Presentation is loading. Please wait.

Presentation is loading. Please wait.

EDIT MODE The HAAS Control Series PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS INFORMATION.

Published byDenisse Hiley Modified over 10 years ago

Similar presentations

Presentation on theme: "EDIT MODE The HAAS Control Series PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS INFORMATION."— Presentation transcript:

1

2 EDIT MODE The HAAS Control Series

3 PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS INFORMATION To advance through the presentation click on your left mouse button or press. To exit press. OTHER INFORMATION

4 EDIT MODE This module is intended to provide you with a familiarization of the Edit Mode on the Haas Control

5 Here is where you find the Edit Buttons

6 Pressing the edit button on the control will display the current program for editing. You can also use LIST PROGRAMS or MDI/DNC to select a program to edit. Edit Buttons EDIT: INSERT: ALTER: DELETE: UNDO:

7 Edit Button: With the program you want to edit selected, Press to go into Advanced Editor. Advanced Editor will be covered as a separate module. Press to go into the “Normal” Edit Mode. (Large Format Edit) Edit Button: O91002 HELP PROGRAM (EDIT) O91002 N00000 F1 KEY TURNS MENU ON/OFF PROGRAM EDIT SEARCH MODIFY I/O ; (Mill Engraving HAAS Logo) ; T1 M06 (TOOL#1 – ENGRAVING TOOL) ; G90 G54 G00 X-0.7355 Y0.429 ; S5000 M03 ; G00 G43 H01 Z1. M08 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; O91002

8 Insert Button: Used to move text in the input buffer into the program after the current cursor location. Can also move blocks of code from one location in a program to another. In Block Edit (Covered Later) you can select a block of code from one program and insert it into another program. Insert Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 G03 X0.2475 Y0.5508 R0.02 ; X0.2275

9 Insert Button: Used to move text in the input buffer into the program after the current cursor location. Can also move blocks of code from one location in a program to another. In Block Edit (Covered Later) you can select a block of code from one program and insert it into another program. Insert Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ;

10 Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. Alter Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226

11 Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. Alter Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226 ;

12 Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. Alter Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; X0.7226 :

13 Alter Button: Used to change cursor-selected text to whatever is displayed in the input buffer. In Block Edit it can shift a block of code from one place in a program to another. Alter Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ;

14 Alter Button: To save a program listed in MDI to the program list. Type the new program number Onnnnn; (one that is not already being used) into the input buffer then Press Alter Button: G01 PROGRAM (MDI ) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ; O12345 NOTE: The MDI screen will go blank, but the program is now in the program list under the number you entered.

15 Delete Button: Used to delete the item that the cursor is on. In Block Edit it can also be used to delete a block of code in a program. Can be used to delete entire message on the message screen. Delete Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ;

16 Undo Button: Used to undo up to the last 10 edit changes. Will Not let you undo anything done in Block Edit. In Block Edit you can perform operations on one or more lines in a program. Operations include: block duplication, block move & block delete. Undo Button: G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7226 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 ; G03 X0.2475 Y0.5508 R0.02 ;

17 In Advanced Editor Mode Press to define the beginning block of program lines, then scroll down and Press again to define the end of the block of lines to edit. In the 40 column editor Press to define the beginning of the block and Press to define the end of that block to edit. To get out of block edit, Press G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; >G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ;

18 In Advanced Editor Mode Press to define the beginning block of program lines, then scroll down and Press again to define the end of the block of lines to edit. In the 40 column editor Press to define the beginning of the block and Press to define the end of that block to edit. To get out of block edit, Press G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; >G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ;

19 In Advanced Editor Mode Press to define the beginning block of program lines, then scroll down and Press again to define the end of the block of lines to edit. In the 40 column editor Press to define the beginning of the block and Press to define the end of that block to edit. To get out of block edit, Press G01 PROGRAM (EDIT) O91002 N00000 G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y0.2275 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ; G01 X0.3058 Y0.5308 ; G01 X0.2275 G03 X0.2475 Y0.5508 R0.02 ;

20 Prepared by Haas Automation Training Department Oxnard, CA 93030

Download ppt "EDIT MODE The HAAS Control Series PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS INFORMATION."

