1. Product Technical Document
Model Name
Document NO.
KX-TDE100 / KX-TDE200 / KX-TDE600
H-CAB-A-E-10000
Title
KX-TDE MPR V2.01 KX-TDE MPR Version 3 Product Specification
Total Page : 19
Rev.1.3 July 14, 2009
Note : - Specifications are subject to change without notice Specifications for TDA and NCP in this document are for reference TDA50 is model name of TDA30 in US market This document is not applied for Japan market.
©2009 Panasonic Communications CO., LTD. Communication Network Company
Issued by
Approved by
Checked by
Prepared by
S. Mitsuo
T. Yoshida
K. Ryu
R. Nonaka
July 14, 2009
July 10, 2009
July 9, 2009
Copy to
Panasonic sales company Representative sales agency PRDCM PCCUK / PCCSW / PCC-OST

2. Revision Revision Item Explanation Prepared by 0.1 All 1st draft 0.2
R. Nonaka May 30, 2008
0.2
2nd draft
R. Nonaka August 26, 2008
1.0
Official release Content does not change from revision 0.2.
R. Nonaka September 8, 2008
1.1
ABC DEF
Features based on market request are added.
R. Nonaka November 6, 2008 1
32 IP-GW(H.323) + 32 SIP-GW for V3 Total 32 ch for V2 2
Feature Enhancement for SIP SLT step 2 TDE MPR V3 => V4 13
TDE SMDR : 10,000 calls TDE600 SMDR : 20,000 calls

3. Revision Revision Item Explanation Prepared by 1.2 A
Condition is added to conference improvement.
R. Nonaka December 15, 2008 G
CSTA “Button Press” works without “Enhanced Feature” activation key. H
Default data is revised. 1
More than 49ch talking is under study for V4. 13
Condition is added to SMDR expansion.
1.3
ABCD 1
These were planned at version 4 for NCP. (Previous information was “V4 Study”)
R. Nonaka July 9, 2009
2 5
SIP extension more enhancement and IP expansion card were dropped from version 4 for TDE and NCP. (Previous information was “V4 Study”) 6
ESVM hardware on TDE MPR is updated to new version. Mass production change is informed by PCR.
Default of dial tone is revised from 10s to 250s.

4. Feature Enhancement No. Feature Explanation NCP TDE A
Conference feature improvement
- Broadcast feature supports 2nd mode newly ) Broadcasting mode (Same as current spec) Max.32 parties / one way talk at first 2) Group call conference mode Max.8 parties / 2 way talk without operation by coordinator - Public CO call is supported for broadcast feature (both modes). - Remote users can join during broadcasting (both modes) through DISA using PIN, even if they could not answer call from coordinator. DISA is released automatically after join. - Broadcast member can be assigned by CSTA as well as PCMC.
MPR V4 (Planned)
MPR V3
TDA : N/A
N/A
For
USA
KX-TDE
DISA
Record conference to Softphone

5. Feature Enhancement No. Feature Explanation NCP TDE B
Common extension numbering for 2 or more PBXs
- Only for H.323 supported by MPR card
MPR V4 (Planned)
MPR V3
Fukuoka Office
Tokyo Office
2nd Floor
IP Network
201
306
103
1st Floor
301
104
105
101
102
205
TDA : N/A

6. Feature Enhancement No. Feature Explanation NCP TDE C
CLIP of extension which set Fwd can be informed to ISDN by option.
MPR V4 (Planned)
MPR V3 D
ARS for dial 011 and 0 is supported.
- Even if ARS for dial 011 (International call from North America) is assigned, dial 0 (call operator of telephone company) is available. E
DECT distinctive ringing for ICD group call is supported.
- This feature can be enabled by PCMC sales company level.
MPR V2 F
Softphone controlled by MPR also can be tried without activation key, when user can log in to CA Pro trial mode.
- Software version up of XP/Vista/Mobile Softphone (in CA) is not required for this improvement. - XP/Vista Softphone controlled by IP extension card has trial mode since version 1.
TDA : N/A
TDA : N/A
TDA : N/A
TDA : N/A

