Download presentation
Presentation is loading. Please wait.
Published byMuhammad Smock Modified over 10 years ago
1
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 1 DCNNG IO SA CC 22.Mar.06 How to configure DCNNG & Stand Alone Camera Control This presentation is intended to guide the installer step by step through camera control installation. Mr. Peetroons Belgium DCNNG CC
2
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 2 DCNNG IO SA CC 22.Mar.06 How to configure DCNNG & Stand Alone Camera Control DCN-CCUB with direct Camera Control & Virtual Keyboard DCN-CCUB with direct Camera Control & Virtual Keyboard DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
3
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 3 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with direct Camera Control & Virtual Keyboard Requirements: One AutoDome Camera One monitor Virtual keyboard software LTC 5138/00 DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx
4
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 4 DCNNG IO SA CC 22.Mar.06 Step 1 Connecting PC and Monitor to AutoDome Camera RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Make sure that the Dome camera has an address.
5
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 5 DCNNG IO SA CC 22.Mar.06 Step 2 Install virtual keyboard software LTC 5138/00 I & U Instructions AutoDome Camera Temporary Installation PC Temporary Installation PC
6
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 6 DCNNG IO SA CC 22.Mar.06 Step 3 Configure Virtual Keyboard
7
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 7 DCNNG IO SA CC 22.Mar.06 Step 4 Communication Setup
8
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 8 DCNNG IO SA CC 22.Mar.06 Step 5 Make sure you choose the right camera!
9
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 9 DCNNG IO SA CC 22.Mar.06 Step 6
10
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 10 DCNNG IO SA CC 22.Mar.06 Step 7 Quick Commands settings
11
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 11 DCNNG IO SA CC 22.Mar.06 Step 8 Pre-Position Title Set
12
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 12 DCNNG IO SA CC 22.Mar.06 Step 9 Set Pre-Positions
13
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 13 DCNNG IO SA CC 22.Mar.06 Step 10 Pre-Position Shot Name
14
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 14 DCNNG IO SA CC 22.Mar.06 Repeat Repeat Steps 9 &10 to set all Pre-Positions Set the highest Pre-Position as overview
15
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 15 DCNNG IO SA CC 22.Mar.06 Step 11 Check the Pre-Positions To NEXT >>>>>>
16
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 16 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with direct Camera Control & Virtual Keyboard DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
17
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 17 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with direct Camera Control & Autodome Controller Requirements: One AutoDome Camera One monitor Autodome Controller LTC 5136/51 DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx
18
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 18 DCNNG IO SA CC 22.Mar.06 Step 1 Only for Pre setting the Autodome Camera with the Autodome Controller Connect Autodome Controller to data converter LTC 5136/51 Connect Data converter to Aurodome Camera Connect Autodome Camera to Monitor IUI Autodome Temporary Autodome Controller Temporary Autodome Controller Data Converter AutoDome Camera For Installation and User Instructions Autodome Controller
19
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 19 DCNNG IO SA CC 22.Mar.06 Remark If you were not successful setting up the pre-positions please don’t continue with the next steps. First make sure that the pre-positions are set.
