1. A guide for A level students KNOCKHARDY PUBLISHING
pH calculations
A guide for A level students
KNOCKHARDY PUBLISHING

2. pH calculations www.argonet.co.uk/users/hoptonj/sci.htm INTRODUCTION
This Powerpoint show is one of several produced to help students understand selected topics at AS and A2 level Chemistry. It is based on the requirements of the AQA and OCR specifications but is suitable for other examination boards.
Individual students may use the material at home for revision purposes or it may be used for classroom teaching if an interactive white board is available.
Accompanying notes on this, and the full range of AS and A2 topics, are available from the KNOCKHARDY SCIENCE WEBSITE at...
Navigation is achieved by...
either clicking on the grey arrows at the foot of each page
or using the left and right arrow keys on the keyboard

3. pH calculations CONTENTS What is pH? - a reminder
Calculating the pH of strong acids and bases
Calculating the pH of weak acids
Calculating the pH of mixtures - strong acid and strong alkali
Calculating the pH of mixtures - weak acid and excess strong alkali
Calculating the pH of mixtures - strong alkali and excess weak acid
Check list

4. Before you start it would be helpful to…
pH calculations
Before you start it would be helpful to…
know the differences between strong and weak acid and bases
be able to calculate pH from hydrogen ion concentration
be able to calculate hydrogen ion concentration from pH
know the formula for the ionic product of water and its value at 25°C

5. where [H+] is the concentration of hydrogen ions in mol dm-3
What is pH?
pH = - log10 [H+(aq)]
where [H+] is the concentration of hydrogen ions in mol dm-3
to convert pH into
hydrogen ion concentration [H+(aq)] = antilog (-pH)
IONIC PRODUCT OF WATER Kw = [H+(aq)] [OH¯(aq)] mol2 dm-6
= 1 x mol2 dm-6 (at 25°C)

6. Calculating pH - strong acids and alkalis
WORKED
EXAMPLE
Calculating pH - strong acids and alkalis
Strong acids and alkalis completely dissociate in aqueous solution
It is easy to calculate the pH; you only need to know the concentration.
Calculate the pH of 0.02M HCl
HCl completely dissociates in aqueous solution HCl H+ + Cl¯
One H+ is produced for each HCl dissociating so [H+] = 0.02M = 2 x 10-2 mol dm-3
pH = - log [H+] = 1.7

7. Calculating pH - strong acids and alkalis
WORKED
EXAMPLE
Calculating pH - strong acids and alkalis
Strong acids and alkalis completely dissociate in aqueous solution
It is easy to calculate the pH; you only need to know the concentration.
Calculate the pH of 0.02M HCl
HCl completely dissociates in aqueous solution HCl H+ + Cl¯
One H+ is produced for each HCl dissociating so [H+] = 0.02M = 2 x 10-2 mol dm-3
pH = - log [H+] = 1.7
Calculate the pH of 0.1M NaOH
NaOH completely dissociates in aqueous solution NaOH Na+ + OH¯
One OH¯ is produced for each NaOH dissociating [OH¯] = 0.1M = 1 x 10-1 mol dm-3
The ionic product of water (at 25°C) Kw = [H+][OH¯] = 1 x mol2 dm-6
therefore [H+] = Kw / [OH¯] = 1 x mol dm-3
pH = - log [H+] = 13

8. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)

9. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)
Applying the Equilibrium Law Ka = [H+(aq)] [A¯(aq)] mol dm-3 (2)
[HA(aq)]

10. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)
Applying the Equilibrium Law Ka = [H+(aq)] [A¯(aq)] mol dm-3 (2)
[HA(aq)]
The ions are formed in equal amounts, so [H+(aq)] = [A¯(aq)]
therefore Ka = [H+(aq)]2 (3)

11. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)
Applying the Equilibrium Law Ka = [H+(aq)] [A¯(aq)] mol dm-3 (2)
[HA(aq)]
The ions are formed in equal amounts, so [H+(aq)] = [A¯(aq)]
therefore Ka = [H+(aq)]2 (3)
Rearranging (3) gives [H+(aq)]2 = [HA(aq)] Ka
therefore [H+(aq)] = [HA(aq)] Ka

12. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)
Applying the Equilibrium Law Ka = [H+(aq)] [A¯(aq)] mol dm-3 (2)
[HA(aq)]
The ions are formed in equal amounts, so [H+(aq)] = [A¯(aq)]
therefore Ka = [H+(aq)]2 (3)
Rearranging (3) gives [H+(aq)]2 = [HA(aq)] Ka
therefore [H+(aq)] = [HA(aq)] Ka
pH = [H+(aq)]

13. Calculating pH - weak acids
A weak acid is one which only partially dissociates in aqueous solution
A weak acid, HA, dissociates as follows HA(aq) H+(aq) A¯(aq) (1)
Applying the Equilibrium Law Ka = [H+(aq)] [A¯(aq)] mol dm-3 (2)
[HA(aq)]
The ions are formed in equal amounts, so [H+(aq)] = [A¯(aq)]
therefore Ka = [H+(aq)]2 (3)
Rearranging (3) gives [H+(aq)]2 = [HA(aq)] Ka
therefore [H+(aq)] = [HA(aq)] Ka
pH = [H+(aq)]
ASSUMPTION HA is a weak acid so it will not have dissociated very much. You can assume that
its equilibrium concentration is approximately that of the original concentration.

14. Calculating pH - weak acids
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows HX(aq) H+(aq) X¯(aq)

15. Calculating pH - weak acids
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows HX(aq) H+(aq) X¯(aq)
Dissociation constant for a weak acid Ka = [H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]

16. Calculating pH - weak acids
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows HX(aq) H+(aq) X¯(aq)
Dissociation constant for a weak acid Ka = [H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in [H+(aq)] = [HX(aq)] Ka mol dm-3
equal amounts and then rearrange equation

17. Calculating pH - weak acids
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows HX(aq) H+(aq) X¯(aq)
Dissociation constant for a weak acid Ka = [H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in [H+(aq)] = [HX(aq)] Ka mol dm-3
equal amounts and the rearrange equation
ASSUMPTION
HA is a weak acid so it will not have dissociated very much. You can assume that its equilibrium concentration is approximately that of the original concentration

18. Calculating pH - weak acids
WORKED
EXAMPLE
Calculating pH - weak acids
Calculate the pH of a weak acid HX of concentration 0.1M ( Ka = 4x10-5 mol dm-3 )
HX dissociates as follows HX(aq) H+(aq) X¯(aq)
Dissociation constant for a weak acid Ka = [H+(aq)] [X¯(aq)] mol dm-3
[HX(aq)]
Substitute for X¯ as ions are formed in [H+(aq)] = [HX(aq)] Ka mol dm-3
equal amounts and the rearrange equation
ASSUMPTION
HA is a weak acid so it will not have dissociated very much. You can assume that its equilibrium concentration is approximately that of the original concentration
[H+(aq)] = x 4 x mol dm-3
= x mol dm-3
= x mol dm-3
ANSWER pH = - log [H+(aq)] =

19. CALCULATING THE pH OF MIXTURES
The method used to calculate the pH of a mixture of an acid and an alkali depends on...
whether the acids and alkalis are STRONG or WEAK
which substance is present in excess
STRONG ACID and STRONG BASE - EITHER IN EXCESS
WEAK ACID and EXCESS STRONG BASE
STRONG BASE and EXCESS WEAK ACID

20. Strong acids and strong alkalis (either in excess)
pH of mixtures
Strong acids and strong alkalis (either in excess)
1. Calculate the initial number of moles of H+ and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio; calculate unreacted moles species in excess
3. Calculate the volume of solution by adding the two original volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess the ion in mol dm-3
6. Convert concentration to pH
If the excess is H+ pH = - log[H+]
If the excess is OH¯ pOH = - log[OH¯] then
pH + pOH = 14
or use Kw = [H+] [OH¯] = 1 x at 25°C therefore
[H+] = Kw / [OH¯] then
pH = - log[H+]

21. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl

22. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
25cm3 of
0.1M NaOH
20cm3 of
0.1M HCl
2.5 x 10-3 moles
2.0 x 10-3 moles
moles of OH ¯
= 0.1 x 25/1000
= 2.5 x 10-3
moles of H+
= 20 x 20/1000
= 2.0 x 10-3

23. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
25cm3 of
0.1M NaOH
20cm3 of
0.1M HCl
2.5 x 10-3 moles
2.0 x 10-3 moles
The reaction taking place is… HCl NaOH NaCl H2O
or in its ionic form H OH¯ H2O (1:1 molar ratio)

24. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
5.0 x 10-4
moles of OH¯
UNREACTED
25cm3 of
0.1M NaOH
20cm3 of
0.1M HCl
2.5 x 10-3 moles
2.0 x 10-3 moles
The reaction taking place is… HCl NaOH NaCl H2O
or in its ionic form H OH¯ H2O (1:1 molar ratio)
2.0 x 10-3 moles of H+ will react with the same number of moles of OH¯
this leaves x x = x 10-4 moles of OH¯ in excess

25. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
the volume of the solution is = 45cm3

26. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
the volume of the solution is = 45cm3
there are 1000 cm3 in 1 dm3
volume = 45/ = dm3

27. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
[OH¯] = x 10-4 / = x mol dm-3

28. Strong acids and alkalis (either in excess)
pH of mixtures
Strong acids and alkalis (either in excess)
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH is added to 20cm3 of 0.1M HCl
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of the excess species
3. Calculate the volume of the solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
6. As the excess is OH¯ use pOH = - log[OH¯] then pH + pOH = 14
or Kw = [H+][OH¯] so [H+] = Kw / [OH¯]
[OH¯] = x 10-4 / = x mol dm-3
[H+] = Kw / [OH¯] = x mol dm-3
pH = - log[H+] =
Kw = 1 x mol2 dm-6 (at 25°C)

29. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
1. Calculate the initial number of moles of H+ and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of the excess OH¯
3. Calculate the volume of solution by adding the two original volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess OH¯ in mol dm-3
6. Convert concentration to pH
either using Kw = [H+] [OH¯] = 1 x at 25°C therefore
[H+] = Kw / [OH¯] then
pH = - log[H+]
or pOH = - log[OH¯] and
pH + pOH = 14

30. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
25cm3 of
0.1M NaOH
22cm3 of 0.1M
CH3COOH
2.5 x 10-3 moles
2.2 x 10-3 moles
moles of OH ¯
= 0.1 x 25/1000
= 2.5 x 10-3
moles of H+
= 22 x 20/1000
= 2.2 x 10-3

31. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
25cm3 of
0.1M NaOH
22cm3 of 0.1M
CH3COOH
3.0 x 10-4
moles of OH¯
UNREACTED
2.5 x 10-3 moles
2.2 x 10-3 moles
The reaction taking place is CH3COOH + NaOH CH3COONa H2O
or in its ionic form H OH¯ H2O (1:1 molar ratio)
2.2 x 10-3 moles of H+ will react with the same number of moles of OH¯
this leaves x x = x 10-4 moles of OH¯ in excess

32. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
the volume of the solution is = 47cm3

33. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
the volume of the solution is = 47cm3
there are 1000 cm3 in 1 dm3
volume = 47/ = dm3

34. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
the volume of the solution is = 47cm3
there are 1000 cm3 in 1 dm3
volume = 47/ = dm3
[OH¯] = x 10-4 / = x mol dm-3

35. Weak acid and EXCESS strong alkali
pH of mixtures
Weak acid and EXCESS strong alkali
WORKED
EXAMPLE
Calculate the pH of a mixture of 25cm3 of 0.1M NaOH and 22cm3 of 0.1M CH3COOH
1. Calculate the number of moles of H+ and OH¯ ions present
2. As the ions react in a 1:1 ratio, calculate the unreacted moles of excess OH¯
3. Calculate the volume of solution by adding the two individual volumes
4. Convert volume to dm3 (divide cm3 by 1000)
5. Divide moles by volume to find concentration of excess ion in mol dm-3
6. As the excess is OH¯ use pOH = - log[OH¯] then pH + pOH = 14
or Kw = [H+][OH¯] so [H+] = Kw / [OH¯]
[OH¯] = 3x 10-4 / = x mol dm-3
[H+] = Kw / [OH¯] = x mol dm-3
pH = - log[H+] =

