1. Number of Serious Violations – FY 2000
FHM TRAINING TOOLS
This training presentation is part of FHM’s commitment to creating and keeping safe workplaces.
Be sure to check out all the training programs that are specific to your industry.
Number of Serious Violations – FY 2000

2. Frequently Cited OSHA Violations General Industry

3. Most Frequently Cited Serious Violations General Industry – FY 2000
Machine guards - General
*Hazard Communication - Written program
Point of operation
Open-sided floors
Eye & body flushing facilities
Grinders - Tongue guards
*Hazard Communication - Training
Live electrical parts
Lockout - Program
Pulleys
Note: There were also 1023 Section 5(a)(1) General Duty Clause violations cited during this period.
* violations include both General Industry and Construction due to the consolidation of standards.
Number of Serious Violations – FY 2000

4. Subpart D - Walking/Working Surfaces (1910.21 - 30)
Open-sided floors
Housekeeping
Wet floors
Standard: 1910.
Stairways and stair platforms - Railings
Floor holes
Number of Serious Violations – FY 2000

5. Subpart E - Means of Egress (1910.35 - 38)
Obstructed egress
Means of egress not clear
EXIT
Exit marking
Standard: 1910.
Emergency action plan
Exit access minimum width (28”)
Number of Serious Violations – FY 2000

6. Subpart F - Powered Platforms (1910.66 - 68)
Vehicle-mounted elevating/rotating platforms - Body belt & lanyard
Vehicle-mounted elevating/rotating platforms – Trained operators
Standard: 1910.
Number of Serious Violations – FY 2000

7. Subpart G - Occupational Health (1910.94 - 98)
Hearing conservation program
Training program
Monitoring program
Standard: 1910.
Audiometric testing program
Administrative/Engineering controls
Number of Serious Violations – FY 2000

8. Subpart H - Hazardous Materials (1910.101 - 126)
Class I liquids - Dispensing
Compressed gases - Handling, storage and use
Spray booth - Air velocity
Standard: 1910.
Spray areas – Free from combustible residue
Sources of ignition - Precautions
Number of Serious Violations – FY 2000

9. Subpart I - Personal Protective Equipment (1910.132 - 139)
Eye & face protection
Written respiratory protection program
Standard: 1910.
Medical evaluation to determine employee’s ability to use respirator
PPE hazard assessment
Number of Serious Violations – FY 2000

10. Subpart J - General Environmental Controls (1910.141 - 147)
Lockout/Tagout - Program
Lockout/Tagout - Procedures
Lockout/Tagout - Training
Standard: 1910.
Lockout/Tagout procedure - Periodic inspection
Lockout/Tagout - Content of energy control procedures
Number of Serious Violations – FY 2000

11. Subpart K - Medical & First Aid (1910.151 - 152)
Eye & body flushing facilities
Standard: 1910.
First aid
Number of Serious Violations – FY 2000

12. Subpart L - Fire Protection (1910.155 - 165)
Extinguishers - Training program
Extinguishers - Initial & annual training
Portable extinguishers - Provided and accessible
Standard: 1910.
Extinguishers - Charged & operable
Extinguishers - Annual checks
Number of Serious Violations – FY 2000

13. Subpart M - Compressed Gas & Air Equipment (1910.166 - 169)
Pressure gage/safety valve
Standard: 1910.
Safety valves tested
Number of Serious Violations – FY 2000

14. Subpart N - Materials Handling & Storage (1910.176 - 184)
Powered Industrial Trucks – Operator training
Powered Industrial Trucks – Safe operating condition
Secure storage
Standard: 1910.
Powered Industrial Trucks – Operator certification
Powered Industrial Trucks – Examination
Number of Serious Violations – FY 2000

15. Subpart O - Machinery & Machine Guarding (1910.211 - 219)
Machine guards - General
Point of operation
Grinders - Tongue guards
Standard: 1910.
Pulleys
Grinders - Work rests
Number of Serious Violations – FY 2000

16. Subpart P - Hand & Portable Powered Tools (1910.241 - 244)
Compressed air for cleaning
Portable grinders - Guards
Portable grinders - General
Standard: 1910.
Condition of tools & equipment
Number of Serious Violations – FY 2000

17. Subpart Q - Welding, Cutting & Brazing (1910.251 - 255)
Oxygen cylinder storage - Separation: Distance
Cylinder storage - Inside of buildings
Protection from rays
Standard: 1910.
Arc welding/cutting - Maintenance of cables
Valve caps
Number of Serious Violations – FY 2000

18. Subpart R - Special Industries (1910.261 - 272)
Logging – Foot protection
Logging - First aid kit
Standard:
Logging – Visual or audible contact
Sawmills - Conveyors
Logging – Eye protection
Number of Serious Violations – FY 2000

19. Subpart S - Electrical (1910.301 - 399)
Live parts
Conductors entering cabinets/boxes/fittings protected from abrasion
Grounding path
Standard: 1910.
Electrical box covers
Use of flexible cords and cables
Number of Serious Violations – FY 2000

20. Subpart Z - Toxic & Hazardous Substances (1910.1000 - 1450)
Hazard Communication - Written program
Hazard Communication - Information and training
Hazard Communication - Training initially and for new hazards
Standard: 1910.
Hazard Communication - Material Safety Data Sheets
Hazard Communication - Label identification
Number of Serious Violations – FY 2000