20
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 20 DCNNG IO SA CC 22.Mar.06 Step 2 Connect CCUB to PC RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Port 1 Camera Control Protocol Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K
21
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 21 DCNNG IO SA CC 22.Mar.06 Port 1 You have to change the port settings ! Protocol = Camera Control Baudrate= 9.6K Step 3 CCU protocol and Serial Port settings DCN-CCUB Make sure that the ports of the CCU are set correct. S500 Dip switches I & U Instructions
22
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 22 DCNNG IO SA CC 22.Mar.06 Step 4 Install DCNNG Stand Alone Camera Control software LBB4162
23
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 23 DCNNG IO SA CC 22.Mar.06 Step 5 Install Camera Control software LBB4162
24
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 24 DCNNG IO SA CC 22.Mar.06 Step 6 Install Camera Control software LBB4162
25
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 25 DCNNG IO SA CC 22.Mar.06 Step 7 Install Camera Control software LBB4162
26
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 26 DCNNG IO SA CC 22.Mar.06 Step 8 Select the language for operator
27
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 27 DCNNG IO SA CC 22.Mar.06 Step 9 Select no use of Allegiant VideoSwitcher
28
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 28 DCNNG IO SA CC 22.Mar.06 Step 10 Installing DCNNG Stand Alone Camera Control software LBB4162
29
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 29 DCNNG IO SA CC 22.Mar.06 Step 11 Finish installation
30
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 30 DCNNG IO SA CC 22.Mar.06 Step 12 Start DCN Next Generation Camera Install
31
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 31 DCNNG IO SA CC 22.Mar.06 Step 13 Combine seat numbers with camera pre positions LBB4162
32
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 32 DCNNG IO SA CC 22.Mar.06 Step 14 Make sure you choose the right camera!! Camera nr = Camera Address LBB4162
33
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 33 DCNNG IO SA CC 22.Mar.06 Step 15 Insert LBB4162
34
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 34 DCNNG IO SA CC 22.Mar.06 Step 16 Stop Camera Installation 5 LBB4162
35
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 35 DCNNG IO SA CC 22.Mar.06 Step 17 Connect CCUB to AutoDome Camera AutoDome Camera I & U Instructions RS232 Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K Port 1 Camera Control Protocol Baudrate 9.6K
36
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 36 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with direct Camera Control & Autodome Controller DCN-CCUB with Allegiant Video Switcher DCN-CCUB with Allegiant Video Switcher DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
37
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 37 DCNNG IO SA CC 22.Mar.06 DCN-CCUB with Allegiant Video Switcher Requirements: Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s) DCN-CCUB Temporary Installation PC Camera Control Software LBB 4162/xx
38
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 38 DCNNG IO SA CC 22.Mar.06 Step 1 Connecting system hardware BOSCH Temporary Installation PC Temporary Installation PC
39
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 39 DCNNG IO SA CC 22.Mar.06 DCN-CCU Step 2 Connect DCN-CCUB & Allegiant Switcher to Temporary PC RS232 Baudrate 19.2K Camera Control Protocol I & U Instructions Baudrate 19.2K Allegiant Switcher Allegiant Switcher
40
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 40 DCNNG IO SA CC 22.Mar.06 Port 1 You have to change the port settings ! Protocol = Camera Control Baudrate= 19.2K Step 3 CCU protocol and Serial Port settings DCN-CCUB Make sure that the ports of the CCU are set correct. S500 Dip switches I & U Instructions
41
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 41 DCNNG IO SA CC 22.Mar.06 Step 4 Install DCNNG Stand Alone Camera Control software LBB4162
42
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 42 DCNNG IO SA CC 22.Mar.06 Step 5 Installing DCNNG Stand Alone Camera Control software LBB4162
43
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 43 DCNNG IO SA CC 22.Mar.06 Step 6 Installing DCNNG Stand Alone Camera Control software LBB4162
44
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 44 DCNNG IO SA CC 22.Mar.06 Step 7 Installing DCNNG Stand Alone Camera Control software LBB4162
45
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 45 DCNNG IO SA CC 22.Mar.06 Step 8 Select the language for operator
46
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 46 DCNNG IO SA CC 22.Mar.06 Step 9 Select use Allegiant VideoSwitcher
47
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 47 DCNNG IO SA CC 22.Mar.06 Step 10 Installing DCNNG Stand Alone Camera Control software LBB4162
48
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 48 DCNNG IO SA CC 22.Mar.06 Step 11 Finish installation
49
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 49 DCNNG IO SA CC 22.Mar.06 Step 12 Set Pre-Positions using the Video Switcher Keyboard
50
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 50 DCNNG IO SA CC 22.Mar.06 Step 13 Start DCN Next Generation Camera Install
51
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 51 DCNNG IO SA CC 22.Mar.06 Step 14 Combine seat numbers with camera pre positions LBB4162
52
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 52 DCNNG IO SA CC 22.Mar.06 Step 15 Make sure you choose the right camera!! Camera nr = Camera Address LBB4162
53
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 53 DCNNG IO SA CC 22.Mar.06 Step 16 Insert LBB4162
54
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 54 DCNNG IO SA CC 22.Mar.06 Step 17 Stop Camera Installation 5 LBB4162
55
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 55 DCNNG IO SA CC 22.Mar.06 Step 19 Connecting hardware (Remove temporary PC!) BOSCH See next slide Temporary Installation PC Temporary Installation PC
56
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 56 DCNNG IO SA CC 22.Mar.06 Step 19 Connection cable between CCU and Allegiant Switcher I & U Instructions
57
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 57 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCUB with Allegiant Video Switcher DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
58
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 58 DCNNG IO SA CC 22.Mar.06 DCN-CCU with direct Camera & Virtual Keyboard Requirements: One AutoDome Camera One monitor Virtual keyboard software LTC 5138/00 DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx
59
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 59 DCNNG IO SA CC 22.Mar.06 Step 1 Connect PC and Monitor to the Dome Camera RS232 I & U Instructions Temporary Installation PC Temporary Installation PC Make sure that the Dome camera has an address.
