1. Security Systems BU Communication SystemsDCN ST/SEU-CO 1 Stand Alone Camera Control 09.12.2004 How to configure Stand Alone Camera Control

2. Security Systems BU Communication SystemsDCN ST/SEU-CO 2 Stand Alone Camera Control 09.12.2004 This presentation is intended to guide the installer step by step through camera control installation.

3. Security Systems BU Communication SystemsDCN ST/SEU-CO 3 Stand Alone Camera Control 09.12.2004 Standalone DCN system with Camera Control Direct Camera Control With Allegiant Video Switcher

4. Security Systems BU Communication SystemsDCN ST/SEU-CO 4 Stand Alone Camera Control 09.12.2004 Direct Camera Control (Stand Alone) Requirements : One Dome Camera One Monitor CCU with TCB4 DCN software V9.30 or higher!!! Temporary installation PC Software LBB3562 V2.0 or higher!!!

5. Security Systems BU Communication SystemsDCN ST/SEU-CO 5 Stand Alone Camera Control 09.12.2004 Step 1 Connect PC and Monitor to Dome Camera Temporary PC with one Comport Temporary PC with one Comport RS232 AutoDome Camera Make sure that the Dome camera has an address.

6. Security Systems BU Communication SystemsDCN ST/SEU-CO 6 Stand Alone Camera Control 09.12.2004 Step 2 Install virtual keyboard software LTC 5138/00 Virtual Keyboard Program Virtual Keyboard Program Temporary PC with one Comport Temporary PC with one Comport RS232 AutoDome Camera

7. Security Systems BU Communication SystemsDCN ST/SEU-CO 7 Stand Alone Camera Control 09.12.2004 Step 3 Configure Virtual Keyboard

8. Security Systems BU Communication SystemsDCN ST/SEU-CO 8 Stand Alone Camera Control 09.12.2004

9. Security Systems BU Communication SystemsDCN ST/SEU-CO 9 Stand Alone Camera Control 09.12.2004 Make sure you choose the right camera!!

10. Security Systems BU Communication SystemsDCN ST/SEU-CO 10 Stand Alone Camera Control 09.12.2004 Camera nr = Camera Address Keep in mind !!

11. Security Systems BU Communication SystemsDCN ST/SEU-CO 11 Stand Alone Camera Control 09.12.2004

12. Security Systems BU Communication SystemsDCN ST/SEU-CO 12 Stand Alone Camera Control 09.12.2004

13. Security Systems BU Communication SystemsDCN ST/SEU-CO 13 Stand Alone Camera Control 09.12.2004 Step 4 Set Pre-Positions

14. Security Systems BU Communication SystemsDCN ST/SEU-CO 14 Stand Alone Camera Control 09.12.2004

15. Security Systems BU Communication SystemsDCN ST/SEU-CO 15 Stand Alone Camera Control 09.12.2004 Repeat Step 4 to set all Pre-Positions Set the highest Pre-Position as overview

16. Security Systems BU Communication SystemsDCN ST/SEU-CO 16 Stand Alone Camera Control 09.12.2004 Step 5 Check the Pre-Positions

17. Security Systems BU Communication SystemsDCN ST/SEU-CO 17 Stand Alone Camera Control 09.12.2004 If you were not successful setting up the pre-positions please don’t continue with the next steps. First make sure that the pre-positions are set.

18. Security Systems BU Communication SystemsDCN ST/SEU-CO 18 Stand Alone Camera Control 09.12.2004 DCN CCU Temporary PC with one Comport Temporary PC with one Comport LBB 3500/x5 RS232 Step 6 Connect CCU to PC Baudrate 9.6K

19. Security Systems BU Communication SystemsDCN ST/SEU-CO 19 Stand Alone Camera Control 09.12.2004 Step 7 Change baudrate of CCU Now you have to change the baudrate of Port 1(on the CCU) to 9.6K!! Port 1 Protocol = Camera Control Baudrate = 9.6K

20. Security Systems BU Communication SystemsDCN ST/SEU-CO 20 Stand Alone Camera Control 09.12.2004 LBB3500/15 & LBB3500/35 Port 1 Protocol = Full Baudrate = 115.2K Port 2 Protocol = Camera Control Baudrate = 9.6K Keep in mind !! You have to change the baudrate of Port 2 to 9.6K! If you are using LBB3500/15 or LBB3500/35

21. Security Systems BU Communication SystemsDCN ST/SEU-CO 21 Stand Alone Camera Control 09.12.2004 If you are using the LBB3500/15 or /35 make sure you connect the RS232 cable to Port 2.

22. Security Systems BU Communication SystemsDCN ST/SEU-CO 22 Stand Alone Camera Control 09.12.2004 DCN CCU Camera Control Program Camera Control Program Temporary PC with one Comport Temporary PC with one Comport LBB 3500/x5 RS232 Step 8 Install Camera Control Software LBB3562 Baudrate 9.6K

23. Security Systems BU Communication SystemsDCN ST/SEU-CO 23 Stand Alone Camera Control 09.12.2004 Make sure you choose the configuration without Allegiant Video Switcher

24. Security Systems BU Communication SystemsDCN ST/SEU-CO 24 Stand Alone Camera Control 09.12.2004 Step 9 Start Camera Installation software

25. Security Systems BU Communication SystemsDCN ST/SEU-CO 25 Stand Alone Camera Control 09.12.2004 Step 10 Combine seat numbers with camera pre positions

26. Security Systems BU Communication SystemsDCN ST/SEU-CO 26 Stand Alone Camera Control 09.12.2004 Make sure you choose the right camera!! Camera nr = Camera Address Keep in mind !!

