2. Foreign Disclosure 1 Click on the Normal View icon located in the lower left hand corner of your screen to read the detailed notes on the AN/PEQ-2A Hide this slide during your presentation Click on the Slide View icon to get a detailed look at the slides on the AN/PEQ-2A Administrative Notes Click on the Slide Show icon to rehearse the presentation with animation and present your class Click on the Slide Sorter View icon to look at all the slides at once and hide the slides that will not be taught by RIGHT clicking on it and then LEFT clicking on HIDE SLIDE

3. Foreign Disclosure 1 AN/PEQ-2A

4. Foreign Disclosure 1 Terminal Learning Objective ACTION- Qualify with the AN/PEQ-2A CONDITIONS- During hours of darkness, given an M16A1/A2/A4, M4 Carbine, M4 Modular Weapon System, M249 SAW, M60 machinegun, M240B machine gun or M2 machine gun, Night vision device (NVD), AN/PEQ-2A, Qualification range, qualification scenario, 25Meter offset, 10m borelight offset and the appropriate number of rounds for the weapon being zeroed and qualified IAW the corresponding FM. STANDARDS- Answer at least 14 of 20 questions on a written test; qualify M16A1/A2/A4, M4 carbine and MWS: at least 17 out of 40; M249, M60 and M240B: at least 6 out of 11 on transition range IAW TM 11-5855-308-12&P

5. Foreign Disclosure 1 Safety Requirements: Classroom Environment Risk Assessment: Low Environmental Considerations: None Evaluation: All instruction is testable and will be included on the General Subjects Examination to include the written exam and the performance evaluation Instructional Lead-In:

6. Foreign Disclosure 1 AgendaAgenda 1. CHARACTERISTICS 2. PMCS 3. PUT INTO OPERATION 4. ZEROING PROCEDURES 5. FIRING TABLES AND STANDARDS 6. PRACTICAL EXERCISE 7. PERFORMANCE EVALUATION 8. WRITTEN TEST 9. FIELD FIRE 10. PRACTICE QUAL. AND QUALIFICATION

7. Foreign Disclosure 1 Enabling Learning Objective A Action: Identify Characteristics of the AN/PEQ-2A Conditions: Given 4 (AA) batteries, a NVD and an AN/PEQ-2A Standards: Identify the six characteristics and the six components of the AN/PEQ-2A. IAW TM 11-5855-308- 12&P

8. Foreign Disclosure 1 DANGER INVISIBLE LASER RADIATION - AVOID DIRECT EXPOSURE TO THE BEAM 25METER DANGER AREA IN DUAL LO 25 METER DANGER AREA IN DUAL LO 220METER DANGER AREA IN TACTICAL MODE 220 METER DANGER AREA IN TACTICAL MODE TRAINING MODE “LO” IS EYESAFE LO mode + magnification = not eye safe CHARACTERISTICSCHARACTERISTICS

9. Foreign Disclosure 1 CHARACTERISTICS AN/PEQ-2A DESCRIPTION: INFRARED AIMING POINTDESCRIPTION: INFRARED AIMING POINT (STEADY BEAM) (STEADY BEAM) LENGTH: 6.4 inLENGTH: 6.4 in WEIGHT: 7.5 ozWEIGHT: 7.5 oz BATTERY LIFE: DEPENDANT ON MODE SELECTION OPERATIONAL USE AND AMBIENT TEMPURATURE.BATTERY LIFE: DEPENDANT ON MODE SELECTION OPERATIONAL USE AND AMBIENT TEMPURATURE. RANGE: BEYOND 600 METERS. RANGE: BEYOND 600 METERS. Actual range depends on light levels and night vision device used for observation.

