASI Scanner SLC CPU Popular Ways To Link to AS-I and AS-I SAFE Standard and Safe I/O

19. Automation and Motion IEC Control Marketing, 12.15.03, 19 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

20. Automation and Motion IEC Control Marketing, 12.15.03, 20 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

21. Automation and Motion IEC Control Marketing, 12.15.03, 21 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

22. Automation and Motion IEC Control Marketing, 12.15.03, 22 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

23. Automation and Motion IEC Control Marketing, 12.15.03, 23 Safety Integrated® ASI Scanner SLC CPU Popular Ways To Link to AS-I and AS-I SAFE

24. Automation and Motion IEC Control Marketing, 12.15.03, 24 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

25. Automation and Motion IEC Control Marketing, 12.15.03, 25 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

26. Automation and Motion IEC Control Marketing, 12.15.03, 26 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

27. Automation and Motion IEC Control Marketing, 12.15.03, 27 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

28. Automation and Motion IEC Control Marketing, 12.15.03, 28 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

29. Automation and Motion IEC Control Marketing, 12.15.03, 29 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

30. Automation and Motion IEC Control Marketing, 12.15.03, 30 Safety Integrated® Popular Ways To Link to AS-I and AS-I SAFE

31. Automation and Motion IEC Control Marketing, 12.15.03, 31 Safety Integrated® 6GK1415-2AA01 6GK7243-2AX01-0XA0 Popular Ways To Link to AS-I and AS-I SAFE PROFIBUS to ASI Gateway (Link20E) S7-200 ASI Master S7-300 ASI Master 6GK7243-2AX01-0XA0

32. Automation and Motion IEC Control Marketing, 12.15.03, 32 Safety Integrated® CPU Standard I/O I/O Safety Integrated® USA

33. Automation and Motion IEC Control Marketing, 12.15.03, 33 Safety Integrated® CPU Standard I/O I/O AS Interface Master Safety Integrated® USA Safety Monitor E-Stop

34. Automation and Motion IEC Control Marketing, 12.15.03, 34 Safety Integrated® ASI Scanner S7200 CPU Safety Integrated® USA

35. Automation and Motion IEC Control Marketing, 12.15.03, 35 Safety Integrated® Safety Integrated® USA

36. Automation and Motion IEC Control Marketing, 12.15.03, 36 Safety Integrated® Safety Integrated® USA

37. Automation and Motion IEC Control Marketing, 12.15.03, 37 Safety Integrated® Safety Integrated® USA

38. Automation and Motion IEC Control Marketing, 12.15.03, 38 Safety Integrated® Safety Integrated® USA

39. Automation and Motion IEC Control Marketing, 12.15.03, 39 Safety Integrated®

40. Automation and Motion IEC Control Marketing, 12.15.03, 40 Safety Integrated®

41. Automation and Motion IEC Control Marketing, 12.15.03, 41 Safety Integrated® SAFETY AT WORK Safety Monitor Safety I/O Configuring Software Major Components Safety Integrated® USA

42. Automation and Motion IEC Control Marketing, 12.15.03, 42 Safety Integrated® ASIMON Software

43. Automation and Motion IEC Control Marketing, 12.15.03, 43 Safety Integrated® ASIMON Software

44. Automation and Motion IEC Control Marketing, 12.15.03, 44 Safety Integrated® ASIMON Software

45. Automation and Motion IEC Control Marketing, 12.15.03, 45 Safety Integrated® ASI-SAFE Competitors AC002S VAS-2A-K12-U 3RK1105-1BE04-0CA0

46. Automation and Motion IEC Control Marketing, 12.15.03, 46 Safety Integrated® No reduction in safety functionality Compatible with existing PLC components Reduces installation costs Hardware Labor Reduces installation time Ability to utilize existing safety components or integrated safety components Approved for use in United States per NFPA79-2002 Features of ASI-SAFE

47. Automation and Motion IEC Control Marketing, 12.15.03, 47 Safety Integrated® Topics for today

48. Automation and Motion IEC Control Marketing, 12.15.03, 48 Safety Integrated® Topics for today