1. NS1000 V3.0 - Hospitality features-
Rev July., 2013

2. Table of Contents
1. Overview
2. Features
3. How to program 2

3. Chapter 1
Overview 3

4. Check-in/Check-out Room Status Monitor
1. Overview
Solution
Use special hotel features for effective and productive management.
Features and Benefits >>
* Features New for V3
Wake-up Calls/ Remote Wake-up Calls
Available to set from 3rd Party SIP phone
Hotel guests can set various wake-up call message.
Wake-up calls can also be set by an operator.
2 phones can be allocated with same EXT No. at each room
Any combination of phone devices can be allocated at each room
under same EXT number.
MW lamp supported on 3rd Party SIP phone*
MW lamp on 3rd Party SIP phone can be controlled.
Check-in/check-out room status monitor
Can check Room Status at a glance.
Check-in/Check-out Room Status Monitor
Property Management System (PMS) interface
A variety of hotel functions are possible when combined with a Fedelio or other PMS system.
Including check in/out, wake up calls, message waiting LED , room status, and call accounting.
External relay control
External sensing devices, such as security alarms or smoke detectors, can be installed

5. Chapter 2
Features 5

6. 2-1. Enhancement of 3rd party SIP Device
Function Overview
NS1000 will support following function from V3.0 for 3rd party SIP device
Message waiting indication
There are 2 types of methods to deliver MWI to 3rd party SIP devices.
NS1000 will support both type of Message interface
a) Unsolicited mode :MWI without SIP subscription
b) Standard mode :MWI with SIP subscription (*1)
2) Timed Reminder (available for UT phone as well)   Time reminder control operation and function is same as level as SLT.
Following table shows 3rd Party SIP device, available above function
Device Type
SIP Devices
IP Phone
Grandstream (GXV3175)
Yealink (VP2009)
Teledec(ND2200)
Softphone PC
Counter path (Bria, x-lite)
Android
Media5 (Media5-fone)
IOS
1) P2P connection with H.264 video codec
NS1000 supports video codec for SIP terminal as follows.
Video codec
Ver.1,2
Ver.3
H.263
Yes
H.264 No
2) Support Message waiting indication
NS1000 delivers Message Waiting Indication to 3rd party SIP devices based on RFC3842. With this feature, Users can notice new message arrivals such as voice mail.
NS1000 supports 2 types of methods to deliver MWI to 3rd party SIP devices.
a) MWI without SIP subscription
b) MWI with SIP subscription (TBD)
Supported MWI includes following features.
- Message arrival (have or have not)
- Number of message (new / old)
<Target of 3rd party SIP devices> (TBD)
Device Type
SIP Devices
IP Phone
Grandstream (GXV3175)
Yealink (VP2009)
Teledec(ND2200)
Softphone PC
Counter path (Bria, x-lite)
Android
Media5 (Media5-fone)
IOS
3) Timed Reminder
Timed Reminder is supported with 3rd party SIP phones. The operation is same level as SLT.
KX-UT series SIP phone also support Timed Reminder but operation and indication is same level as SLT.
4) T.38 support at Extension
NS1000 supports T.38 at extension side for Fax. IP-Fax can be connected to NS1000 as SIP terminal and Fax data can be sent / received with G.729 codec
Note: *1 There is limitation. Max 64 SLT can be controlled by this mode

7. 2-1. Enhancement of 3rd party SIP Device
Enhanced Video Phone connection
V3 will support P2P connection with H263(V2)/264(V3) video codec I/F
Note:
Hold and transfer operation from/to
Video Phone is now supported
SIP Carrier
VPN
Branch HQ
1) P2P connection with H.264 video codec
NS1000 supports video codec for SIP terminal as follows.
Video codec
Ver.1,2
Ver.3
H.263
Yes
H.264 No
2) Support Message waiting indication
NS1000 delivers Message Waiting Indication to 3rd party SIP devices based on RFC3842. With this feature, Users can notice new message arrivals such as voice mail.
NS1000 supports 2 types of methods to deliver MWI to 3rd party SIP devices.
a) MWI without SIP subscription
b) MWI with SIP subscription (TBD)
Supported MWI includes following features.
- Message arrival (have or have not)
- Number of message (new / old)
<Target of 3rd party SIP devices> (TBD)
Device Type
SIP Devices
IP Phone
Grandstream (GXV3175)
Yealink (VP2009)
Teledec(ND2200)
Softphone PC
Counter path (Bria, x-lite)
Android
Media5 (Media5-fone)
IOS
3) Timed Reminder
Timed Reminder is supported with 3rd party SIP phones. The operation is same level as SLT.
KX-UT series SIP phone also support Timed Reminder but operation and indication is same level as SLT.
4) T.38 support at Extension
NS1000 supports T.38 at extension side for Fax. IP-Fax can be connected to NS1000 as SIP terminal and Fax data can be sent / received with G.729 codec
NS1000

8. 2-2. Features on TDE/NCP V4.2, V5, V6
Function Overview
NS1000 now catch up TDE/NCP V5 and V6 functions from V3.0
Following functions will be available
DECT Paging without PS setting
Emergency Alert
Duplicate numbering plan for Hotel function

9. Function and programing
Chapter 3
Function and programing 9

10. 3. Function and Program 3.1 DECT Paging
1. Conference group call can be answered automatically without automatic
Setting for each extension PT user can start “talking” by dialing any key during broadcasting mode,
as well as DECT user.
<PBX Configuration> -> <3. Group> -> <9. Conference Group >
Automatic Answer
Enable: Automatic Answer Mode
Disable: No automatic Answer
Ability to Talk
Enable: PT/DECT can stat to talk
Disable: Can not start to talk
How to make Conference Call
Note: Conference group call has to be enabled
or coordinator using class of service.

11. 3. Function and Program 3.2 Emergency Alert -1
Emergency alert is displayed on PC installed in office, when emergency number is dialed from guest room. This feature is for SMDR based application such as Panasonic CA Call Accounting (free of charge).
Note 1. Alert is displayed twice Duration is output as zero second after dialing Version up is NOT required for CA Call Accounting
4. Up to 10 Emergency Dial can set up
5. System Option must be enabled

12. 3. Function and Program 3.2 Emergency Alert -2
1. System setting for Emergency Notification timing
<PBX Configuration> -> <11. Maintenance> -> <1. Main > -> <SMDR Option TAB>
Select Emergency Notification either
Stat and End Call or End call
2. Emergency Dial data
<PBX Configuration> -> <7. TRS> -> <4. Emergency Dial >
Enter Emergency Dial up to 30 digits

13. 3. Function and Program
3.3 Duplicate Numbering plan for Hotel -
Duplicated extension numbering for hotel is now available by NS1000
On Right hand case, Extension # and Room Number can be matched.
In this case following operation is available
<One digit call> Dial 2 + Time Out or dial # to call extension 2 for room service. Dial to call extension 201.
<Room No. = Extension No.> Dial Time Out or dial # to call Ext 101 (Room 101 ) Dial to call Ext 1011 (Room 1011)
Room (Ext 1101)
Room (Ext 1102) ..
Room (Ext 1111)
Room (Ext 1001)
Room (Ext 1002)
Room (Ext 1011)
Room (Ext 901)
Room (Ext 902)
Room (Ext 911)
Room (Ext 201)
Room (Ext 202)
Room (Ext 211)
Room (Ext 101)
Room (Ext 102)
Room (Ext 111)
Note:
This function is controlled by Reserved Bit
(Default is Disable)
<Hotel Room /Extension Number> 13

14. 3. Function and Program 3.3 Duplicate Numbering plan for Hotel -2
Activate Duplicate Extension Numbering
<PBX Configuration> -> <2. System> -> <9. System Option > -> <Reserved Bit TAB>
Reserved Bit 0E-2 must be on to enable this function

15. 3. Function and Program 3.3 Duplicate Numbering plan for Hotel -3
Programing Hint
To realize sample Extension number configuration and One digits service,
following program setting must be done
Room (Ext 1101)
Room (Ext 1102) ..
Room (Ext 1111)
Room (Ext 1001)
Room (Ext 1002)
Room (Ext 1011)
Room (Ext 901)
Room (Ext 902)
Room (Ext 911)
Room (Ext 201)
Room (Ext 202)
Room (Ext 211)
Room (Ext 101)
Room (Ext 102)
Room (Ext 111)
1,1xx,10xx,11xx can be assigned
as Extension number
<Hotel Room /Extension Number>

16. END

17. Modification
　3 NS1000 V3.0 Hospitality features_Rev1.0_30Jun2013.pptx
- 1st release
　3 NS1000 V3.0 Hospitality features_Rev1.1_31Jun2013.pptx
- Add Video Phone operation P7