1. GCC StellarJet 250UV Demonstration Eric Huang March 14, 2006

2. Introduction Flow Outlook Hardware Controller RIP Printing Service Station Printing Area Work Station

3. Vacuuming Conveyer System

4. Extension Roller Table

5. Media Feed and Take-up Roller ** Work with X motor assembly for media movement

6. Media Bar (Front & Rear) Alignment Bar Foot Pedal (Front & Rear)

7. Rail System ** Work with Y motor assembly for print carriage movement

8. Print Carriage Print Head Module * CMYKLcLm: Xaar XJ500, 360dpi * W: Xaar XJ500, 180 dpi Sub Tank Head Board and Relay Board

9. Print Carriage Auto Media Calibration (AMC) –Work with Z motor

10. UV Lamp Box and Power Supply UV Lamp Controller (Power supply & counter )

11. Service Station

12. +/- Pressure System vs. Ink Supply Positive Pressure Pump Negative Pressure Pump

13. Compressor Control media bar / alignment bar / service station cover and wiper / cap and cover / media roller / UV Lamp Shutter

14. Board Control I/O Board X/Y-axis card,120 DIO card & PCI card (on IPC) Carriage Board Print Engine Board Valve I/O Board

15. IPC

16. LCD Monitor (Firmware Controller)

17. RIP - ColorPRINT Server Pro (with ICC Profile)