60
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 60 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 2 Install virtual keyboard software LTC 5138/00 I & U Instructions Temporary Installation PC Temporary Installation PC
61
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 61 DCNNG IO SA CC 22.Mar.06 Step 3 Configure Virtual Keyboard
62
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 62 DCNNG IO SA CC 22.Mar.06 Step 4 Communication Setup
63
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 63 DCNNG IO SA CC 22.Mar.06 Step 5 Make sure you choose the right camera!!
64
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 64 DCNNG IO SA CC 22.Mar.06 Step 6
65
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 65 DCNNG IO SA CC 22.Mar.06 Step 7 Quick Commands settings
66
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 66 DCNNG IO SA CC 22.Mar.06 Step 8 Pre-Position Title Set
67
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 67 DCNNG IO SA CC 22.Mar.06 Step 9 Set Pre-Positions
68
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 68 DCNNG IO SA CC 22.Mar.06 Step 10
69
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 69 DCNNG IO SA CC 22.Mar.06 Repeat Repeat Step 9 & 10 to set all Pre-Positions Set the highest Pre-Position as overview
70
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 70 DCNNG IO SA CC 22.Mar.06 Step 11 Check the Pre-Positions To NEXT >>>>>>
71
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 71 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with direct Camera & Virtual Keyboard DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
72
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 72 DCNNG IO SA CC 22.Mar.06 DCN-CCU with direct Camera Control & Autodome Controller Requirements: One AutoDome camera Monitor(s) Autodome Controller LTC 5136/51 DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx
73
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 73 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 1 Only for Pre setting the Autodome Camera with the Autodome Controller Connect Autodome Controller to data converter LTC 5136/51 Connect Data converter to Aurodome Camera Connect Autodome Camera to Monitor IUI Autodome Temporary Autodome Controller Temporary Autodome Controller Data Converter For Installation and User Instructions Autodome Controller
74
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 74 DCNNG IO SA CC 22.Mar.06 Remark If you were not successful setting up the pre-positions please don’t continue with the next steps. First make sure that the pre-positions are set.
75
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 75 DCNNG IO SA CC 22.Mar.06 Port 2 Camera Control Protocol Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K Step 2 Connect CCU to PC RS232 I & U Instructions Temporary Installation PC Temporary Installation PC
76
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 76 DCNNG IO SA CC 22.Mar.06 Step 3 CCU protocol and Serial Port settings DCN-CCU Make sure that the ports of the CCU are set correct. Port 1 Protocol = Full Baudrate= 115.2K Port 2 Protocol = Camera Control Baudrate= 9.6K Keep in mind !! You have to change the baudrate of Port 2 to 9.6K !! S500 Dip switches I & U Instructions
77
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 77 DCNNG IO SA CC 22.Mar.06 Step 4 Make sure you connect the RS232 cable to Port 2 of the DCN-CCU.
