1. ADDING BAR TACK AT SIDE VENT NOVEMBER 21ST 2011

2. Style:mens SS Rayon Shirt: Bar tack at Side vent. Requirement: Bar tack at side vents are required for Durability. Issue: Yarn is Pulling while adding bar tack at Side vent. In darker colors it is more visible as white yarns are showing. Solution: Bar tack can be used at side vent without yarn pulling issue with below m/c set up. M/c name- Juki Pattern # 1 X # 90 Y # 75 M/C Speed- 2000 Tension – 35 Needle size – 9 (Ball Point) DP # 5 Bar tack width at End product - ½

3. Style:mens SS Rayon Shirt: Bar tack at Side vent. M/c set up: >Pattern # 1 >X # 90 >Y # 75 >M/C Speed- 2000 >Tension – 35 >Needle size – 9 (Ball Point) >DP # 5 >Bar tack width at End product - ½

4. Style:mens SS Rayon Shirt: Bar tack at Side vent. Check the needle point regularly. Must not use Blunt needle.

5. Style:mens SS Rayon Shirt: Bar tack at Side vent. Ensure proper lighting at M/c Existing bar tack M/C do not have adequate lighting. pls add More light if required

6. Style:mens SS Rayon Shirt: Bar tack at Side vent. >Use Guideline if needed to ensure correct angle & placement. >Over tacking is not Acceptable. >Try to avoid placing bar tack at single layer

7. Style: mens SS Rayon Shirt: Bar tack at Side vent. Ensure thread tension,& maintain m/c regularly

8. Style:: mens SS Rayon Shirt: Bar tack at Side vent. Bar tack on mock ups with specific M/C Set up. Done by operator at Sewing Floor In 10 Pcs.

9. Thank You