7. Feature Enhancement No. Feature Explanation NCP TDE G
CSTA “Button Press” works without “Enhanced Feature” activation key.
- Communication Assistant version 2 supports transfer retrieve. “Button Press” is used for the feature.
MPR V2
MPR V3 H
Default data is revised.
- Built in Communication Assistant : “Disable” to “Enable” - Hold Tone to IP-PT : Change to same tone as TDA - Flash key mode : “Recall” to “EFA” (Only for USA and Canada) - Dial Tone Timer : 10s to 250s s was not enough for CA user and NT400 user to search contact for transfer Dial tone for TD1232 does not have timer limitation This default change helps the UCD agents with held call to make their status busy for more long time by keeping the phone off-hook. Even this timer expires a hold recall will take the place of it to keep their status busy (Currently UCD agent may receive new other incoming call after hold + 10s dial tone and 10s reorder tone.)
TDA : N/A
TDA : N/A

8. Feature Enhancement No. Feature Explanation NCP TDE 1
128 IP-PT by MPR card is supported.
MPR V4 (Planned)
MPR V3 2
Feature enhancement for SIP-SLT Step 2
- Unscreened Transfer for SIP-SLT except KX-HGT PBX feature support by dial “flexible numbering” step 2
MPR V4 Drop
MPR V4 Drop 2A
Feature enhancement for SIP-SLT Step 1
- Unscreened Transfer for Panasonic KX-HGT PBX feature support by dial “flexible numbering” step 1
MPR V2
Virtual Card in MPR
MPR V2 Limitation
32ch IP-PT Card (incl. Softphone)
2 cards (64ch)
4 cards (128ch)
32ch SIP Ext Card
16ch SIP CO Card
2 cards (32ch)
3 cards (32ch)
16ch IP-GW Card
MPR V3
4 cards (128ch)
8 cards (192ch) *2)
2 cards (32ch)
4 cards (64 ch) *1)
*1) 32(V2) -> 64(V3) is supported. *2) 49ch talking at the same time except IP extension P2P talk More than 49ch talking is planned for V4.
TDA : N/A
TDA : N/A
TDA : N/A

9. Feature Enhancement No. Feature Explanation NCP TDE 3
Built-in Communication Assistant and NT400 are supported.
Specification is basically same as CA for NCP1000.
Max. 128 users (NT400 : 64)
Log-in user number without activation key is as follows < CA > < PA > Reference
MPR V MPR V2 for NT400
MPR V3 4
CTI for system wireless extension is supported.
Specification is basically same as NCP1000.
MPR V2
Actually 240 CA is supported by TDE (Not NCP) without PCMC sales company level programming. But official spec is 128.
PBX
CA Pro Trial (60 days)
CA Basic (No limit)
NCP1000
2 users
5 users
TDE
4 users
10 users
TDE600
8 users
20 users
PBX
PA Pro Trial (60 days)
PA Express (No limit)
TDA30/50
2 users
5 users
TDE
4 users
10 users
TDE600
8 users
20 users
TDA : N/A
TDA : N/A

10. Virtual Card for 32 ch IP-PT Card or 32 ch SIP Ext Card
Feature Enhancement
No.
Feature Explanation
NCP
TDE 5
IP-CS is supported.
Specification is basically same as NCP1000.
MPR V2
MPR V3
TDA : N/A
PBX
A. IP-CS 8 ch
B. D-PT CS 8 ch
C. Other CS 2ch / 4 ch
MAX.CS
B x 2 + C
(A+B) x 2 + C
NCP500
8 units
2 units
4 units 4
---
NCP1000 8
TDE
16 units
32 units 32
TDE600
64 units
128 units
128
Total 128 ch with IP Extension in MPR *) 49 ch talking at the same time
Virtual Card for 32 ch IP-PT Card or 32 ch SIP Ext Card
Virtual Card for 4 IP-CS
IP-CS
4 cards / 128 ch
0 card
0 unit / ch
3 cards / 96 ch
1 card
4 units / 32 ch
2 cards / 64 ch
2 cards
8 units / 64 ch
1 card / 32 ch
3 cards
12 units / 96 ch
0 card / 0 ch
4 cards
16 units / 128 ch
more 48 units with IP Expansion Card (MPR V4 : Study) = Total 64 units (Target) => IP Expansion Card was dropped from version 4.

11. Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 6
Music on Hold by ESVM card is supported One ch of ESVM card is occupied only for one MOH.
- New hardware version (for high quality recording) is recommend for music on hold feature.
*) ESVM hardware on TDE MPR is updated to new version. Mass production change is informed by PCR MPR V3 software supports both ESVM old and new hardware version.
MPR V2
MPR V3
PBX
ESVM Card Max. Installation
Music on Hold Max. CH
NCP
4 cards
1 ch by external + 6 ch by ESVM
TDE
2 ch by external + 6 ch by ESVM
TDE600
16 cards
SVM Card
Hardware Version CH
on NCP MPR
New 2
on TDE MPR
Old to New *)
on TDE600 MPR
ESVM2 / ESVM4 for OPB3
2 / 4
TDA : N/A

12. Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 7
Screened transfer from cellular phone is supported as well as unscreened transfer.
- Screened transfer to extension (# + Ext No.) - Screened transfer using paging (# + *33 + Group No.) - Conference (# + Ext No. + # + 3)
MPR V2
MPR V3 8
DDI number for cellular extension is informed as CLIP when call is made through DISA from cellular phone.
- Currently caller ID of cellular phone or CLIP on CO line is informed. 9
Busy Display by DSS Key when cellular phone is busy.
MPR V1 10
Intercept for call forwarded to CO (cellular phone, network extension and so on) is supported. 11
Transfer recall to Intercept destination is supported. Transfer recall to VM Group is supported.
MPR V2.01
TDA : N/A
TDA : N/A
TDA : N/A
TDA600 : N/A
TDA30/ : MPR V5
TDA600 : N/A
TDA30/ : MPR V5

13. Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 12
Hotel “Cleaned Up” button is supported. - Operation using PT is basically same as [Check-in] button Control from CTI is also available.
MPR V1
MPR V3
MPR V2 13
SMDR Expansion by MEC card is supported.
- KX-TDE0105 works for TDE as well as TDE *) SMDR 10,000 calls + Hotel 8,000 calls are available by PCMC sales company level with MEC.
MPR V4 Study
TDA600 : N/A
TDA30/ : MPR V5
PBX
SMDR
Hotel
w/o MEC
with MEC
TDA30/50
200 calls
N/A
TDA
4,000 calls
TDA600
1,000 calls
8,000 calls
NCP
TDE V2
TDE V3
10,000 calls
TDE600 V2
TDE600 V3 *)
20,000 calls

14. Feature Enhancement No. Feature Explanation NCP TDE 100 200 TDE 600 14
2 CLIP for one extension is supported.
- ARS itemized code can be 2nd CLIP by option.
MPR V2
MPR V3 15
Automatic recover from analog CO busy out is supported. 16
One channel activation key is supported One channel activation key for TDE600 works for TDE also.
MPR V1
MPR V2.01 17
Message waiting for Panasonic SIP-SLT KX-HGT100 is supported. 18
Public SIP CO compatibility is increased.
*) Compatibility list is informed by different document.
TDA600 : N/A
TDA30/ : MPR V5
TDA600 : N/A
TDA30/ : MPR V5
TDA : N/A
TDA : N/A
TDA : N/A

15. Reference

16. Roaming to Remote Office by IP CS
Main Office
Remote Office
KX-TDE / NCP
IP Network
IP-CS
DECT
DECT
IP-CS
D-PT CS CS
IP-PT
- You can use your DECT handset in branch office or home, as well as in main office.

17. CTI for PS
Main Office
Remote Office
IP Network
KX-TDE / NCP
IP-CS CS
- Wired telephone is removed from some advanced office. All of extension users have PS instead of D-PT. - When user is working with PC on desk, user wants to dial from Phone book in PC and sets Fwd using PC. (Same as D-PT user) => Target : Business application such as Communication Assistant

18. Cellular Phone as Extension
Busy Display by DSS key when Cellular Phone as Extension is on the phone
Telephone Network (Yokohama : 045)
Telephone Network (Fukuoka : 092)
Cellular Network (080)
Main : DDI : xx
KX-TDE / NCP
Customer ( )
Screened Transfer
Extn102
Extn103
Extn 202 Virtual PS ( )
Extn101
PT ( )
Extn102
PT ( )
Extn 202 Cell Phone ( )
ICD Group
DSS key for 102 becomes red, even when ICD group call is received by the paired cellular phone, or even when call is made by the paired cellular phone through PBX using DISA.
can be informed to network as CLIP when call from cellular phone.

19. End of Document