Similar presentations

Word processing vocabulary.

Word processing vocabulary.
Creating & Editing Tables Keyboarding 1A. To Create a Table: From the Menu Bar, select Table select Insert select Table Type in the number of columns.

Creating & Editing Tables Keyboarding 1A. To Create a Table: From the Menu Bar, select Table select Insert select Table Type in the number of columns.
Database Basics. What is Access? Database management system Computer-based equivalent of a manual database Makes it easy to organize and update information.

Database Basics. What is Access? Database management system Computer-based equivalent of a manual database Makes it easy to organize and update information.
Online Leave Request Employee Training

Online Leave Request Employee Training
MS-Word XP Lesson 7.

MS-Word XP Lesson 7.
ResponseCard XR Creating Tests and Homework ®. Navigating the Menu Press the MENU button to bring up the Main Menu. Press the Down Arrow twice to select.

ResponseCard XR Creating Tests and Homework ®. Navigating the Menu Press the MENU button to bring up the Main Menu. Press the Down Arrow twice to select.
Create the cover page by inserting clip art, WordArt, and text. Triple-click and enter your name here. Do not press the delete key! Triple-click and enter.

Create the cover page by inserting clip art, WordArt, and text. Triple-click and enter your name here. Do not press the delete key! Triple-click and enter.
Endangered Species To use this template, you will first need to save it by choosing file from your menu bar and clicking on save as. In this activity you.

Endangered Species To use this template, you will first need to save it by choosing file from your menu bar and clicking on save as. In this activity you.
Microsoft Excel Khan Mohammad Mahmud Hasan www.mahmudhasan.com.

Microsoft Excel Khan Mohammad Mahmud Hasan
LIST PROGRAMS MODE The HAAS Control Series PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS.

LIST PROGRAMS MODE The HAAS Control Series PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: SLIDE LEGEND ACTIONS INSTRUCTIONS KEYS.
 Use the Left and Right arrow keys or the Page Up and Page Down keys to move between the pages. You can also click on the pages to move forward.  To.

 Use the Left and Right arrow keys or the Page Up and Page Down keys to move between the pages. You can also click on the pages to move forward.  To.
Office 2003 Post-Advanced Concepts and Techniques M i c r o s o f t Excel Project 7 Using Macros and Visual Basic for Applications (VBA) with Excel.

Office 2003 Post-Advanced Concepts and Techniques M i c r o s o f t Excel Project 7 Using Macros and Visual Basic for Applications (VBA) with Excel.
Word Processing First Steps

Word Processing First Steps
MDI/DNC MODE The HAAS Control Series. MDI/DNC MODE The HAAS Control Series.

MDI/DNC MODE The HAAS Control Series. MDI/DNC MODE The HAAS Control Series.
MEMORY MODE The HAAS Control Series. MEMORY MODE The HAAS Control Series.

MEMORY MODE The HAAS Control Series. MEMORY MODE The HAAS Control Series.
Customizing Word Microsoft Office Word 2007 Illustrated Complete.

Customizing Word Microsoft Office Word 2007 Illustrated Complete.
Advanced Tool Management Information Module Advanced Tool Management Information Module.

Advanced Tool Management Information Module Advanced Tool Management Information Module.
XP New Perspectives on Microsoft Office Word 2003 Tutorial 1 1 Microsoft Office Word 2003 Tutorial 1 – Creating a Document.

XP New Perspectives on Microsoft Office Word 2003 Tutorial 1 1 Microsoft Office Word 2003 Tutorial 1 – Creating a Document.
Hard Drive Information Module Hard Drive Information Module.

Hard Drive Information Module Hard Drive Information Module.
1 Using Editors Editors let you create and edit ASCII files UNIX normally includes two editors: vi and Emacs Vi and Emacs are screen editors: they display.

1 Using Editors Editors let you create and edit ASCII files UNIX normally includes two editors: vi and Emacs Vi and Emacs are screen editors: they display.

Similar presentations

Ads by Google