1. 1 Chapter 10 Protecting Data Integrity in a Multiuser Environment

2. 10 Chapter Objectives Develop code that implements database transactions Develop code that commits and rolls back transactions Identify the types of problems that occur when multiple users access a database concurrently

3. 10 Chapter Objectives Implement database, recordset, page-level, and record-level locking strategies Develop error-handling procedures that support concurrent use of a database Replicate and synchronize replicas and partial replicas of a database

4. 10 Using Transactions to Protect Against System Failure Transaction  Logical unit of work  Each unit of work comprises one or more physical database operations When a transaction completes successfully, changes that the transaction made to the database are committed to the database

5. 10 Using Transactions to Protect Against System Failure Whenever a transaction aborts, changes that it made to the database before aborting are not committed to the database  Changes are rolled back  Database fields that contain changes return to their original state

6. 10 Transaction Processing in VBA Three methods of the Connection object to define the beginning or end of a transaction in VBA:  BeginTrans  Denotes the beginning of the transaction  CommitTrans  Denotes the end of a successful transaction  Rollback Trans  Denotes the end of an unsuccessful transaction

7. 10 Additional Transaction Features and Caveats UseTransaction property  When set to Yes, a transaction is automatically defined for the query  Therefore, BeginTrans and CommitTrans methods are unnecessary FailOnError property  When set to Yes, the query results are automatically rolled back when the first error occurs

8. 10 Additional Transaction Features and Caveats Figure 10-1 Setting the Use Transaction and Fail On Error properties in query Design view

9. 10 Additional Transaction Features and Caveats Access supports a maximum of five levels of nested transactions When one transaction is nested inside another, commitments of transactions are temporary until the final CommitTrans method executes  If that method does not execute or the corresponding RollbackTrans method executes, all nested transactions are rolled back

10. 10 Additional Transaction Features and Caveats Connection object  Controls a transaction Recordsets that use a particular connection are rolled back when the RollbackTrans method is applied to the Connection object When data are updated through bound forms, Access developers have little control over the definition of a transaction  Access controls the updates

11. 10 Solving Concurrent Processing Problems Concurrent transactions  Transactions that overlap Inconsistent analysis  Type of concurrency issue Locking mechanisms  Prevent more than one transaction at a time from modifying a data object

12. 10 Solving Concurrent Processing Problems Granularity  Level of locking Write lock  Allows other users to read but not update the locked records  Prevents the lost update problem, but not prevent the inconsistent analysis problem

13. 10 Solving Concurrent Processing Problems Read lock  Prevents other users from reading or writing locked records  Prevents both the inconsistent analysis problem and the lost update problem Pessimistic locking  Locks a page or record as soon as the first field in the record is changed and releases a lock after the record is written

14. 10 Solving Concurrent Processing Problems Optimistic locking  Locks a page or record when the Update method is encountered in VBA and releases the lock after record is written Isolation level  Indicates the degree to which the transaction should be independent of other transactions Dirty read  Prevented by specifying that transaction should not read changes made by another transaction until the other transaction is complete

15. 10 Locking Records at the Database Level You can lock the entire database through the Open window Figure 10-2 Opening a database in Exclusive made

16. 10 Locking Records at the Database Level You can lock databases through startup command lines and VBA code Figure 10-3 Record locking defaults within Advanced tab of Options dialog box

17. 10 Locking Records at the Database Level Figure 10-4 Opening a database in Exclusive mode through a shortcut

18. 10 Locking Records at the Database Level Mode property of the Connection object  Used to specify whether other users can access the database  When set to the intrinsic constant adModeShareExclusive, other users cannot open a connection to the database

19. 10 Locking Records at the Database Level Table 10-1 Legal values for the Mode property

20. 10 Setting the Locking Characteristics of Bound Forms RecordsLocks property of a form and Advanced tab of the Options dialog box are used to set locking characteristics of bound forms Table 10-2 Setting the locking characteristics of bound forms

21. 10 Setting the Locking Characteristics of Bound Forms Recordset-level locks  Specified by setting the RecordLocks property to All Records in the form property sheet or to 1 in VBA Edited Record option  Locks a record (or page) as soon as a user begins to change the value of a field No Locks option  Does not lock the record until all of the changes have been made

22. 10 Record-Level Locking Techniques in VBA Locktype property  Used to adjust locking strategy of recordsets other than those associated with bound forms  adLockPessimistic  Employs pessimistic locking  adLockOptimistic  Employs optimistic locking

23. 10 The CursorType Property CursorType property of a recordset object  Indicates how to respond when others make changes Values of CursorType relevant for Jet Engine  adOpenStatic indicates that once recordset is created, it should not reflect changes, new records, or deletions made by other users  adOpenKeyset indicates that the transaction cannot view the results of another transaction until the other transaction is committed

24. 10 The IsolationLevel Property IsolationLevel property  Used to control how Access behaves in a multiple-user environment  Indicates how you should respond when others make changes  Property of a Connection object

25. 10 The IsolationLevel Property Specifies when recordsets can view changes by users  If it is set to adXactReadUncommitted:  Recordset can view changes by others before they are committed in a transaction  A dirty read is possible  adXactReadCommitted  Indicates that the transaction cannot view the results of another transaction until the other transaction is committed

26. 10 The IsolationLevel Property Table 10-3 IsolationLevel values and descriptions

27. 10 Problems with Locking Deadlock  Situation where each transaction is waiting for the other to release a locked resource and neither transaction can finish Update Retry Interval  The time, in milliseconds, that Access waits before trying to obtain the record again Number of Update Retries  Number of times Access will attempt to obtain a record

28. 10 Handling Concurrency Errors If an error handler detects a locked database, recordset, or record, the error-handling routine typically waits and then repeats the statement through the use of the Resume statement SQLState property of an Error object  Returns a value that identifies the error according to the ANSI SQL standard

29. 10 Handling Concurrency Errors Table 10-4 Commonly used values of SQL State

30. 10 Handling Concurrency Errors Number property of an Error object  Returns a long integer that is determined by the database provider and the connection Status property of a recordset object  May be consulted to gather information about the success or failure of an operation

31. 10 Handling Concurrency Errors Table 10-5 Values of the recordset Status property

32. 10 Handling Concurrency Errors Table 10-5 Values of the recordset Status property (continued)

33. 10 Database Replication Database replication  Creates copies of all or part of a database  Each copy cab reside on a different computer Synchronization  A process used to periodically distribute updates from one copy to other copies of the database

34. 10 An Overview of Replication and Synchronization Steps Design Master  Copy of the database that can propagate structural changes Two issues must be resolved during the process of creating the Design Master:  The design of the database should be analyzed to determine whether it adequately supports replication  You must determine which objects will be replicated

35. 10 An Overview of Replication and Synchronization Steps Design Master replica set  Consists of databases that share the same Design Master database Types of replicas:  Complete replica  Contains all of the data from replicable tables  Partial replica  Contains only the rows that meet a particular criterion

36. 10 An Overview of Replication and Synchronization Steps Types of views replicas can have:  Global replicas  Can be used to create other replicas and can be synchronized with any replica  Can create and then serve as a synchronization hub for local replicas  Local replicas  Can create only other local replicas and must be synchronized with the global replica that was used to create it

37. 10 An Overview of Replication and Synchronization Steps Replicas created from a particular global replica, directly or transitively through a local replica, define a replica set Figure 10-6 Replica sets

38. 10 An Overview of Replication and Synchronization Steps During synchronization, a conflict occurs when:  The same record and column in two different replicas have been updated  Two records share the same primary key and when one replica deletes a record that has a referential integrity relationship with a record in another replica

39. 10 Replication Within VBA Microsoft Jet and Replication Object Library (JRO)  Contains object that support methods that perform activities similar to the activities carried out when you replicate and synchronize through the menus  Must be checked in the References window before you can use the replication objects

40. 10 Replication Within VBA Table 10-6 Replication objects and methods

41. 10 Replication Within VBA You can create partial replicas by using the CreateReplica, Append, and PopulatePartial methods  Partial replicas are not populated through the CreateReplica method  PopulatePartial method adds data to the replica

42. 10 Chapter Summary Features such as transactions, locking, and replication help Access developers prepare an application to function in complex environments Notion of a transaction  Controls how concurrent access occurs Transaction  Logical grouping of database operations that define a unit of work

43. 10 Chapter Summary One way that transactions control database processing is by defining when changes affected by the transaction may actually be applied to the database CommitTrans and RollbackTrans connection methods  Handle problems with committing a transaction’s effects to a database

44. 10 Chapter Summary In Access, to control problems caused by the actions of multiple users, transactions use a locking scheme  Pessimistic locking  Locks a record as soon as it is edited  Optimistic locking  Locks a record when it is about to be updated

45. 10 Chapter Summary Replication  Used when more than one site needs access to an application, but network access is not available or desired  Replica  Copy of an application  Partial replica  Filters a table, so that the records in the replica are a subset of the original table’s records

46. 10 Chapter Summary Synchronization of replicas  Process where updates made in one replica are propagated to other replicas Replication difficulties occur when two replicas modify the same column and record A conflict resolution function is used to determine whether the correct value was placed in the database