1. Tri-Tech Medical Inc.
Medical Gas Outlets

2. Medical Gas Outlets DISS Ohmeda style Allied style Puritan style
Recessed wall
DISS Recessed ceiling
Surface wall
Console / Headwall
Ambulance / Surgical Arm

3. Common Backs Recessed/Console Ambulance/ Surgical Arm
360º swivel inlet tube
1/2” OD copper tubing
Accommodates all styles of Outlet Latch Plates
ETL listed
Ambulance/ Surgical Arm
360º swivel inlet tube
DISS or hose barb
Accommodates all styles of Outlet Latch Plates
ETL listed

4. DISS Outlets Frontall™ design Gangable Full faceplate color coding
5 inch centers
Primary & secondary checks
360° positioning of extension tube

5. DISS Surface Outlets Frontall™ design Full faceplate color coding
Primary & secondary checks

6. Frontall™ Feature
Allows routine service of both the primary and secondary check valves without removing the nameplate or gas specific portions.
Very fast & easy to service
Primary check cartridge

7. Repairing DISS Front Bodies
These parts would be ordered separately
Cartridge (Negative and Positive gases)
Primary Check Seat and Ball Check (Positive gases only)
Chrome-Plated Body

8. Ohmeda Style Outlets

9. Ohmeda Style Outlets
Accepts Ohmeda gas specific compatible male adaptors
Gangable
5” centers
Allows routine service of both the primary and secondary check valves.
Full faceplate color coding

10. Ohmeda Style Surface Outlet
Accepts Ohmeda gas specific compatible male adaptors
Allows routine service of both the primary and secondary check valves.
Full faceplate color coding

11. Repairing Ohmeda style fronts
Remove screws
Remove body and plate

12. U-clip and washer remain.
Front body and plate

13. Replace body
Replace plate and screw

14. XQ1000-D Ohmeda style Front Latch Body
Can be ordered as an assembly, or in parts

15. Allied Style Outlets

16. Allied Style Outlets
Accepts Allied style gas specific compatible male adapters
Gangable, 5” centers
Full faceplate color coding
1/2” OD copper tubing
Metal back and front plates
360º swivel inlet tube

17. Allied Style Surface Outlets
Accepts Allied gas specific compatible male adapters
Full faceplate color coding

18. Repairing an Allied Style Front
Remove screws
Remove body and plate

19. Place body on housing and replace plate
Position o-ring and washer on new body

20. Replace Screws

21. XA1000-D Front Latch Body
Can be ordered as an assembly, or in parts

22. Puritan Style Outlets

23. Puritan Style Outlets
Accepts Puritan style gas specific compatible male adapters
Gangable, 5” centers
Full faceplate color coding
1/2” OD copper tubing
Metal back and front plates
360º swivel inlet tube

24. Puritan Style Outlets
Accepts Puritan gas specific compatible male adapters
Full faceplate color coding

25. Repairing a Puritan Style Front
Using manual screwdriver, remove screws
Remove body and small plate

26. Remove ONLY these parts

27. Screw plate back in place with Manual screwdriver.
Do not over tighten
Replace parts or entire body

28. XP1000-E Puritan Latch Body
Can be ordered as an assembly or in parts

29. Console / Headwall Outlets
Available in DISS, Ohmeda, Puritan and Allied styles
DISS style includes Frontall™ features
Full faceplate color coding
Optional trim plate available

30. Console / Headwall Outlets

31. Console / Headwall Outlets

32. Ambulance / Surgical Arm Outlets
Available in DISS and Quick Connect styles
DISS and hose barb inlet connections
DISS includes Frontall™ features
Full faceplate color coding

33. DISS x ¼” npt outlets and DISS x hose barb outlets

34. Fairfield Rail

35. Fairfield Rail Outlets
Three different styles

36. Outlet Conversion Kits

37. Conversion Kits

38. Conversion Kit - Disassembly

39. Conversion Kits - Disassembly

40. Conversion Kits - Installation

41. Trim Plates Single gang through six gang
Large array of on center spacing
Can be customized to meet your needs

42. Ohmeda to Ohmeda Conversion Kits
Available for Diamond I to Diamond III
Available for Diamond II to Diamond III
Easy to install
Easy to service

43. Other Ohmeda Conversion Kits
Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III
Easy to install and service

48. NFPA 99 REQUIREMENTS FOR
STATION OUTLETS/INLETS TRI-TECH PRODUCT
GAS SPECIFIC YES
STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES
STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES
SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES
EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO YES
THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS) YES
STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC
NOT INTERCHANGEABLE YES
COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN
AND LESS THAN 8 INCHES LONG YES
COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN
ADDITIONAL TESTING PERFORMED BY TRI-TECH
INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE
AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW
IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING

49. Gas Control Panels and Gas Control Panel Conversion Kits
Tri-Tech Medical Inc.
Gas Control Panels and
Gas Control Panel Conversion Kits

50. Gas Control Panel Stainless steel front Self-relieving regulator
Frontall™ DISS outlet features
High quality ball valve
Painted steel rough-in box
2” Inlet & outlet pressure gauges

52. MIDAS REX EQUIPMENT:
APPROX 5% OF TOOLS IN FIELD ARE OLDER TOOLS REQUIRING PSI CFH LPM
NEW TOOLS REQUIRE
PSI CFH LPM
OR CFH LPM
NITROGEN CONTROL PANEL
MAXIMUM FLOW CAPACITY BASED ON 180 PSI INLET
FLOWING TO ATMOSPHERE
STATIC DEL FLOW FLOW DEL PRESS
PRESSURE PSIG SCFH LPM FLOWING PSIG

53. Gas Control Panel Conversion
Converts existing panels by several major brands
Same features as our regular panel
Easy to install using a universal mounting plate over existing back box

54. Gas Control Panel Conversion
Existing back box

55. Gas Control Panel Conversion
Installing conversion connections

56. Gas Control Panel Conversion
Installing conversion plate

57. Gas Control Panel Conversion
Back of the front panel conversion

58. Gas Control Panel Conversion
Connecting tube

59. Gas Control Panel Conversion
Installing gas control panel