10. Foreign Disclosure 1 BATTERY COMPARTMENTS - 2 - AA SAFETY BLOCK MOUNTING SCREW POWER LED CHARACTERISTICSCHARACTERISTICS

11. Foreign Disclosure 1 ILLUMINATOR FOCUS KNOB AIMING LASER LENS CAP ILLUMINATOR ILLUMINATOR LENS CAP AIMING LASER CHARACTERISTICSCHARACTERISTICS REMOTE JACK PLUG IS NOT RE-USABLE

12. Foreign Disclosure 1 12” & 25” REMOTE RETAINER STRAPS TRAINING EXTENDER M4/M16A2 BRACKET ASSEMBLY BRACKETADAPTER INSIGHTRAILGRABBER PICATINNYRAILGRABBER Pattern Generator X 5X 5X 5X 5 CHARACTERISTICSCHARACTERISTICS

13. Foreign Disclosure 1 (1)Remove Filter Cap from aiming laser (2)Install Optical Instrument Reticle (OIR) or pattern generator pattern generator (1)(2)(2) (3) OIR will not work mounted on the illuminator (3) Optical Instrument Reticle (OIR) / Pattern Generator CHARACTERISTICSCHARACTERISTICS

14. Foreign Disclosure 1 Optical Instrument Reticle (OIR) / Pattern Generator 5 Patterns 1.Circle 2.½ moon 3.Square 4.Cross 5.Triangle CHARACTERISTICSCHARACTERISTICS

15. Foreign Disclosure 1 Mounting Systems CHARACTERISTICSCHARACTERISTICS

16. Foreign Disclosure 1 DO NOT DAMAGE GAS TUBE ARMORER IS THE ONLY ONE AUTHORIZED TO INSTALL BRACKET MOUNTING RAIL M4/M16A2 Bracket Assembly CHARACTERISTICSCHARACTERISTICS

17. Foreign Disclosure 1 Insight Rail Grabber You must tool tighten the slot in the screw to tighten the rail grabber Tighten during initial mounting Retighten after the first 3 round shot group Locking Clamp CHARACTERISTICSCHARACTERISTICS

18. Foreign Disclosure 1 Picatinny Rail Grabber You must double click the Torque Limiting Knob Tighten during initial mounting Retighten after the first 3 round shot group Locking Clamp CHARACTERISTICSCHARACTERISTICS

19. Foreign Disclosure 1 Training Mode Blue Tactical Mode Black 0 = Off 1.= Aim LO 2.= Dual LO 3.= Aim HI 4.= Dual LO/HI 5.= Dual HI/HI 1. Eye safe 2. Eye safe beyond 25m 3-5. Eye safe beyond 220m #1 When used with bino’s, glasses, 3x extender or any other magnification is not eye safe any other magnification is not eye safe CHARACTERISTICSCHARACTERISTICS

20. Foreign Disclosure 1 PUSH BUTTON SWITCH HOLD = ON DOUBLETAP = CONTINUOUS ON TAP AGAIN TO TURN OFF MODE SELECTOR MUST BE ON TO ACTIVATE PUSH BUTTON SWITCH TRAINING MODES Near targets/low illumination TACTICAL MODES Far targets/high illumination Remote works in same manner as push button switch CHARACTERISTICSCHARACTERISTICS

21. Foreign Disclosure 1 ALL ADJUSTERS: 1 CLICK = 1 cm AT 25 METERS AIMING POINT ADJUSTERS ILLUMINATOR ADJUSTERS ILLUMINATOR ADJUSTERS MECH ZERO = FULL CW, BACK 5.5 TURNS MECH ZERO = FULL CW, BACK 5.5 TURNS DO NOT OVER TURN ADJUSTERS TOP/BOTTOM = ELEVATION SIDE = WINDAGE CW TO STOP CW TO STOP 5.5 TURNS CCW 5.5 TURNS CCW FRONT FLANGE FRONT FLANGE CHARACTERISTICSCHARACTERISTICS

22. Foreign Disclosure 1 Right side mounted UP/LEFT = CCW CHARACTERISTICSCHARACTERISTICS WINDAGE ADJUSTMENT ELEVATION ADJUSTMENT

23. Foreign Disclosure 1 Top side mounted UP/RIGHT =CW CHARACTERISTICSCHARACTERISTICS ELEVATION ADJUSTMENT WINDAGE ADJUSTMENT

24. Foreign Disclosure 1 WARNING:SIGNATURE INCREASED WITH NVD’S IN SMOKE, RAIN AND FOG ZERO YOUR ILLUMINATORS ZEROED ILLUMINATOR AIMING POINT ILLUMINATOR UNZEROED AIMING POINT FILTER - SMALLER & REFINED ILLUMINATOR FILTER - EXPANDS & DISPERSES CHARACTERISTICSCHARACTERISTICS

25. Foreign Disclosure 1 Enabling Learning Objective B Action: Perform PMCS on the AN/PEQ-2A Conditions: Given an AN/PEQ-2A, NVD, DA 2404, Pencil, lens paper, 4 AA batteries and TM 11-5855-308- 12&P Standards: Perform PMCS IAW TM 11-5855-308-12&P w/in 5 minutes

26. Foreign Disclosure 1 Dirt - Remove any lose dirt and wipe off outer case Dirt - Remove any lose dirt and wipe off outer case Damage - Broken casing or Broken lens Moisture - look through lenses for condensation or wetness Inspect battery caps: Caps present Caps present Threads clear Threads clear 0-rings present 0-rings present Battery fresh Battery fresh O-rings waterproof the AN/PEQ-2A Ensure lens caps are not cracked or missing

27. Foreign Disclosure 1 1.PUSHED REMOTE SWITCH, WON’T COME ON 2.TURNED ON SELECTOR SWITCH WON’T COME ON 3.AN/PEQ-2A WON’T STAY ON CONTINUOUSLY 4.TOO MUCH BLOOMING ON ZERO TARGET 5.AIMING LIGHT TOO DIM DOWN RANGE 6.ILLUMINATOR IS NOT ON 7.YOU CAN SEE TWO AIMING POINTS DOWN RANGE 8.IN DUAL LO YOU CAN’T FIND THE ILLUMINATOR 9.ILLUMINATOR DOESN’T ILLUMINATE AIMING POINT 10.IN AIM LO YOU GET TWO AIMING POINTS 8. YOU NEED TO REMOVE THE ILLUMINATOR FILTER OR REDUCE THE ILLUMINATOR SIZE 3. YOU DIDN’T DOUBLE TAP THE ACTIVATOR SWITCH 4. NEED TO INSTALL AIMING POINT FILTER 5. YOU NEED TO REMOVE THE AIMING POINT FILTER 6. YOUR NOT IN DUAL LO 7. YOU NEED TO EXPAND THE ILLUMINATOR 9. YOU NEED TO ZERO THE ILLUMINATOR 10. YOU NEED TO CLEAN THE AIMING POINT LENS 2. DIDN’T PUSH ACTIVATOR SWITCH 1. SELECTOR LEVER IS OFF

28. Foreign Disclosure 1 Enabling Learning Objective C Action: Put the AN/PEQ-2A into Operation Conditions: Given an AN/PEQ-2A, NVD, 4 AA batteries, selected weapon, and proper zero offsets for the selected weapon combination Standards: Put the AN/PEQ-2A into Operation IAW TM 11-5855-308-12&P

29. Foreign Disclosure 1 AN/PEQ-2A into Operation MOUNTING M4/M16A2 BRACKET MOUNTING RAIL

30. Foreign Disclosure 1 AN/PEQ-2A into Operation MOUNTING

31. Foreign Disclosure 1 Tighten 2 clicks AN/PEQ-2A into Operation M16A4 and Modular Weapon System AN/PEQ-2A into Operation M16A4 and Modular Weapon System Zero Retention Must use the same notch Rail Grabber & Rail only Top or right mount Remove heat shield Push in on detent and slide off adapter rail Note Locking bar position Use slot to tighten Once zeroed, if you remove the AN/PEQ-2A from rail grabber you will not retain zero

32. Foreign Disclosure 1

33. Mount Rail Grabber To IFTC Mount AN/PEQ-2A on Rail Grabber NOTE: TIGHTEN RAIL GRABBER UNTIL IT CLICKS TWICE OR USE SLOT TO TIGHTEN OR USE SLOT TO TIGHTEN With Integrated Feed Tray Cover (IFTC) Mount between Notches T-11 through T-15

34. Foreign Disclosure 1 OPERATION 240B Laser off and install batteries Mount rail grabber on AN/PEQ-2A (Use slot) Mount rail grabber onto Picatinny rail NOTE: TIGHTEN RAIL GRABBER UNTIL IT CLICKS TWICE OR USE SLOT TO TIGHTEN OR USE SLOT TO TIGHTEN or Mount between Notches T-3 through T-12

