2. Location Transfers and Misc Adjustments

3. 8-1-8

4. New to version 7 -5 digits batch numbers. -Will be able to query the batch file easily. U8RECIV F4 Prompt to list batches that have info in them. Batch numbers are now 5 digits The info in all batches are in U8RECIV

5. If after pressing ENTER after entering a batch number you get the SETUP USER DEFINITION window, BEWARE……. If you get this window,.... BEWARE!!!

6. If no invoice number is entered, the system will show transfer invoice number as 0000000.

7. Set Up Steps for Inventory Transfer Area Setup the Adjustment Invoice Area8-6-11 Assign User to Adjustment Invoice Area 8-6-10 If needed – Setup laser Invoice printers8-6-12

8. The Reverse sign on Qty Y/N was created for employees that are use to running CI. Employees that use CI will like the Y/N flag.

9. F18 (SHIFT – F6) from the CI screen is a shortcut to the Location Transfer and Misc Adjustments option.

10. - Trans Types can be customer created in the inventory file setup menu option 5. (8-6-5) - When creating a transfer, dont use trans types IR, P, SA, S, AB, AT, IB, or PI because these are hard-coded in the system and may cause issues. When creating a transfer, dont use trans types IR, P, SA, S, AB, AT, IB, or PI because these are hard- coded in the system and may cause issues.

11. Depending on how the Reverse sign on Qty flag is set in the inventory constant file reflects how to enter the qty being transferred.

12. Inner-company Transfers

13. If the item number is used in both locations of the transfer, enter the FROM and TO location info.

15. If the item number is used only in the FROM location of the transfer, enter the FROM location info only.

17. Enter the item number that the TO location uses and the location number in the FROM location field.

18. Total adjustment dollar amount must be $0.00 for the system to allow the transfer to be entered.

20. Internal Use Transfers

21. Creating a trans type just for internal use is a good way to identify these transfers from regular transfers.

22. When entering the tax amount for the transfer either manually calculate the $ or…….

23. Enter your sales tax item, total extended $ amount in the QUANTITY field, and verify the tax rate in the UNIT COST field.

24. What ever the total adj $ amount says, enter the opposite amount in the extended amount field, what ever the expense G/L is, and the location in the FROM LOC field.

25. Total adjustment dollar amount must be $0.00 for the system to allow the transfer to be entered.

26. Transfer Invoice

27. Transfer Edit report

28. Adjustments to Inventory Physical Inventory Adjustments

29. 8-1-9

30. Before entering physical inventory adjustments...

31. Inventory End of Month check list

34. - Can enter either EOM date or any other date. - Current Inventory quantity will show correct counts. Can enter either EOM date or any other date. Current Inventory quantity will show correct counts.

36. Enter the quantity of your physical count.

37. If the actual inventory quantity doesnt match the current balance qty, an adjustments will post to the inventory. Either positive.....

39. Press ENTER to proceed to the merge screen or press F3 to exit.

40. Inventory Blends

41. Before creating a blend. Need to have an item number for the blend. Need to know what ingredients make up the blend. Need to know how each ingredient is inventoried. - some items may be in lbs, tons, bags Decide if the blend needs to be an AR Blend or an Inventory Blend. Whats the difference between an AR Blend and an Inventory Blend?

42. The difference is this AR BLEND When you have to count the ingredients item and not the blended items at inventory. When a sale in Counter Invoicing is invoiced, an AB adjustment will post to the blended item number which will offset the sale and reduce the inventory to the ingred item numbers The Blend Item Number needs to be an Item Code 9

43. The difference is this Inventory Blend When you have to count the blended item and the ingredients at inventory time. When a sale in Counter Invoicing is invoiced, no AB adjustment will post to the blended item number which means that there will not be no offset entry to the sale and will not reduce the inventory to the ingred item numbers The Blended Item Number is not an Item Code 9

44. Inventory Blend Setup (8-6-3)

45. Formulation basis qty should be simple to remember if the blend needs to be manually adjusted 50 lbs, 2000 lbs, 1 ton, 1 lbs, 1 bag.

46. The total quantity does not have to equal Formulation Basis Quantity.

47. AR Blends

48. Inventory Blend in CI

49. The adjustments for the blend shows in inventory as AB adjustments.

51. Inventory Blends

52. 8-1-10

53. Enter how much finished inventory that you are going to make and the location that has the ingredients and that it will be blended at.

54. Quantities and item numbers can be changes, removed, and added before finishing the blend adjustment.

55. The adjustments for the blend shows in inventory as IB adjustments.

57. Inventory Reports

58. Summary Inventory Report in Item Sequence

59. This is the only Inventory report that is known of that can be run for negative quantities. Only report in Inventory that allows you to run for negative quantity

60. Report U8INR1

61. Summary Inventory Report in G/L Number Sequence

62. This report can be used to gather total quantities and inventory values by G/L number for entry in the inventory in the general ledger.

63. Report U8INR2

64. Physical Inventory Report

65. Setup for COUNT SHEETS

66. Report U8INR3

67. Inventory Turns Report

68. For this report to calculate sales correctly, transactions types AT and AB need to show in the SALES column in the inventory inquiry screen. For this report to calculate sales correctly, transaction types AT and AB need to show in the SALES column in the inventory inquiry screen.

69. Report U8INR4

70. Standard Blends Information

72. Report U8BLR0

73. Adjustment Activity Report

75. Report U8INR7

76. Booked Inventory In G/L Sequence

78. Report U8INR8