1. © 2012 Autodesk Using Subassembly Composer on the Highway A4 Construction Project Jordy Brouwers Geonius

2. © 2012 Autodesk CI2281 This class will provide an in-depth look at using the Autodesk® Subassembly Composer. Learn how to organize your workflow and create complex subassemblies of tunnels, retaining walls, highways, and others with ease. Import and update your subassemblies into AutoCAD® Civil 3D® software, and see the result in your corridor in the complete intelligent model in Autodesk® Navisworks® software. This class uses data and real-life examples of the Highway A4 construction project in The Netherlands.

3. © 2012 Autodesk Learning Objectives At the end of this class, you will be able to:  Use Subassembly Composer  Set up workflows for creating complex subassemblies  Export custom AutoCAD Civil 3D corridors to Navisworks  Import and update custom subassemblies in Civil 3D

4. © 2012 Autodesk The Netherlands

5. © 2012 Autodesk So where’s the Netherlands? 5500miles

6. © 2012 Autodesk Our neighbors

7. © 2012 Autodesk Our neighbors

8. © 2012 Autodesk Europe

9. © 2012 Autodesk The Netherlands USAThe Netherlands Sq. Miles3,794,10116,1580.43 % Population310,673,00016,626,9005.35 % Density P / Sq.M. 821030

10. © 2012 Autodesk The Netherlands

11. © 2012 Autodesk The Netherlands

12. © 2012 Autodesk The Netherlands

13. © 2012 Autodesk The Netherlands

14. © 2012 Autodesk The Netherlands

15. © 2012 Autodesk The Netherlands

16. © 2012 Autodesk The Netherlands 29% below sea level 2/3 would flood without water protection

17. © 2012 Autodesk Traffic Jam… 8 februari 1999 : 610 miles of ‘not moving’ traffic

18. © 2012 Autodesk The Netherlands

19. © 2012 Autodesk The Netherlands

20. © 2012 Autodesk The Netherlands

21. © 2012 Autodesk The Netherlands

22. © 2012 Autodesk SubAssemblyComposer What is it?

23. © 2012 Autodesk SAC What is it?

24. © 2012 Autodesk What is SAC ?  Introduced summer 2011  Complex subassemblies without programming  Available Civil 3D 2011, 2012 en 2013

25. © 2012 Autodesk Programming subassemblies before SAC

26. © 2012 Autodesk Programming subassemblies with SAC

27. © 2012 Autodesk

33. SAC Pros / Cons

34. © 2012 Autodesk Voor- en nadelen  Easy to learn to make own subassemblies  Start with simple SA’s, and make them more complex  More intelligent than stock SA’s  Makes a nice combo with Corridor Solids  SAC Support pack (2011/2012) or SAC itself (2013) has to be installed at other PC’s  No encryption – like sending out source code  Not very user friendly on complex SA’s  No combination with custom.net code  No Pipe Network targets

35. © 2012 Autodesk SAC Installation

36. © 2012 Autodesk Installation Civil 3D 2011 & 2012 Civil 3D 2013

37. © 2012 Autodesk Installation 2013

38. © 2012 Autodesk Combination with Corridor Solids

39. © 2012 Autodesk Combination with Corridor Solids

40. © 2012 Autodesk SAC On the Highway A4

41. © 2012 Autodesk 1 subassembly

42. © 2012 Autodesk Complete Civil 3D section, no extra work

43. © 2012 Autodesk Complete Civil 3D section, no extra work. Proper use of code set styles

44. © 2012 Autodesk Corridor Solids

45. © 2012 Autodesk SAC Demo

46. © 2012 Autodesk Case 1

47. © 2012 Autodesk Case 2

48. © 2012 Autodesk Short demos

49. © 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.