Download presentation
Presentation is loading. Please wait.
Published byBradyn Fairweather Modified over 9 years ago
1
3.3.1
2
What is a State Transition Diagram? Why are they used? How to draw them.
3
A system can be defined at any one point as being in a particular state... Whether it is ready to receive an input or processing data ready for it to be output. State Transition Diagrams (STD) basically map out the state of a system in diagram form. This type of diagram essentially describes the behaviour of the system.
4
There are only two states for a door...open or closed. The transitions are opening or closing. Door Closed Door Open Door Closing Door Opening
5
States are shown as locations. Transitions are represented by arrows. – These are the reasons why the state is changing. – For example... The state changes because the door is opening. Door Closed Door Open Door Opening
6
An input may have different effects on a state. Multiple transitions can result from the same state (as in this diagram). 1. Empty 4. Sealed 2. Check bottle 3. Full 5. Broken B1: Squirt (n) IF (content + n) >= capacity THEN Go to B2 ELSE Go to B3 B3: Not full B2: Full B4: Screw on cap B5: Break
7
First of all we have to squirt water into the bottle at a quantity of n. We then check the bottle to see if it is full. If it isn’t full we go through the transition of B3: Not full as the state is still considered to be Empty. 1. Empty 2. Check bottle B1: Squirt (n) IF (content + n) >= capacity THEN Go to B2 ELSE Go to B3 B3: Not full
8
When we have reached a full state then we can place the cap on the bottle. The transition is B4: Screwing on a cap. We then arrive at a state of Sealed. 1. Empty 4. Sealed 2. Check bottle 3. Full B1: Squirt (n) IF (content + n) >= capacity THEN Go to B2 ELSE Go to B3 B3: Not full B2: Full B4: Screw on cap
9
The state Broken is reached if the bottle breaks. If the bottle was full at point 2 and then isn’t at state full you can assume the bottle is broken. 1. Empty 4. Sealed 2. Check bottle 3. Full 5. Broken B1: Squirt (n) IF (content + n) >= capacity THEN Go to B2 ELSE Go to B3 B3: Not full B2: Full B4: Screw on cap B5: Break
10
Try drawing an STD which covers the following states: – Filling up a kettle – Boiling the water – Pouring the water into mugs (note: do not worry about the mugs...I am more concerned with the state of the kettle). – This is the first state... 1. Empty
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.