27. Security Systems BU Communication SystemsDCN ST/SEU-CO 27 Stand Alone Camera Control 09.12.2004

28. Security Systems BU Communication SystemsDCN ST/SEU-CO 28 Stand Alone Camera Control 09.12.2004 5

29. Security Systems BU Communication SystemsDCN ST/SEU-CO 29 Stand Alone Camera Control 09.12.2004 DCN CCU AutoDome Camera RS232 Step 11 Connect CCU to AutoDome Camera Baudrate 9.6K

30. Security Systems BU Communication SystemsDCN ST/SEU-CO 30 Stand Alone Camera Control 09.12.2004 ©Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties.

31. Security Systems BU Communication SystemsDCN ST/SEU-CO 31 Stand Alone Camera Control 09.12.2004 With use of Allegiant Video Switcher Requirements : Allegiant switcher Video Switcher keyboard Fixed and /or AutoDome cameras Monitor(s) DCN software V8.00 or higher Temporary installation PC with two Comports Software LBB3562 V1.0 or higher

32. Security Systems BU Communication SystemsDCN ST/SEU-CO 32 Stand Alone Camera Control 09.12.2004 If you have DCN software V9.30 or higher then you need LBB3562 V2.0 or higher Otherwise it will not work. Keep in mind

33. Security Systems BU Communication SystemsDCN ST/SEU-CO 33 Stand Alone Camera Control 09.12.2004 Step 1 Connect Camera(s),Monitor(s) and Keyboard to Video Switcher

34. Security Systems BU Communication SystemsDCN ST/SEU-CO 34 Stand Alone Camera Control 09.12.2004 Step 2 Connect PC to Allegiant Switcher and CCU DCN CCU Allegiant Switcher RS232 Temporary PC with two Comports Temporary PC with two Comports Baudrate 19.2K

35. Security Systems BU Communication SystemsDCN ST/SEU-CO 35 Stand Alone Camera Control 09.12.2004 The default COM port settings are: Com 1 for communication with the CCU Com 2 for communication with the Video Switcher Keep in mind !!

36. Security Systems BU Communication SystemsDCN ST/SEU-CO 36 Stand Alone Camera Control 09.12.2004 Step 3 CCU protocol and Serial Port settings Make sure that the port you use of the CCU is set to : Protocol = Camera Control Baudrate = 19.2K LBB3500/05 The default setting for the LBB3500/05 is : Port 1 Protocol = Camera Control Baudrate = 19.2K Keep in mind !!

37. Security Systems BU Communication SystemsDCN ST/SEU-CO 37 Stand Alone Camera Control 09.12.2004 LBB3500/15 & LBB3500/35 The default settings for the LBB3500/15 &LBB3500/35 is : Port 1 Protocol = Full Baudrate = 115.2K Port 2 Protocol = Camera Control Baudrate = 19.2K Keep in mind !!

38. Security Systems BU Communication SystemsDCN ST/SEU-CO 38 Stand Alone Camera Control 09.12.2004 If you are using the LBB3500/15 or /35 make sure you connect the RS232 cable to Port 2.

39. Security Systems BU Communication SystemsDCN ST/SEU-CO 39 Stand Alone Camera Control 09.12.2004 Step 4 Install Camera Control software LBB3562

40. Security Systems BU Communication SystemsDCN ST/SEU-CO 40 Stand Alone Camera Control 09.12.2004 Make sure you choose the configuration with Allegiant Video Switcher

41. Security Systems BU Communication SystemsDCN ST/SEU-CO 41 Stand Alone Camera Control 09.12.2004 Step 5 Start Camera Installation software

42. Security Systems BU Communication SystemsDCN ST/SEU-CO 42 Stand Alone Camera Control 09.12.2004 Step 6 Set Pre-Positions using the Video Switcher Keyboard

43. Security Systems BU Communication SystemsDCN ST/SEU-CO 43 Stand Alone Camera Control 09.12.2004 Step 7 Combine seat numbers with camera pre positions

44. Security Systems BU Communication SystemsDCN ST/SEU-CO 44 Stand Alone Camera Control 09.12.2004

45. Security Systems BU Communication SystemsDCN ST/SEU-CO 45 Stand Alone Camera Control 09.12.2004 5

46. Security Systems BU Communication SystemsDCN ST/SEU-CO 46 Stand Alone Camera Control 09.12.2004 Step 8 Connect CCU to Allegiant Video Switcher DCN CCU Allegiant Switcher RS232 Baudrate 19.2K

47. Security Systems BU Communication SystemsDCN ST/SEU-CO 47 Stand Alone Camera Control 09.12.2004 How to configure Stand Alone Camera Control End of section  Robert Bosch GmbH All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner.