2. Instructions for using this template. Remember this is Jeopardy, so where I have written Answer this is the prompt the students will see, and where I have Question should be the students response. To enter your questions and answers, click once on the text on the slide, then highlight and just type over whats there to replace it. If you hit Delete or Backspace, it sometimes makes the text box disappear. When clicking on the slide to move to the next appropriate slide, be sure you see the hand, not the arrow. (If you put your cursor over a text box, it will be an arrow and WILL NOT take you to the right location.)

3. Choose a category. You will be given the answer. You must give the correct question. Click to begin.

4. Click here for Final Jeopardy

5. Arc Welding General Shop Safety Grinder Oxy- Acetylene Ag Machinery 10 Point 20 Points 30 Points 40 Points 50 Points 10 Point 20 Points 30 Points 40 Points 50 Points 30 Points 40 Points 50 Points Hot Metal And Hand Tools

6. Never stand here when arc welding

7. In Water or on a Wet floor

8. Electrode stubs should be placed

9. Question 2a

10. What should you do if the electrode freezes

11. Turn off the machine and free the electrode

12. What should you do before turning on the welder

13. Check Cables, connections and amperage settings

14. What Number Filter Lens Should Be Worn When Arc Welding?

15. #10

16. Who should you tell about any accident or injury no matter how minor

17. Your Teacher

18. When should you wear safety glasses?

19. Whenever you are in the shop

20. What type of shoes should be worn in the shop?

21. Closed toe, and closed heel

22. What color are stop buttons on equipment in the shop?

23. Red

24. Who is responsible for keeping everyone safe in the shop?

25. EVERYONE!

26. Files and rasps should have a __________.

27. Files and rasps should have a handle.

28. Do not offer work for inspection until it is _________.

29. Do not offer work for inspection until it is cool.

30. When welding or cutting, work should always be in a ______ or ______.

31. When welding or cutting, work should always be in a vice or clamp.

32. Which direction should you cut?

33. Away from yourself

34. Always wear _______ and ______ when handling hot metal.

35. Always wear leather gloves and a leather apron when handling hot metal.

36. How should you stop a grinder from spinning?

37. Turn it off and let it stop on its own.

38. The tool rest should be no more than ____ of an inch from the wheel.

39. The tool rest should be no more than 1/8 of an inch from the wheel.

40. Small pieces of metal should be held with ________ while grinding.

41. Small pieces of metal should be held with vice grip pliers while grinding.

42. Grinding wheels should be checked for ________, _________, and ___________.

43. Grinding wheels should be checked for cracks, chips, and balance.

44. What should be worn while grinding?

45. A Face Shield

46. What should be used to start the flame?

47. A striker (never a match or lighter)

48. Hoses should never be _____________.

49. Hoses should never be wrapped around the regulator.

50. What color is the oxygen tank?

51. Green

52. Before leaving the shop the PSI on the tanks should read _______ and the lines should be _________.

53. Before leaving the shop the PSI on the tanks should read 0 and the lines should be bled.

54. Goggles with a #_______ filter lens should be worn when oxy-acetylene welding or cutting.

55. Goggles with a #5 filter lens should be worn when oxy-acetylene welding or cutting.

56. Engines should never be started ____________.

57. Engines should never be started inside.

58. Should oily rags be placed in the trash?

59. No, put oily rags in the designated container.

60. When should spilled fuel or lubricants be cleaned up?

61. Spilled fuel or lubricants should be cleaned up immediately.

62. Tools and parts should be stored _______________.

63. Tools and parts should be stored in their proper place and not on the floor.

64. Gasoline and lubricants should be stored in _________.

65. Gasoline and lubricants should be stored in a flammable materials cabinet.

66. Make your wager

67. Proper clothing in the shop includes _____________.

68. Proper clothing in the shop includes no loose clothing, no loose jewelry, no unsecured long hair, closed toe and heel shoes that cover the whole foot, eye protection appropriate for the job, etc.