1. Mimio Troubleshooting

2. Pen Check battery by pushing in the end of the point.
You will hear a soft electric sound if it is working.
Install new batteries (correctly) to solve the problem.

3. Device Setup Install software and follow directions.
Clear off whiteboard (take down decorations and other things that might cause interference)
Erase and clean board thoroughly
Make sure cables are all attached in proper places
Place device in top left corner with at least one hand’s width apart from projection. (you can move the device to other areas – you will need to go to the settings tab to change orientation.

4. Attachment Suction cups – don’t work well
Pull tabs – will leave a residue on the board
Magnets – do not fit well – still falls down
Suggestion – try not to move the computer or device once it is set up

5. Calibration Click calibrate
Make sure to touch the pen exactly in the middle of the x in the circle – otherwise the pen doesn’t calibrate properly
Whether you like it or not the Mimio needs to be calibrated often

6. Other
Pen is spotty when writing – you must keep contact with pen and board while writing
Unable to calibrate – adjust the surface size for the Mimio device and verify that it is same size as the whiteboard surface
Do not expose Mimio device with direct sunlight
Some other electrical devices can interfere with your device
Do not place anything between the device and whiteboard
Don’t forget to update software
If all else fails – turn off all devices, uplug everything and begin again

7. Help
Mimio setup pdf
Mimio user guide pdf