1. Cash Flow Estimation and Risk Analysis
Chapter 12
Cash Flow Estimation and Risk Analysis
Relevant Cash Flows
Incorporating Inflation
Types of Risk
Risk Analysis

2. Proposed Project Total depreciable cost Changes in working capital
Equipment: $200,000
Shipping and installation: $40,000
Changes in working capital
Inventories will rise by $25,000
Accounts payable will rise by $5,000
Effect on operations
New sales: 100,000 $2/unit
Variable cost: 60% of sales

3. Proposed Project Life of the project Tax rate: 40% WACC: 10%
Economic life: 4 years
Depreciable life: MACRS 3-year class
Salvage value: $25,000
Tax rate: 40%
WACC: 10%

4. Determining Project Value
Estimate relevant cash flows
Calculating annual operating cash flows.
Identifying changes in working capital.
Calculating terminal cash flows: after-tax salvage value and return of NWC.
Initial OCF OCF OCF OCF4
Costs
Terminal
CFs
NCF NCF NCF NCF NCF4 1 2 3 4

5. Initial Year Net Cash Flow
Find NWC.
 in inventories of $25,000
Funded partly by an  in A/P of $5,000
NWC = $25,000 – $5,000 = $20,000
Combine NWC with initial costs.
Equipment $200,000
Installation ,000
NWC ,000
Net CF0 -$260,000

6. Determining Annual Depreciation Expense
Year Rate x Basis Deprec x $240 $ x x x $240 Due to the MACRS ½-year convention, a 3-year asset is depreciated over 4 years.

7. Annual Operating Cash Flows1 2 3 4
Revenues
200.0
– Op. costs
-120.0
– Deprec. expense
-79.2
-108.0
-36.0
-16.8
Operating income (BT)
0.8
-28.0
44.0
63.2
– Tax (40%)
0.3
-11.2
17.6
25.3
Operating income (AT)
0.5
26.4
37.9
+ Deprec. expense
79.2
108.0
36.0
16.8
Operating CF
79.7
91.2
62.4
54.7
(Thousands of dollars)

8. Terminal Cash Flow
Q. How is NWC recovered? Q. Is there always a tax on SV? Q. Is the tax on SV ever a positive cash flow?

9. Should financing effects be included in cash flows?
No, dividends and interest expense should not be included in the analysis.
Financing effects have already been taken into account by discounting cash flows at the WACC of 10%.
Deducting interest expense and dividends would be “double counting” financing costs.

10. Should a $50,000 improvement cost from the previous year be included in the analysis?
No, the building improvement cost is a sunk cost and should not be considered.
This analysis should only include incremental investment.

11. If the facility could be leased out for $25,000 per year, would this affect the analysis?
Yes, by accepting the project, the firm foregoes a possible annual cash flow of $25,000, which is an opportunity cost to be charged to the project.
The relevant cash flow is the annual after-tax opportunity cost.
A-T opportunity cost:
= $25,000(1 – T)
= $25,000(0.6)
= $15,000

12. If the new product line decreases the sales of the firm’s other lines, would this affect the analysis?
Yes. The effect on other projects’ CFs is an “externality.”
Net CF loss per year on other lines would be a cost to this project.
Externalities can be positive (in the case of complements) or negative (substitutes).

13. Proposed Project’s Cash Flow Time Line
-260 1 2 3 4
79.7
91.2
62.4
89.7
Enter CFs into calculator CFLO register, and enter I/YR = 10%.
NPV = -$4.03 million
IRR = 9.3%
MIRR = 9.6%
Payback = 3.3 years

14. If this were a replacement rather than a new project, would the analysis change?
Yes, the old equipment would be sold, and new equipment purchased.
The incremental CFs would be the changes from the old to the new situation.
The relevant depreciation expense would be the change with the new equipment.
If the old machine was sold, the firm would not receive the SV at the end of the machine’s life. This is the opportunity cost for the replacement project.

15. What are the 3 types of project risk?
Stand-alone risk
Corporate risk
Market risk

16. What is stand-alone risk?
The project’s total risk, if it were operated independently.
Usually measured by standard deviation (or coefficient of variation).
However, it ignores the firm’s diversification among projects and investor’s diversification among firms.

17. What is corporate risk?
The project’s risk when considering the firm’s other projects, i.e., diversification within the firm.
Corporate risk is a function of the project’s NPV and standard deviation and its correlation with the returns on other firm projects.

18. What is market risk?
The project’s risk to a well-diversified investor.
Theoretically, it is measured by the project’s beta and it considers both corporate and stockholder diversification.

19. Which type of risk is most relevant?
Market risk is the most relevant risk for capital projects, because management’s primary goal is shareholder wealth maximization.
However, since corporate risk affects creditors, customers, suppliers, and employees, it should not be completely ignored.