78
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 78 DCNNG IO SA CC 22.Mar.06 Step 5 Install DCNNG Stand Alone Camera Control software LBB4162
79
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 79 DCNNG IO SA CC 22.Mar.06 Step 6 Install Camera Control software LBB4162
80
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 80 DCNNG IO SA CC 22.Mar.06 Step 7 Install Camera Control software LBB4162
81
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 81 DCNNG IO SA CC 22.Mar.06 Step 8 Install Camera Control software LBB4162
82
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 82 DCNNG IO SA CC 22.Mar.06 Step 9 Select the language for operator
83
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 83 DCNNG IO SA CC 22.Mar.06 Step 10 Select no use of Allegiant VideoSwitcher
84
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 84 DCNNG IO SA CC 22.Mar.06 Step 11 Installing DCNNG Stand Alone Camera Control software LBB4162
85
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 85 DCNNG IO SA CC 22.Mar.06 Step 12 Finish installation
86
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 86 DCNNG IO SA CC 22.Mar.06 Step 13 Start DCN Next Generation Camera Install
87
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 87 DCNNG IO SA CC 22.Mar.06 Step 14 Combine seat numbers with camera pre positions LBB4162
88
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 88 DCNNG IO SA CC 22.Mar.06 Step 15 Make sure you choose the right camera!! Camera nr = Camera Address LBB4162
89
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 89 DCNNG IO SA CC 22.Mar.06 Step 16 Insert LBB4162
90
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 90 DCNNG IO SA CC 22.Mar.06 Step 17 Stop Camera Installation 5 LBB4162
91
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 91 DCNNG IO SA CC 22.Mar.06 AutoDome Camera Step 18 Connect CCU to AutoDome Camera I & U Instructions RS232 Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K Port 2 Camera Control Protocol Baudrate 9.6K
92
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 92 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with direct Camera Control & Autodome Controller DCN-CCU with Allegiant Video Switcher DCN-CCU with Allegiant Video Switcher
93
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 93 DCNNG IO SA CC 22.Mar.06 DCN-CCU with Allegiant Video Switcher Requirements: Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s) DCN-CCU Temporary Installation PC Camera Control Software LBB 4162/xx
94
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 94 DCNNG IO SA CC 22.Mar.06 Step 1 Connecting system hardware BOSCH Temporary Installation PC Temporary Installation PC
95
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 95 DCNNG IO SA CC 22.Mar.06 DCN-CCU Step 2 Connect DCN-CCU & Allegiant Switcher to Temporary PC RS232 Baudrate 19.2K Port 2 Camera Control Protocol I & U Instructions Baudrate 19.2K Allegiant Switcher Allegiant Switcher
96
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 96 DCNNG IO SA CC 22.Mar.06 Step 3 CCU protocol and Serial Port settings DCN-CCU Make sure that the ports of the CCU are set correct. Port 1 Protocol = Full Baudrate= 115.2K Port 2 Protocol = Camera Control Baudrate= 19.2K S500 Dip switches I & U Instructions
97
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 97 DCNNG IO SA CC 22.Mar.06 Step 4 Make sure you connect the RS232 cable to Port 2 of the DCN-CCU.
98
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 98 DCNNG IO SA CC 22.Mar.06 Step 5 Install DCNNG Stand Alone Camera Control software LBB4162
99
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 99 DCNNG IO SA CC 22.Mar.06 Step 6 Installing DCNNG Stand Alone Camera Control software LBB4162
100
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 100 DCNNG IO SA CC 22.Mar.06 Step 7 Installing DCNNG Stand Alone Camera Control software LBB4162
101
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 101 DCNNG IO SA CC 22.Mar.06 Step 8 Installing DCNNG Stand Alone Camera Control software LBB4162
102
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 102 DCNNG IO SA CC 22.Mar.06 Step 9 Select the language for operator
103
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 103 DCNNG IO SA CC 22.Mar.06 Step 10 Select use Allegiant VideoSwitcher
104
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 104 DCNNG IO SA CC 22.Mar.06 Step 11 Installing DCNNG Stand Alone Camera Control software LBB4162
105
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 105 DCNNG IO SA CC 22.Mar.06 Step 12 Finish installation
106
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 106 DCNNG IO SA CC 22.Mar.06 Step 13 Set Pre-Positions using the Video Switcher Keyboard
107
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 107 DCNNG IO SA CC 22.Mar.06 Step 14 Start DCN Next Generation Camera Install
108
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 108 DCNNG IO SA CC 22.Mar.06 Step 15 Combine seat numbers with camera pre positions LBB4162
109
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 109 DCNNG IO SA CC 22.Mar.06 Step 16 Make sure you choose the right camera!! Camera nr = Camera Address LBB4162
110
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 110 DCNNG IO SA CC 22.Mar.06 Step 17 Insert LBB4162
111
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 111 DCNNG IO SA CC 22.Mar.06 Step 18 Stop Camera Installation 5 LBB4162
112
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 112 DCNNG IO SA CC 22.Mar.06 Step 19 Connecting hardware (Remove temporary PC!) BOSCH See next slide Temporary Installation PC Temporary Installation PC
113
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 113 DCNNG IO SA CC 22.Mar.06 Step 20 Connection cable between CCU and Allegiant Switcher I & U Instructions
114
ST/PRM3-EU | | © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. Security Systems 114 DCNNG IO SA CC 22.Mar.06 End of how to configure: DCN-CCU with Allegiant Video Switcher DCNNG CC
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.