36. pH of mixtures EXCESS Weak monoprotic acid and strong alkali
This method differs from the others because the excess substance is weak and as such is only PARTIALLY DISSOCIATED into ions. It is probably the hardest calculation to understand.
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of the excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
6. Convert concentration to pH using pH = - log[H+]
The following example shows you how to calculate the pH of the solution
produced by adding 20cm3 of 0.1M NaOH to 25cm3 of 0.1M CH3COOH

37. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
20cm3 of
0.1M NaOH
25cm3 of 0.1M
CH3COOH
2.0 x 10-3 moles
2.5 x 10-3 moles
moles of OH ¯
= 0.1 x 20/1000
= 2.0 x 10-3
moles of H+
= 25 x 20/1000
= 2.5 x 10-3

38. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
unreacted
CH3COOH
20cm3 of
0.1M NaOH
25cm3 of 0.1M
CH3COOH
2.0 x 10-3 moles
5.0 x 10-4
moles
2.5 x 10-3 moles
The reaction taking place is CH3COOH + NaOH CH3COONa H2O
2.0 x 10-3 moles of H+ will react with the same number of H+; this leaves
2.5 x x = x 10-4 moles of CH3COOH in excess

39. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
CH3COONa
produced
20cm3 of
0.1M NaOH
25cm3 of 0.1M
CH3COOH
2.0 x 10-3 moles
2.0 x 10-3
moles
2.5 x 10-3 moles
The reaction taking place is CH3COOH + NaOH CH3COONa H2O
2.0 x 10-3 moles of H+ will produce the same number of CH3COONa
this produces 2.0 x 10-3 moles of the anion CH3COO

40. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
Substitute the number of moles of anion produced here... it will be the same as the number of moles of H+ used up
Ka = [H+(aq)] [CH3COO¯(aq)] mol dm-3
[CH3COOH(aq)]
Substitute
the Ka value
Substitute the number of moles of unreacted acid here

41. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
Substitute the number of moles of anion produced here... it will be the same as the number of moles of H+ used up
1.7 x = [H+(aq)] x (2 x 10-3) mol dm-3
(5 x 10-4)
Substitute
the Ka value
Substitute the number of moles of unreacted acid here

42. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
[H+(aq)] = x x 5 x mol dm-3
2 x 10-3
= x mol dm-3

43. EXCESS Weak monoprotic acid and strong alkali
pH of mixtures
EXCESS Weak monoprotic acid and strong alkali
WORKED
EXAMPLE
1. Calculate the initial number of moles of acid and OH¯ ions in the solutions
2. As H+ and OH¯ ions react in a 1:1 ratio, calculate unreacted moles of excess acid
3. Calculate moles of salt anion formed; 1 mol of anion is formed for every H+ removed
4. Obtain the value of Ka for the weak acid and substitute the other values
5. Re-arrange the expression and calculate the value of [H+]
6. Convert concentration to pH using pH = - log[H+]
[H+(aq)] = x x 5 x mol dm-3
2 x 10-3
= x mol dm-3
pH = - log10[H+(aq)] = 5.37

44. What should you be able to do?
REVISION CHECK
What should you be able to do?
Calculate pH from hydrogen ion concentration
Calculate hydrogen ion concentration from pH
Write equations to show the ionisation in strong and weak acids
Calculate the pH of strong acids and bases knowing their molar concentration
Calculate the pH of weak acids knowing their Ka and molar concentration
Calculate the pH of mixtures of acids and bases
CAN YOU DO ALL OF THESE? YES NO

45. You need to go over the relevant topic(s) again
Click on the button to
return to the menu

46. Try some past paper questions
WELL DONE!
Try some past paper questions

47. © 2003 JONATHAN HOPTON & KNOCKHARDY PUBLISHING
pH calculations
THE END
© JONATHAN HOPTON & KNOCKHARDY PUBLISHING