1. 402/403 XE Basics

2. What is the 402/403 XE series? Value priced actuator for medium payloads (<150 lbs) Targeted for hard disk manufacturing, high tech markets, life sciences, lab automation, and also competes for pneumatic replacements Primary Competitors –NSK –THK –Danaher (aka NB)

3. 402/403 XE Basics Highly integrated linear rail/screw positioner –Two cross sections (HxW) 402XE – 23x50mm (no cover) and 36x57mm (cover) 403XE – 30x60mm (no cover) and 45x80mm (cover) –Extruded and machined steel base 402XE – 75mm to 225 mm stroke 403XE – 60mm to 655 mm stroke Steel body allows for cantilever –Precision rolled ballscrew 402XE – 5mm or 2mm lead 403XE – 5mm or 10mm lead

4. Rigid Steel U-Channel Body Provides structural rigidity for minimal deflection. Flexible Motor Mounting Options Provide a variety of motor drive options including servo and stepper motors Precision Ball Screw Drive Train Provides smooth motion with high accuracy and high mechanical efficiency. Integrated Precision Screw and Guide Bearing Provide a low profile, high accuracy, smooth motion, and robust adjustment free design over the life of the actuator Packaged Adjustable Limit Sensors Provide adjustable stroke lengths, easily connected, and reduced cables to manage in an aesthetically appealing manner. Optional Hard Cover Clear anodized Provides protection from contamination falling into the positioner.

5. 402 /403 XE Series Precision Rolled Ballscrew –5mm, 2mm lead options (402XE) –5mm, 10mm lead options (403XE) 10 um or better repeatability –Accuracy ~ 15 um

6. 402/403 XE Bearing Highly Integrated Linear Bearing –Single Carriage –4 point contact for equal loading in any direction

7. 402/403 XE Optional Hard Cover –Similar to 404XE –Protection from large contaminants –No IP rating

8. 402/403XE Mounting “Down through” style –No Toe Clamps

9. 402/403 XE Motor Options Stepper Motor Options –LV/HV17 –LV/HV23 Servo Motor Options –SM23 –SM16 Prepped for these motors or Included

10. 402/403 XE Limits Home and Limit Sensor Option –Parker Global Sensor –24VDC operation –NPN / PNP –NO / NC options –Packaged into limit switch housing with connector terminal –Same sensor as HD and LP actuators

11. Compared to 404XE 404XE 403XE 402XE 404XE403XE402XE Width95mm60mm50mm Height47.3mm30mm23mm Max Travel700mm655mm220mm Repeatability20-30 micron+/-5 micron Straightness20-30 micron15-25 micron15 micron Load Capacity135/270 lbs425 lbs261 lbs Max Speed1440 mm/s810 mm/s490 mm/sec Leads5, 10, 20mm5, 10mm2, 5mm

12. Compared to 401/402XR 402XR 403XE 402XE 402XR403XE401XR402XE Width57.1mm60mm40.9mm50mm Height57.1mm30mm49.5mm23mm Max Travel600mm655mm300mm220mm Repeat (+/-)12 micron+/-5 micron5-12 micron+/-5 micron Straightness20-30 micron15-25 micron20-25micron15 micron Load220 lbs425 lbs110 lbs261 lbs Max Speed1440 mm/s810 mm/s500 mm/sec490 mm/sec Leads5, 10mm 2, 5mm 401XR

13. 4 travel options 2 Drive styles (2 or 5 mm) Connectorized or Hard wired limits Flexible motor mounts or include the SM16 or HV23 Hard cover and Clean Room options XY assembly for system solutions

14. Same as 402 except: 8 Travel options 5 or 10 mm lead screw SM232 motor option included

15. Sample Application 50 lb load 5 in/s 8” Stroke 15 micron repeatability spec 30 micron accuracy spec Load 10” to the left of the carriage Overhead View 10” 50 lb

16. Size Actuator Using Curves 50 lbs = 222 N 402 = 60000 km life 403 = >100000 km life

17. Size Actuator Using Curves 50 lbs at 10 inches = 60 Nm roll – 402 Too Small

18. Size Actuator Using Curves 403 works, but with short life

19. Size Actuator Using Curves The catalog also has Critical Speed Curves Ball Screw Life Curves Side Loading vs Life

20. Input data into Motion Sizer to size motor Size for a standard motor included with the actuator SM162AQ-NPSN SM232AQ-NPSN HV232-02-10 This helps build an easy part number

21. Finish it off with an 803 or Std Part number

22. Part Number

23. Questions?