20. Which risk is the easiest to measure?
Stand-alone risk is the easiest to measure. Firms often focus on stand-alone risk when making capital budgeting decisions.
Focusing on stand-alone risk is not theoretically correct, but it does not necessarily lead to poor decisions.

21. Are the three types of risk generally highly correlated?
Yes, since most projects the firm undertakes are in its core business, stand-alone risk is likely to be highly correlated with its corporate risk.
In addition, corporate risk is likely to be highly correlated with its market risk.

22. What is sensitivity analysis?
Sensitivity analysis measures the effect of changes in a variable on the project’s NPV.
To perform a sensitivity analysis, all variables are fixed at their expected values, except for the variable in question which is allowed to fluctuate.
Resulting changes in NPV are noted.

23. What are the advantages and disadvantages of sensitivity analysis?
Identifies variables that may have the greatest potential impact on profitability and allows management to focus on these variables.
Disadvantages
Does not reflect the effects of diversification.
Does not incorporate any information about the possible magnitudes of the forecast errors.

24. What if there is expected inflation of 5%, is NPV biased?
Yes, inflation causes the discount rate to be upwardly revised.
Therefore, inflation creates a downward bias on PV.
Inflation should be built into CF forecasts.

25. Annual Operating Cash Flows, If Expected Inflation = 5%

26. Considering Inflation: Project CFs, NPV, and IRR
Terminal CF =
-260
82.1
96.1
70.0
65.1
35.0
100.1
Enter CFs into calculator CFLO register, and enter I/YR = 10%.
NPV = $15.0 million.
IRR = 12.6%.

27. Perform a Scenario Analysis of the Project, Based on Changes in the Sales Forecast
Suppose we are confident of all the variable estimates, except unit sales. The actual unit sales are expected to follow the following probability distribution:

28. Scenario Analysis
All other factors shall remain constant and the NPV under each scenario can be determined.

29. Determining Expected NPV, NPV, and CVNPV from the Scenario Analysis

30. If the firm’s average projects have CVNPV ranging from 1. 25 to 1
If the firm’s average projects have CVNPV ranging from 1.25 to 1.75, would this project be of high, average, or low risk?
With a CVNPV of 2.0, this project would be classified as a high-risk project.
Perhaps, some sort of risk correction is required for proper analysis.

31. Is this project likely to be correlated with the firm’s business
Is this project likely to be correlated with the firm’s business? How would it contribute to the firm’s overall risk?
We would expect a positive correlation with the firm’s aggregate cash flows.
As long as correlation is not perfectly positive (i.e., ρ  1), we would expect it to contribute to the lowering of the firm’s overall risk.

32. If the project had a high correlation with the economy, how would corporate and market risk be affected?
The project’s corporate risk would not be directly affected. However, when combined with the project’s high stand-alone risk, correlation with the economy would suggest that market risk (beta) is high.

33. If the firm uses a +/-3% risk adjustment for the cost of capital, should the project be accepted?
Reevaluating this project at a 13% cost of capital (due to high stand-alone risk), the NPV of the project is -$2.2.
If, however, it were a low-risk project, we would use a 7% cost of capital and the project NPV is $34.1.

34. What subjective risk factors should be considered before a decision is made?
Numerical analysis sometimes fails to capture all sources of risk for a project.
If the project has the potential for a lawsuit, it is more risky than previously thought.
If assets can be redeployed or sold easily, the project may be less risky than otherwise thought.

35. Evaluating Projects with Unequal Lives
Machines A and B are mutually exclusive, and will be repurchased. If WACC = 10%, which is better?
Expected Net CFs
Year
Machine A
Machine B
($50,000) 1
17,500
34,000 2
27,500 3 – 4

36. Solving for NPV with No Repetition
Enter CFs into calculator CFLO register for both projects, and enter I/YR = 10%.
NPVA = $5,472.65
NPVB = $3,636.36
Is Machine A better?
Need replacement chain and/or equivalent annual annuity analysis.

37. Replacement Chain
Use the replacement chain to calculate an extended NPVB to a common life.
Since Machine B has a 2-year life and Machine A has a 4-year life, the common life is 4 years.
-50,000 34,000 27,500 34,000 27,500
-50,000
-22,500 1 2 3
10% 4
NPVB = $6, (on extended basis)

38. Equivalent Annual Annuity
Using the previously solved project NPVs, the EAA is the annual payment that the project would provide if it were an annuity.
Machine A
Enter N = 4, I/YR = 10, PV = , FV = 0; solve for PMT = EAA = $1,
Machine B
Enter N = 2, I/YR = 10, PV = , FV = 0; solve for PMT = EAA = $2,
Machine B is better!