Download presentation
Published byLauren Ayers Modified over 11 years ago
1
DIAS 3&4 Investigational Medicinal Products (IMP)
2
Agenda IMP formulation IMP shipment and storage Dose
Reconstitution of IMP IMP Accountability
3
IMP Formulation Supplied in vials containing white lyophilised powder for solution for injection Contains either 9 mg desmoteplase or placebo Reconstituted with 10 ml of WFI Each patient will receive: 90 μg/kg desmoteplase or placebo Single IV bolus injection over 1-2 minutes
4
This is how IMP looks! 150 x 113 x 58 mm The initial supply of medication will consist of 2 packs. Don’t break the silver seal until it is used
5
IMP Storage IMP must be stored at 2-8℃
Temperature must be monitored at least every working day and documented. In case of temperature excursion CRA need to be notified immediately Temperature will be monitored during transportation as well
6
IMP Shipment Cold Chain Shipment Upon receipt:
Check if the temperature during the transportation was within 2-8 ℃ Acknowledge the IMP receipt by making a medication arrival call in IVRS/IWRS
7
How to read TempTale Hold down the stop button until the stop icon appears No bell icon: IMP delivered within temperature range Bell icon present: IMP did not arrive within accepted temperature limits. Wait for confirmation from Lundbeck CSC TempTale needs to be returned to courier immediately!
8
Randomisation The IV/IWRS will be used for randomisation.
- Screening number - Subject’s Date Of Birth - Subject’s NIHSS Score - Date of Stroke Onset - Time of Stroke Onset (24 hour clock format) - Subject’s weight (in Kilograms) The IV/IWRS will instruct the site in an and/or fax: - The IMP number to use - The volume of mediciation to be administred
9
Reconstitution of IMP Choose assigned IMP number
Check IMP number on IV/IWRS- Randomisation confirmation Check vial and remove blue cap 2. Reconstitute lyophilized powder with 10 ml Water For Injection Agitate gently until all particles of the study medication are dissolved 10 ml Water For Injection Version 2.0: 2-April-2009
10
Reconstitution of IMP 3. Prepare a syringe (accuracy 0,2ml) with volume of IMP as given by the IV/IWRS Randomisation confirmation RANDOMIZATION FAX Patient XXX Volume: X,y ml accuracy of 0,2 ml 4. Please flush i.v. line with 10 ml WFI or Normal Saline before and after IMP administration to avoid any interaction with infusion contents! X,y ml
11
IMP Inventory Form
12
IMP Inventory Log
13
IMP re-supply Randomisation will trigger the IMP re-supply
After the 1st patient: 2 IMPs will be sent After the 2nd patient: 1 IMP will be sent
14
IMP return Used IMP must be stored in refrigerator at 2-8 ℃ on site until the patient has had the Day 90 visit After the patient has completed the study the IMP can be kept at ambient storage condition until it is returned CRA to check accountability before IMP return IMP to be returned to depot Please contact CRA when you return IMP
15
Thank you ?
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.