Presentation is loading. Please wait.

Presentation is loading. Please wait.

Using Metric Tools.

Similar presentations


Presentation on theme: "Using Metric Tools."— Presentation transcript:

1 Using Metric Tools

2 1. Ruler The ruler above has an English side that uses inches and a metric side that uses centimeters. We will only use the metric side in this class. On the metric side the lines with numbers measure centimeters and the smaller lines measure millimeters. There are 10 millimeters in one centimeter.

3 Reading a Ruler In science, the last digit of a measurement is always estimated. Fractions are not used. When measuring with a ruler, 2 decimal places are needed when using cm and 1 decimal places are needed when using mm. Letter A above indicates a measurement of 0.59 cm or 5.9 mm.

4 Reading a Ruler The correct measurement for B is _______ cm or _________ mm. The correct measurement for C is ______cm or ______ mm

5 Reading a Ruler The correct measurement for B is 1.20 cm or 12.0 mm.
The correct measurement for C is 2.19 cm or 21.9 mm

6 Reading a Ruler G D D is E is F is G is

7 Reading a Ruler

8 2. Graduated Cylinders Always Read to the Bottom of the Meniscus.
The meniscus is the curved water line that occurs due to attraction of water to glass. Graduated cylinder should be at eye level when determining the volume.                                                                            

9 Graduated Cylinders

10 Graduated Cylinders

11 3. Thermometers

12 Thermometers

13 4. Triple Beam Balance Before using a TBB you must zero the balance.
To do this all riders must be sitting in the slots on the far left of the balance and nothing should be sitting on the weighing platform. If the indicator shows a reading other than “0”, there is a small knob under the left side of the weighing platform. Turn this knob slowly until the two white lines are lined up. TBBread

14 Triple Beam Balance Turning the calibration knob clockwise will move the pointer down and turning it counterclockwise will move it up. TBBread

15 To measure out a specific quantity of a powder or crystalline substance: Determine the mass of the container that will hold the substance. Add this quantity to the mass you want. For example if you want to measure out 5 grams of salt and its container has a mass of 4 grams, you come up with the number 9 grams. Set the riders for 9 grams. Slowly pour salt into the dish until the indicator levels off at zero.

16 5. To Measure Volume Cube: Side³ Rectangular solid: L • W • H
Cylinder: πr²h Liquid: Use graduated cylinder

17 Volume of small irregular shaped objects
Pour more than enough water in a graduated cylinder to cover the object. Record the amount of water in the cylinder. Drop the object into the graduated cylinder and record the new amount. Subtract the first value from the second value. Include the units (usually cm³ ) in your measurement. 1 ml = 1cm³

18 To find surface area For a rectangular surface: L x W
For a circular surface: πr²


Download ppt "Using Metric Tools."

Similar presentations


Ads by Google