1. ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled (CNC) Machine Mercer University School of Engineering Industrial Engineering Course Project David Harris (Industrial Engineering) Russell Hazelrig (Industrial Engineering) Chris Meador (Industrial Engineering)

2. Project Goal and Solution Develop design of part Choose material (blue wax) Draft dimensioned drawing in AutoCAD Write program using G-code Use Computer Numerically Controlled (CNC) Machine to manufacture part Use Coordinate Measuring Machine (CMM) to check part quality Student Projects Department of Industrial Engineering and Industrial Management Slide 2

3. Dimensioned Drawing Student Projects Department of Industrial Engineering and Industrial Management Slide 3

4. Partial Code for CNC Production of Cross N1 07778 CROSS N2 M6 T5 N3 G0 G90 S1500 M3 E1 X0 Y0 N4 H5 Z1.0 D5 N5G41 X1.2094 Y-0.2969 N6 G1 Z-0.5 F20 N7 G1 X1.7906 Y-0.2969 N8 G3 X1.7906 Y-1.2749 R+1.2456 N9G3 X1.2597 Y-0.9780 R+1.4872 N10 G1 X1.4523 Y-1.1551 N11 G1 X1.2597 Y-1.3311 N12 G3 X0.5812 Y-1.3311 R+1.4872 N13 G3 X0.5812 Y-2.9062 R+3.1470 N14 G1 X0.0 Y-2.9062 Student Projects Department of Industrial Engineering and Industrial Management Slide 4

5. Student Projects Department of Industrial Engineering and Industrial Management Slide 5 Verify Dimensions Using CMM Machine

6. Final Machined Part – The Cross Student Projects Department of Industrial Engineering and Industrial Management Slide 6 Dr. Joan Burtner, Chair Recruitment and Retention Committee Email: Burtner_J@Mercer.edu Mercer University School of Engineering 1400 Coleman Avenue Macon, GA Phone: (478) 301- 4127 Contact Information Mr. Bill Campbell Engineering Lab Supervisor Mercer University School of Engineering 1400 Coleman Avenue Macon, GA Acknowledgements