35. Foreign Disclosure 1 MILES ADAPTER OPERATION M16A2 bracket assembly and Insight rail grabber only

36. Foreign Disclosure 1 AN/PEQ-2A WITH MILES BRACKET

37. Foreign Disclosure 1 STORAGE CONFIGURATION RETURN AN/PEQ-2A Remove Batteries Rail Grabber tightened Put all of the accessories back into the bag Remove filters from illuminator and aiming point Return AN/PEQ-2A back into bag FILTER CAPS

38. Foreign Disclosure 1 Enabling Learning Objective D Action: Boresight the AN/PEQ-2A Conditions: Given a selected weapon with an AN/PEQ- 2A, 5 (AA) batteries, borelight, stable platform, NVGs and offset for AN/PEQ-2A on selected weapon Standards: Correctly Zero the Borelight and Boresight the AN/PEQ-2A IAW TM 11-5855-308-12&P

39. Foreign Disclosure 1 BORESIGHT M16/ M4 SERIES USE OFFSET FOR SELECTED WEAPON AND CONFIGURATION STABILIZE WEAPON (CRUCIAL) ZERO BORELIGHT BORESIGHT AIMING POINT WITH NVGs BORESIGHT ILLUMINATOR WITH NVGs (NARROW BEAM)

40. Foreign Disclosure 1 BORESIGHT M249/M60/240B REMEMBER! USE OFFSET FOR SELECTED WEAPON AND CONFIGURATION STABILIZE WEAPON ON TRI-POD AND T&E (CRUCIAL) ZERO BORELIGHT BORESIGHT AIMING POINT WITH NVGs BORESIGHT ILLUMINATOR WITH NVGs (NARROW BEAM)

41. Foreign Disclosure 1 Enabling Learning Objective E Action: Zero the AN/PEQ-2A Conditions: At night, given either an M16A1/A2/A4, M4 Carbine or MWS, AN/PEQ-2A, NVGs, 25 meter range, ear plugs and 18 rounds of 5.56mm ammunition Standards: Zero the AN/PEQ-2A to the selected weapon with less than 18 rounds

42. Foreign Disclosure 1 To reduce blooming on the target ZERO PROCEDURES TARGET PREPARATION Cut out a 3 centimeter square from the center of target Draw in the impact zone on the target

43. Foreign Disclosure 1 Tape the 25 meter zero target to the E-type silhouette Ensuring that the 3 cm cut out are aligned properly Ensure a 3 cm square is also cut out of the E-type silhouette ZERO PROCEDURES TARGET PREPARATION

44. Foreign Disclosure 1 NOTE: RETIGHTEN AN/PEQ-2A AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AN/PEQ-2A AFTER INITIAL 3 ROUND SHOT GROUP ZERO PROCEDURES M16A1/2 AND M4 CARBINE M4/M16A2 Bracket Assembly EXAMPLE TOP TOP UP.5 / LEFT 1.5

45. Foreign Disclosure 1 ZERO PROCEDURES M16A4 and M4 MWS LEFT LEFT UP 3 / RIGHT 3 NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP INSIGHT EXAMPLEEXAMPLE TOP TOP UP.5 / LEFT 1.5

46. Foreign Disclosure 1 ZERO PROCEDURES M16A4 and M4 MWS TOP TOP DOWN.5 / LEFT 2 LEFT LEFT UP 2 / RIGHT 4.5 NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP PICATINNY EXAMPLEEXAMPLE

47. Foreign Disclosure 1 ZERO PROCEDURES M249 TOP TOP UP 1.25 / LEFT 2 INSIGHT NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP EXAMPLE

48. Foreign Disclosure 1 ZERO PROCEDURES M249 TOP TOP DOWN.5 / LEFT 2 PICATINNY NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP EXAMPLE

49. Foreign Disclosure 1 ZERO PROCEDURES M240B TOP TOP UP 6 / LEFT 1.7 INSIGHT NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP EXAMPLE

50. Foreign Disclosure 1 ZERO PROCEDURES M240B TOP TOP DOWN 1.5 / RIGHT 2 PICATINNY NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP NOTE: RETIGHTEN AFTER INITIAL 3 ROUND SHOT GROUP EXAMPLE

