1. TECHNOLOGY AND ENGINERRING SKILL STUDY PROGRAM : BUILDING TECHNOLOGY SKILL COMPETENCE : DRAWING BUILDING TECHNOLOGY

2. Teknologi dan Rekayasa DRAWING A PLAN OF MAKING RE- ENFORCE CONCRETE Basic competence  To describe a frame of reenforced concrete  To design a frame of reenfoce concrete  To draw a map of setting frame of reenforced concrete  To draw a beam of setting frame of reenforced concrete  To make a list of a beam of reenforced concrete

3. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column A. DRAWING A BEAM OF BUILDING PROVIDED BY REINFORCED CONCRETE A column is a component of building frame that has duty to bear vertical burden. it is not in partial but the long unit. A short reinforced concrete bear any burden as well as no bending side part on the beam.

4. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column Giving reinforced concrete can strengthen the power of longitudinal bearing especially for the smaller part of the beam.

5. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column The frame of beam is frequently thinner. It brings about certain bend, flax or even more broken and collapse. So the beam should be given concrete construction.

6. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column The frame of beam is frequently thinner. It brings about certain bend, flax or even more broken and collapse. So the beam should be given concrete construction.

7. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column The re-enforced concrete should be provided by the literal construction to hinder the crump and the broken coating frame of the beam.

8. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column The edge of the beam should be given an angkur. The space between the begel along the the beam should be multiflied to the diameter of the smallest concrete in order that the frame of the concrete. To prevent the frame bent, you should set the concrete as close as possible so the scale can be covered the beam properly.

9. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column Technical requirements of a concrete the scale of concrete (should be at least like the following: – depth: 2,0 cm – width : 2,5 cm – invisible : 3,0 cm

10. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column Something important to take into consideration in drawing the reinforce column:  The connector of the beam is on the “sloof”  The column intervals of the beam on the middle side is more quite rare than those at the edge.  Those who have size about 30 cm should be widely given an extra concrete  The diameter of the main column is at least 12 mm)

11. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column B. Designing a plan of column structure of the concrete building To design concrete column is started from making a map and plan of allocate the column of the beam the column of concrete can be identified after counting the column we need.

12. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns Steps of counting column of building concrete: 1.To define the amount of columns 2.To estimate the burden bearing by the concrete columns 3.To count momentary statement of columns 4.To estimate the concrete of columns 5.To estimate the powerful control of the burden that is likely stuck on the columns

13. Teknologi dan Rekayasa Drawing the map of setting the columns of reinforce structured building concrete C. Drawing the map of setting the columns of reinforce structured building concrete For example The map of setting concrete columns

14. Teknologi dan Rekayasa Drawing master plan of beaming the second floor and columns concrete setting 1. Drawing of a plan to beam the second floor and the column setting

15. Teknologi dan Rekayasa Map of foot plate, columns and “sloof”

16. Teknologi dan Rekayasa Map of foot plate, columns and concrete construction

17. Teknologi dan Rekayasa Map of foot plate, columns and concrete constructions

18. Teknologi dan Rekayasa Map of foot plate, columns and concrete constructions

19. Teknologi dan Rekayasa Map of foot plate, columns and concrete constructions

20. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns  D. Drawing of a plan to beam the second floor and the column Setting The example column reinforce of building structure

21. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column

22. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column

23. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

24. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

25. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

26. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

27. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

28. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

29. Teknologi dan Rekayasa Drawing a map of concrete column

30. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column

31. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Column

32. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns

33. Teknologi dan Rekayasa Drawing A plan of Reinforce Concrete Column

34. Teknologi dan Rekayasa Drawing A plan of Reinforced Concrete Columns Thank you Compiled by : Rina D. Kania.S.Pd SMK Negeri 2 Tasikmalaya