51. Foreign Disclosure 1 ZEROING PROCEDURES ADJUSTMENTS ADJUSTMENTS ALL WEAPONS AIMING POINT AIMING POINT ELEVATION 1=1cm@25 METERS WINDAGE 1=1cm @25 METERS ILLUMINATOR ILLUMINATOR ELEVATION 1=1cm@25 METERS WINDAGE 1=1cm @25 METERS Note: Field zero the illuminator Don’t field zero aiming point

52. Foreign Disclosure 1 Enabling Learning Objective F Action: Engage Targets with the AN/PEQ-2A Conditions: Given a weapon, NVD, AN/PEQ-2A, 4 AA batteries, FF scenario (if applicable), ear plugs, magazines for the M-4 if applicable and ammunition for selected weapon Standards: Shoot familiarization table with the AN/PEQ- 2A

53. Foreign Disclosure 1 Engage Targets with the AN/PEQ-2A FOUR FUNDAMENTALS: 1. STEADY POSITION: NO MORE CHEEK TO STOCKWELD M249/240B POSITION TO CONTROL GUN AND SEE TARGET POSITION TO CONTROL GUN AND SEE TARGET 2. AIM CENTER MASS 3. BREATH CONTROL NO CHANGE 4. TRIGGER CONTROL NO CHANGE FOUR FUNDAMENTALS: 1. STEADY POSITION: NO MORE CHEEK TO STOCKWELD M249/240B POSITION TO CONTROL GUN AND SEE TARGET POSITION TO CONTROL GUN AND SEE TARGET 2. AIM CENTER MASS 3. BREATH CONTROL NO CHANGE 4. TRIGGER CONTROL NO CHANGE

54. Foreign Disclosure 1 Engage Targets with the AN/PEQ-2A SCANNING IR DISCIPLINE WALKING EQUIPMENT AND POSITION

55. Foreign Disclosure 1

56. Enabling Learning Objective G Action: Qualify with the AN/PEQ-2A Conditions: Given either an M16A1/A2, M4 Carbine, Modular weapon System, M249 SAW, M60 machinegun or M240B machine gun, night vision device (NVD), 4AA batteries, ear plugs, AN/PEQ-2A Standards: Qualify on transition range IAW TM 11-5855- 308-12&P. M16A1/A2, M4 carbine and MWS: at least 17 out of 40 to qualify M249, M260 and M240B: at least 6 out of 11 to qualify

57. Foreign Disclosure 1 FF2- 50, 150 & 250 METER TARGETS SCANNING IR DISCIPLINE WALKING EQUIPMENT & POSITION ADJUSTMENTS PRACTICE QUAL 50M – 250M RECORD QUAL 50M – 250M STANDARD 17-23, 24-34 AND 35-40 TO QUALIFY

58. Foreign Disclosure 1 M249 FF 100 – 400 METER TARGETS SCANNING IR DISCIPLINE WALKING EQUIPMENT & POSITION ADJUSTMENTS PRACTICE QUAL 100M – 400M RECORD QUAL 100M – 400M 6 out of 11 TO QUALIFY 6 out of 11 TO QUALIFY

59. Foreign Disclosure 1 M240B FF 100 – 400 METER TARGETS SCANNING IR DISCIPLINE WALKING EQUIPMENT & POSITION ADJUSTMENTS PRACTICE QUAL 100M – 400M RECORD QUAL 100M – 400M 6 out of 11 TO QUALIFY 6 out of 11 TO QUALIFY

60. Foreign Disclosure 1 1.WALK THROUGH 2.PMCS 3.MOUNTING PROCEDURES 4.AN/PEQ-2A OPERATIONAL PROCEDURES Practical Exercise

61. Foreign Disclosure 1 Terminal Learning Objective 1. CHARACTERISTICS 2. PMCS 3. PUT INTO OPERATION 4. ZEROING PROCEDURES 5. FIRING TABLES AND STANDARDS 6. PRACTICAL EXERCISE 7. PERFORMANCE EVALUATION 8. WRITTEN TEST 9. FIELD FIRE 10. PRACTICE QUAL. AND QUALIFICATION

62. Foreign Disclosure 1 AN/PEQ-2ASUMMARY AN/PEQ-2A SUMMARY Check on Learning Student Evaluation QuestionsQuestions